SBL2030PT GE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Reverse Voltage - 30 and 40 Volts Forward Current -20.0 Amperes

FEATURES

♦ Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 ♦ Metal silicon junction, majority carrier conduction ♦ Low power loss, high efficiency ♦ High current capability, low forward voltage drop ♦ High surge capability ♦ For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ♦ Dual rectifier construction, positive center-tap ♦ Guardring for overvoltage protection ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.17" (4.3mm) from case MECHANICAL DATA Case: JEDEC TO-247AD molded plastic body Terminals:Lead solderable per MIL-STD-750, Method 2026 Polarity:As marked Mounting Position:Any Mounting Torque:10 in. - lbs. max. Weight:0.2 ounce, 5.6 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS SBL2030PT SBL2040PT UNITS Maximum repetitive peak reverse voltage V RRM 30 40 Volts Maximum RMS voltage V RMS 21 28 Volts Maximum DC blocking voltage V DC 30 40 Volts Maximum average forward rectified current at TC =105°C I(AV) 20.0 Amps Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load I FSM 250.0 Amps (JEDEC Method) Maximum instantaneous forward voltage per leg at 10.0A (NOTE 1) VF 0.55 Volts Maximum instantaneous current at T C =25°C 1.0 rated DC blocking voltage per leg(NOTE 1) TC =100°C IR 50.0 mA Typical thermal resistance per leg (NOTE 2) R Θ JC 1.5 °C/W Operating junction and storage temperature range T J, TSTG -40 to +125 °C NOTES: (1) Pulse test: 300µs pulse width, 1% duty cyle (2) Thermal resistance from junction to case per leg PIN 1 PIN 3 CASE 0.245 (6.2) 0.225 (5.7) 0.645 (16.4) 0.625 (15.9) 0.323 (8.2) 0.313 (7.9) 0.142 (3.6) 0.138 (3.5) 0.170 (4.3) 0.086 (2.18) 0.076 (1.93) 0.160 (4.1) 0.140 (3.5) 0.225 (5.7) 0.205 (5.2) 0.127 (3.22) 0.117 (2.97) 0.048 (1.22) 0.044 (1.12) 0.795 (20.2) 0.775 (19.6) 0.840 (21.3) 0.820 (20.8) 1 2 3

0.078 REF

(1.98) 0.203 (5.16) 0.193 (4.90) 10o TYP. BOTH SIDES 30o10o 1o REF. 0.118 (3.0) 0.108 (2.7) 0.030 (0.76) 0.020 (0.51) BOTH SIDES PIN 2 TO-247AD Dimensions in inches and (millimeters)

0.01 0.1 1 10 100 0.1 100 0 50 100 1500 0.01 0.1 11 0 1 0 00 100 150 200 250 300 0.1 1 10 100 100 1,000 4,000 02 04 06 08 0 1 0 0 0.001 0.01 0.1 TJ=125°C FIG. 1 - FORWARD CURRENT DERATING CURVE LEAD TEMPERATURE, °C AVERAGE FORWARD CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG JUNCTION CAPACITANCE, pF REVERSE VOLTAGE, VOLTS TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=75°C TJ=25°C TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE RESISTIVE OR INDUCTIVE LOAD TJ=125°C FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG t, PULSE DURATION, sec. TRANSIENT THERMAL IMPEDANCE, °C/W TJ=25°C f=1.0 MHz Vsig=50mVp-p 1.0 RATINGS AND CHARACTERISTIC CURVES SBL2030PT AND SBL2040PT