SBL4030PT GE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Reverse Voltage -30 to 40 Volts Forward Current - 40.0 Amperes

FEATURES

♦ Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 ♦ Dual rectifier construction, positive center-tap ♦ Metal silicon rectifier, majority carrier conduction ♦ Low power loss, high efficiency ♦ High current capability, low forward voltage drop ♦ High surge capability ♦ For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ♦ Guardring for overvoltage protection ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.17" (4.3mm) from case MECHANICAL DATA Case: JEDEC TO-247AD molded plastic body Terminals:Lead solderable per MIL-STD-750, Method 2026 Polarity:As marked Mounting Position:Any Mounting Torque:10 in. - lbs. max. Weight:0.2 ounce, 5.6 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS SBL4030PT SBL4040PT UNITS Maximum repetitive peak reverse voltage V RRM 30 40 Volts Maximum working peak reverse voltage V RMS 21 28 Volts Maximum DC blocking voltage V DC 30 40 Volts Maximum average forward rectified current at TC =100°C I(AV) 40.0 Amps Peak repetitive forward current per leg at TC =95°C (rated VR square wave, 20 KHZ) IFRM 40.0 Amps Peak forward surge current, 8.3ms single half sine- wave superimposed on rated load (JEDEC Method) IFSM 400.0 Amps Peak repetitive reverse surge current (NOTE1) IRRM 2.0 Amps Maximum instantaneous forward voltage per leg at I F=20A, TC =25°C V F 0.58 Volts (NOTE 2) IF=20A, TC =100°C 0.50 Maximum instantaneous reverse current at TC =25°C 10.0 rated DC blocking voltage per leg (NOTE 2) TC =100°C IR 100.0 mA Typical thermal resistance per leg (NOTE 3) R Θ JC 1.2 °C/W Voltage rate of change (rated VR ) dv/dt 1,000 V/ µs Operating junction storage temperature range T JTSTG -40 to +125 °C NOTES: (1) 2.0µs pulse width, f=1.0 KHZ (2) Pulse test: 300µs pulse width, 1% duty cycle (3) Thermal resistance from junction to case per leg PIN 1 PIN 3 CASE 0.245 (6.2) 0.225 (5.7) 0.645 (16.4) 0.625 (15.9) 0.323 (8.2) 0.313 (7.9) 0.142 (3.6) 0.138 (3.5) 0.170 (4.3) 0.086 (2.18) 0.076 (1.93) 0.160 (4.1) 0.140 (3.5) 0.225 (5.7) 0.205 (5.2) 0.127 (3.22) 0.117 (2.97) 0.048 (1.22) 0.044 (1.12) 0.795 (20.2) 0.775 (19.6) 0.840 (21.3) 0.820 (20.8) 1 2 3

0.078 REF

(1.98) 0.203 (5.16) 0.193 (4.90) 10o TYP. BOTH SIDES 30o10o 1o REF. 0.118 (3.0) 0.108 (2.7) 0.030 (0.76) 0.020 (0.51) BOTH SIDES PIN 2 Dimensions in inches and (millimeters) TO-247AD *NEW PRODUCT *NEW PRODUCT *NEW PRODUCT

0.01 0.1 02 0 40 60 80 100 0.001 0.01 0.1 0.01 0.1 1 10 1000.1 100 0.1 1 10 100 100 1,000 5,000 1 10 100100 200 300 400 RATINGS AND CHARACTERISTIC CURVES SBL4030PT THRU SBL4040PT FIG. 1 - FORWARD CURRENT DERATING CURVE CASE TEMPERATURE, °C AVERAGE FORWARD CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL REVERSE CHARACTERISTICS PER LEG FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG JUNCTION CAPACITANCE, pF REVERSE VOLTAGE, VOLTS FIG . 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG t, PULSE DURATION, sec. TRANSIENT THERMAL IMPEDANCE, °C/W TJ=100°C TJ=25°C TJ=100°C TJ=25°C