SBM-40-HC LUMINUS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 20
Technical content
Applications:
- Entertainment /Stage Lighting
- Architectural Ligthing
- Spot Lighting
- Pool and Fountain Lighting
- Medical Lighting
- Fiber-coupled Illumination
- Machine Vision Features:
- High optical output at 3A: up to 280 Red lumens up to 640 Green lumens up to 4200 Blue mWatts up to 900 White lumens
- High thermal conductivity package
- Four chips with emitting area of 1 mm2 each
- Environmentally friendly: RoHS compliant
- Variable drive currents: 0.1A to 4A
- Available in RGBW combination Table of Contents Product Shipping & Labeling Optical & Electrical Characteris- Mechanical Dimensions .. 17 Packaging Specification .. 19 PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved
1145 Sonora Ct • Sunnyvale, CA 94086
Luminus surface mount LEDs are typically tested with a 20 ms input pulse and a junction temperature of 25 ºC. Expected flux values in real world operation can be extrapolated based on the information contained within this product data sheet. This method of measurement ensures that Luminus LEDs perform in the field just as they are specified. Multiple Operating Points The tables on the following pages provide typical optical and electrical characteristics. Since the LEDs can be operated over a wide range of drive conditions (currents from 0.1 A to 4A (3A for red), and duty cycle from <1% to 100%), multiple drive conditions are listed. Understanding Luminus LED Test Specifications Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’ products. PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Thermal management is critical in high power LED applications. With a thermal resistance from junction to case of 0.9 ºC/W (electrical), Luminus SBM-40-HC LEDs have industry-leading thermal resistance. This allows the LED to be driven at higher current while maintaining a low junction temperature, thereby resulting in brighter solutions and longer lifetimes. Reliability Designed from the ground up, Luminus LEDs are one of the most reliable light sources in the world today. Luminus LEDs have passed a rigorous suite of environmental and mechanical stress tests, including mechanical shock, vibration, temperature cycling and humidity, and have been fully qualified for use in extreme high power and high current applications. With very low failure rates and median lifetimes that typically exceed 60,000 hours, Luminus LEDs are ready for even the most demanding applications. Environmental Benefits Luminus LEDs help reduce power consumption and the amount of hazardous waste entering the environment. All LED products manufactured by Luminus are RoHS compliant and free of hazardous materials, including lead and mercury. Static Electricity The products are sensitive to static electricity, and care should be taken when handling them. Static electricity or surge voltage willdamage the LEDs. It is recommended to wear an anti- electrostatic wristband or an anti-electrostatic gloves when handling the LEDs. All devices, equipment and machinery must be properly grounded. It is recommended that measures be taken against surge voltage to the equipment that mounts the LEDs. Reference: APN-002815 Electrical Stress Damage to LEDs and How to Prevent It Technology Overview Luminus LEDs benefit from a suite of innovations in the fields of chip technology, packaging and thermal management. These breakthroughs allow illumination engineers and designers to achieve solutions that are high brightness and high efficiency. SBM-40-HC Product Datasheet
PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Red, Green and Blue Dominant Wavelength Bins SBM-40-HC Red, Green, Blue and White Binning Structure1,2 All SBM-40-HC LEDs are tested at 1 A for luminous flux, radiometric flux and dominant wavelength and placed into one of the following wavelength and flux bins. The binning structure is universally applied across each color of the SBM-40-HC product line. Color Min... Max Luminous Flux (lm) @ 1 A Min...Max Radiometric Flux (mW) @ 1 A Min... Max Luminous Flux (lm) @ 3 A Min...Max Radiometric Flux (mW) @ 3 A Color Wavelength Bin (FF) Minumum Wavelength (nm) @ 1 A Maximum Wavelength (nm) @ 1 A Red R1 621 627 Green G1 519 525 G2 525 531 Blue B1 449 454 B2 454 459 SBM-40-HC Product Datasheet Note 1: Luminus maintains a +/- 6% tolerance on flux measurements. Note 2: Only specific bins are available for large order, contact Luminus sales team for more information.
PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved SBM-40-HC White Chromaticity Coordinates Chromaticity Coordinates Bin Code (CW) CIEx CIEy CW1 0.3190 0.3507 0.3267 0.3370 0.3167 0.3166 0.3085 0.3302 CW2 0.3085 0.3302 0.3167 0.3166 0.3067 0.2961 0.2979 0.3096 0.2800 0.2900 0.3000 0.3100 0.3200 0.3300 0.3400 0.3500 0.3600 SBM-40-HC White CW2 CW1 SBM-40-HC Product Datasheet
Bin Kit RGB Flux White Chromaticity White Flux Ordering Part Number QE100 Full Distribution CW1,CW2 Full Distribution SBM-40-RGBW-HC41-QE100 For other bin kits, please contact a Luminus representative. Example: The ordering part number SBM-40-RGBW-HC41-QE100 refers to bin kit which consists of a RGBW, SBM-40-HC emitter, with Red Flux > 110 lm and Red DWL range of 621nm-627 nm; Green flux > 220 lm and Green DWL range of 519 nm to 531 nm; Blue power > 1100 mW and Blue DWL range of 449 nm to 459 nm; White flux >240 lm. SBM-40-HC Bin Kit Ordering Nomenclature and Ordering Part Number All SBM-40-SC RGBW products are sold in sets of flux and chromaticity bins called bin kits. Each bin kit specifies a minimum flux bin and a specific selection of chromaticity bins. The ordering part number designation is as follows: PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Product Family LED Emission Area Color Package Configuration Bin kit SBM: Multi-Chip Surface mount device, Non- Encapsulated 40: 4 dies - each 1.0 mm2 <Y>: Color R = Red G = Green B = Blue W = White HC41: 10.0 mm x 11.0 mm - Surface mount, shipped in tape & reel Flux and Chromaticity bin kit code - See available ordering codes below SBM 40 RGBW HC41 <abnnn> SBM-40-HC Product Datasheet
PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Product Family Chip Area Color Package Configuration Bin Kit Identifier Surface Mount (window) 4.0 mm2 R: Red G: Green B: Blue W: White Internal Code QEXXX SBM 40 RGBW HC41 QE<XXX> Product Shipping & Labeling Information All SBM-40-HC products are packaged and labeled with their respective bin as outlined in the tables on pages 3 & 4. When shipped, each reel will only contain one bin. The part number designation is as follows: SBM-40-HC Product Datasheet
PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Optical & Electrical Characteristics 1,2 Parameter Symbol Red Green Blue White Unit Drive Condition3 I 1.0 1.0 1.0 1.0 A Emitting Area - 1.0 1.0 1.0 1.0 mm2 Dominant Wavelength λd min 621 519 449 - nm λd typ 624 525 454 - nm λd max 627 531 459 - nm FWHM (typ.) Δλ1/2 15.1 31.8 18.1 N/A nm Chromaticity Coordinates4 (typ.) x 0.31 - y 0.32 - Forward Voltage VF min 2.3 3.0 2.7 2.7 V VF typ 2.5 3.2 3.05 3.05 V VF max 2.8 3.9 3.4 3.4 V Minimum Current 5 - 0.1 0.1 0.1 0.1 A Maximum Current 5 - 3.0 4.0 4.0 4.0 A LED Junction Temperature 5 Tj operating,max 115 150 150 150 ºC Storage Temperature Range - -40/+100 -40/+100 -40/+100 -40/+100 ºC Note 1: All ratings are based on test conditions of If = 1000 mA, Tc=25 ºC, 20 millisecond pulse. Tcase is defined on Thermal Resistance section, page 16. Note 2: Unless otherwise noted, values listed are typical. Devices are production tested and specified at 1A/mm2 for red, green, blue and white. Values provided at 3 A based on characterization and measurements at 2A/mm2. Note 3: SBM-40-HC RGBW devices can be driven at currents ranging from 0.1 A to 3 A depending on color and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to maintain the junction temperature desired to meet application lifetime requirements. Note 4: In CIE 1931 chromaticity diagram coordinates, normalized to x+y+z=1. Note 5: SBM-40-HC RGBW devices are designed for continuous operation to a maximum current as specified above. Product lifetime data is specified at recommended forward drive currents. Sustained operation at or beyond maximum currents will result in a reduction of device lifetime compared to recommended forward drive currents. Actual device lifetimes will also depend on junction temperature. Refer to the lifetime derating curves for further information. SBM-40-HC Product Datasheet
PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Optical & Electrical Characteristics6 Note 6: Flux and power values are measured using a current pulse of typical 20 ms. Luminus maintains a test measurement accuracy for LED flux and power of ±6%. Relative Luminous Flux vs. If φv/φv(1A) Single Pulse 20ms Tc = 25°;Red Relative Luminous Flux vs. If φv/φv(1A) Single Pulse 20ms Tc = 25°;Blue Relative Luminous Flux vs. If φv/φv(1A) Single Pulse 20ms Tc = 25°;Green Relative Luminous Flux vs. If φv/φv(1A) Single Pulse 20ms Tc = 25°;White SBM-40-HC Product Datasheet
Optical & Electrical Characteristics PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Vf vs. If Vf(If ) Single Pulse 20ms Tc = 25°;Red Vf vs. If Vf(If ) Single Pulse 20ms Tc = 25°;Blue Vf vs. If Vf(If ) Single Pulse 20ms Tc = 25°;Green Vf vs. If Vf(If ) Single Pulse 20ms Tc = 25°;White SBM-40-HC Product Datasheet
Optical & Electrical Characteristics PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Δ Dominant Wavelength (λd) Red Tc=25°;Red Δ Dominant Wavelength (λd) Blue Tc=25°,Blue Chromaticity Shift vs. If ΔCIEx,y = CIEx,y(If ) - CIEx,y (1A), Single Pulse 20ms Tc = 25°C,White Δ Dominant Wavelength (λd) Green Tc=25°;Green SBM-40-HC Product Datasheet
PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Optical & Electrical Characteristics6 Note 6: Flux and power values are measured using a current pulse of typical 20 ms. Luminus maintains a test measurement accuracy for LED flux and power of ±6%. Relative Luminous Flux vs. Tj φv/φv(85°C) Single Pulse 20ms If = 1A;Red Relative Power vs. Tj φv/φv(85°C) Single Pulse 20ms If = 1A;Blue Relative Luminous Flux vs. Tj φv/φv(85°C) Single Pulse 20ms If = 1A;Green Relative Luminous Flux vs. Tj φv/φv(85°C) Single Pulse 20ms If = 1A;White SBM-40-HC Product Datasheet
Optical & Electrical Characteristics PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Vf vs. Tj ΔVf = V(Tj) - V(85°C) Single Pulse 20ms If = 1A;Red Vf vs. Tj ΔVf = V(Tj) - V(85°C) Single Pulse 20ms If = 1A;Green Vf vs. Tj ΔVf = V(Tj) - V(85°C) Single Pulse 20ms If = 1A;Blue Vf vs. Tj ΔVf = V(Tj) - V(85°C) Single Pulse 20ms If = 1A;White SBM-40-HC Product Datasheet
Optical & Electrical Characteristics PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Δ Dominant Wavelength (λd) If = 1A;Red Δ Dominant Wavelength (λd) If = 1A;Green Δ Dominant Wavelength (λd) If = 1A,Blue Chromaticity Shift vs. Tj ΔCIEx,y = CIEx,y(If ) - CIEx,y , Single Pulse 20ms If = 1A,White SBM-40-HC Product Datasheet
Optical & Electrical Characteristics PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Note 7: Typical spectrum from Red, Green, Blue and White LEDs at reference current of 1 A, CW. Please contact Luminus to obtain data in Excel format. 20% 40% 60% 80% 100% 120% 380 430 480 530 580 630 680 730 780 Relative Intensity Wavelength (nm) Green Blue Red White SBM-40-HC Product Datasheet
Optical & Electrical Characteristics PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved SBM-40-HC -RGB Angular Distribution 0.2 0.4 0.6 0.8 1.0 0°10° 20° 30° 40° 50° 60° 70° 80° 90° SBM-40-HC -W Angular Distribution SBM-40-HC Product Datasheet
PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved SBM-40-HC Thermal Resistance Tj Tc Window Die Junction Die attach material Ceramic Substrate Thermal resistance junction to case, R th(j-c)_real = 1.2 oC/W (typ.),(All chips operated simultaneously) Thermal resistance junction to case, Rth(j-c)_electrical = 0.9 oC/W (typ.) (All chips operated simultaneously) Case Temperature (Tc ) = Temperature at bottom of ceramic substrate. SBM-40-HC Product Datasheet
PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Mechanical Dimensions – SBM-40-HC Emitter For prototyping purposes, please see Bergquist thermal clad boards, part #803807 (square board) or part # 803808 (star board). Available from Digi-Key or Mouser. 4.68 .15 5.75 .15 2.19 2.19 0.38 D 0.77 0.87 0.87 0.77 4.48 0.77 0.87 0.87 0.77 "A" "B" "C" DETAILD SCALE 20 : 1 BLUE RED WHITE GREEN EMITTING AREA EMITTING AREA PAD ASSIGNMENT P1 CATHODE, RED P2 ANODE, RED P3 CATHODE, BLUE P4 ANODE, BLUE P5 CATHODE, GREEN P6 ANODE, GREEN P7 CATHODE, WHITE P8 ANODE, WHITE DIMENSION NAME DESCRIPTION NOMINAL DIMENSION TOLERANCE "A" BOTTOM OF SUBSTRATE TO TOP OF WINDOW 1.21 .10 "B" BOTTOM OF SUBSTRATE TO TOP OF COPPER TRACE 0.51 .05 "C" TOP OF DIE EMITTING AREA TO TOP OF WINDOW 0.48 .07 SBM-40-HC Product Datasheet
PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Note 1: The numbers in the table are specific to SAC305. Luminus recommends using an SAC305 solder paste with a no-clean flux for RoHS compliant products. Note 2: During the pick and place process, axial forces on the dome (or window) should not exceed 0.5 Newtons (N). Note 3: Use of a multi-zone IR reflow oven with a nitrogen blanket is recommended. Note 4: Time-temperature profile of the reflow process showing the four functional profile zones are defined in IPC-7801. Temperature is referenced to the center of the PCB. Note 5: Luminus recommends to use the solder paste data sheet information as a starting point in time-temperature process development. Note 6: These are general guidelines. Consult the solder paste manufacturer’s datasheet for guidelines specific to the alloy and flux combination used in your application. Product complies to MSL Level 3. For more information, please refer to: https://luminusdevices.zendesk.com/hc/en-us/ articles/360060306692-How-do-I-Reflow-Solder-Luminus-SMD-Components- Note 7: For any technical questions about soldering process, please contact Luminus at techsupport@luminus.com. Moisture Sensitivity Level MSL 3 Profile Feature Process Window Time Average ramp-up rate Preheat 65°C - 200°C 120 - 250 sec 1 - 2.5°C/sec Soak 0.4 - 1°C/sec Reflow Spike 180°C - TL + 20°C N/A 3 - 6°C/sec Cool Down Tp to below 150°C N/A 3 - 7°C/sec Liquidus Temperature (TL) 220°C Time Above Liquidus 45 - 90sec Peak Temperature 235 - 245°C SMT Rework Guideline Manual Hotplate Reflow Hot Air Gun Reflow Heating Time < 60 sec Hotplate Temperature < 230°C < 150°C
PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved Packing Unit = 500 pcs per reel Note 1: For detailed drawing, please refer to drawing number: TO-1156. SBM-40-HC Product Datasheet
The products, their specifications and other information appearing in this document are subject to change by Luminus Devices without notice. Luminus Devices assumes no liability for errors that may appear in this document, and no liability otherwise arising from the application or use of the product or information contained herein. None of the information provided herein should be considered to be a representation of the fitness or suitability of the product for any particular application or as any other form of warranty. Luminus Devices’ product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. Nothing herein is to be construed as constituting an additional warranty. No information contained in this publication may be considered as a waiver by Luminus Devices of any intellectual property rights that Luminus Devices may have in such information. This product is protected by U.S. Patents 6,831,302; 7,074,631; 7,083,993; 7,084,434; 7,098,589; 7,105,861; 7,138,666; 7,166,870; 7,166,871; 7,170,100; 7,196,354; 7,211,831; 7,262,550; 7,274,043; 7,301,271; 7,341,880; 7,344,903; 7,345,416; 7,348,603; 7,388,233; 7,391,059 Patents Pending in the U.S. and other countries. PDS-003034 Rev.2 © 2022 Luminus Devices, Inc. - All Rights Reserved 1 11/08/2020 Datasheet release 2 02/21/2022 Add ESD information, update White Chromaticity Coordinates and Solder Profile.