SB50

SB50 APP | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

• 78 - All Data Subject To Change Without Noticewww.andersonpower.com SB® 50 Connectors Up to 120 amps SB® 50 ORDERING INFORMATION Based off the design pioneered by Anderson™ in 1953, the two pole SB® connectors set the standard for DC power distribution and battery connections. SB® 50 connectors feature a one piece plastic housing using stainless steel springs to hold low resistance contacts in place. Wires sizes from 16 to 6 AWG (1.5 to 13.3 mm²) are held in the smallest of the SB ® series housings.
• Low Resistance Silver or Tin Plated Copper Contacts Allows UL rated currents up to 120 amps
• UL Rated for Hot Plugging up to 50 Amps Great for battery or other applications where the ability to interrupt circuits is required
• Wire, PCB, and Busbar Contacts Allows one connection system to meet multiple needs SB® 50 Standard Housings The smallest SB® housings work with wire contacts up to 6 AWG (10 mm²) as well as PCB, and busbar contacts. Genderless design mates with itself. Mechanical keys are color-coded.

Description

NOTE: SB® 50 Black and Gray housings have the same keying features and can be intermated. SB® 50 Chemical Resistant Housings Same features as the Standard SB® 50 but molded in a chemical resistant PBT/PC blend. Suitable for use to -40°C. NOTE: SB® 50 Black and Gray housings have the same keying features and can be intermated. [ 81.3 ] 3.20 [ 3.7 ] Ø 0.14 (2) PLC’S [ 15.9 ] 0.63 Material ID [ 35.1 ] 1.38 [ 22.5 ] 0.89 [ 19.1 ] 0.75 [ 6.4 ] 0.25 Bottom View Mated Length P = Chemical Resistant SB® 50

• 79 - All Data Subject To Change Without Notice www.andersonpower.com [ 69.1 ] 2.72 [ 2.0 ] 0.08 [ 17.1 ] 0.68 See Busbar contact drawing on website for further detail. [ 3.7 ] Ø 0.14 (2) [ 11.4 ] 0.45 [ 22.6 ] 0.89 [ 19.05 ] 0.750 [ 21.6 ] 0.85[ 8.0 ] 0.32 [ 27.4 ] 1.08 [ 35.0 ] 1.380 [ 15.6 ] 0.62 [ 63.6 ] 2.51 [ 23.7 ] 0.93 [ x ] x Top View Side View See PCB contact drawing on website for further detail. [ 25.4 ] 1.00 [ 12.19 ] 0.480 [ 1.27 ] 0.050 [ 17.5 ] 0.69[ 6.10 ] 0.240 [ 2.42 ] 0.095 [ 24.6 ] 0.97 [ 8.1 ] 0.32 [ 7.6 ] 0.30 SB® 50 Silver Plated Wire Contacts Use two silver plated contacts per housing for the best electrical performance and durability up to 10,000 mating cycles. See reducing bushings in accessory section for smaller wires. Dimensions Mating Loose Piece A - AWG mm² Force Part Numbers inches mm Minimum Quantity 1,000 100 13.3 Low 1307-BK 1307 0.22 5.59 13.3 High 5900-BK 5900 0.22 5.59 8.4 High 5952-BK 5952 0.19 4.83 12 to 10 3.3 to 5.3 Low 5953-BK 5953 0.14 3.56 12 to 10 3.3 to 5.3 High 5915-BK 5915 0.14 3.56 SB® 50 Silver Plated Busbar Contacts Use 2 busbar contacts per housing to provide a quick disconnect input or output busbar connection. Busbar contacts are for mating with wire contacts only. Part number 75BBS includes lock nuts. Locknuts must be ordered separately for B01915P1. Mating T ype Thread Force Loose Piece Part Numbers Minimum Quantity 1,000 Busbar 10 to 24 High B01915P1 75BBS Lock Nut 10 to 24 H1216P8 10G54 NOTE: Has not been tested by UL. 55A Right Angle Standard Powerclaw PCB Contacts Standard Powerclaw contacts are for use inside a SB® 50 housing and provide a color-coded right angle connection to the PCB.

T in Plated PC5930T -BK PC5930T Silver Plated PC5930S-BK PC5930S 55A Right Angle Mini Powerclaw PCB Contacts Right angle Mini Powerclaw contacts can be used on the PCB edge without a SB® 50 housing on the PCB side. A self polarizing design only allow SB® 50 wire housings to mate to PCB contacts one way. 1,000 100 T in Plated PC5934T -BK PC5934T Silver Plated PC5934S-BK PC5934S 55A Vertical Mini Powerclaw PCB Contacts Vertical Mini Powerclaw contacts save space by not requiring a SB® 50 housing on the PCB side. The guide housing is required for to provide a polarized connection. (See SB ® 50 accessories). Description Loose Piece Part Numbers Minimum Quantity 1,500 100 T in Plated PC5933T -BK PC5933T Silver Plated PC5933S-BK PC5933S [ 30.0 ] 1.18 [ 7.2 ] 0.28 [ 11.1 ] 0.44 [ 7.1 ] 0.28 A [ 12.2 ] 0.48 [ 24.3 ] 0.96 [ 9.7 ] 0.38 [2.32] 0.091 [ 10.29 ] 0.405 [ 6.25 ] 0.246 [ 1.27 ] 0.050 [ 4.98 ] 0.196 SB® 50

• 80 - All Data Subject To Change Without Noticewww.andersonpower.com

6 AWG 8 AWG

10 AWG 12 AWG

0 10 20 30 40 50 60 70 80 90 100 SB®50 Derating vs. Ambient Temperature Amperes Applied Ambient Temperature (°C) 0 10 20 30 40 50 60 70 80 90 SB® 50 Temperature Rise at Constant Current Amperes Applied Temperature Rise Above Ambient (°C) NOTE: Powerclaw charts are based on 8 AWG equivalent copper foil on board side, mated to 6 AWG conductor on wire side. Current - Temperature Derating per IEC 60512-5-2 Test 5B SB® 50 CONNECTOR TEMPERATURE CHARTS - Temperature rise charts are based on a 25°C ambient temperature. SB® 50 100 125 0 10 20 30 40 50 60 70 80 90 100110 Mini Powerclaw Derating vs. Ambient Temperature Amperes Applied SB ® 50 Ambient Temperature (°C) 0 10 20 30 40 50 60 70 80 90 Mini Powerclaw Temperature Rise at Constant Current Amperes Applied SB®50 Temperature Rise Above Ambient (°C)

• 81 - All Data Subject To Change Without Notice www.andersonpower.com SB® 50 CONNECTOR SPECIFICATIONS ELECTRICAL Current Rating Amperes ¹ UL 1977 CSA Wire-to-Wire UL 1977 (6 AWG) 120 50 Wire-to-PCB UL 1977 (6 AWG) 50 Voltage Rating AC/DC UL 1977 600 PCB Connector Recommended Voltage per IEC 60950-1 Table 2L Pollution Degree Mini Vert. Contact 522 Mini Horiz. Contact 504 Standard Contact 950 Dielectric Withstanding Voltage Volts AC 2,200 Avg. Mated Contact Resistance Milliohms ¹ 1 1/4” of 6 AWG wire 0.200 PCB Contact to Wire 0.500 UL Hot Plug Current Rating Amperes - 250 Cycles at 120V DC Wire to Wire 50A PCB to Wire (Vertical Mini Powerclaw) 40A MECHANICAL Wire Size Range AWG mm² Wire Contacts with Bushings 16 to 6 1.3 to 13.3 Max. Wire Insulation Diameter in. mm 0.440 11.200 Operating Temperature ² °F °C Standard -4° to 221° -20° to 105° Chemical Resistant* -40 to 221° -40° to 105° *Chemical resistant material not available for PCB guide housings Mating Cycles No Load by Plating Silver (Ag) Tin (Sn) Wire and PCB Contacts 10,000 1,500 Avg. Mating / Unmating Force Lbf. N Wire to Wire Low Force Contacts 10 44 Wire to Wire High Force Contacts 15 67 Standard Powerclaw to Wire 15 66 Mini Powerclaw to Wire 8 36 PCB Specifications Mounting Style Plated Through Hole Max PCB Thickness- in. (mm) Standard: 0.15 (0.381) Mini: 0.25 (0.635) Recommended Traces 8 AWG Cross Section Min. Contact / Spring Retention Force Lbf. N Wire Housing 50 222 Min. Creepage / Clearance Distance in. mm Standard Powerclaw 0.374 9.5 Mini Vert. Powerclaw 0.213 5.4 Mini Horz. Powerclaw 0.205 5.2 Mechanical Shock MIL-STD-202 213 Condition A 50g’s Vibration High Frequency 4 MIL-STD-202 204 Condition A 10g’s MATERIALS Housing Standard Plastic Resin Polycarbonate Chem. Resistant Resin Polycarbonate / PBT blend Contact Retention Spring Stainless Steel Housing Flammability Rating UL94 V-0 Glow Wire 960°C (GWFI) / 800°C (GWIT) Contact Base Copper Alloy Wire Plating Silver PCB Plating Sn or Ag over Ni Contact Termination Methods Crimp ³ Wire Contacts Hand Solder Wire and PCB Contacts Solder Dip PCB Contacts Wave Solder PCB Contacts Wrench / Socket Busbar Contacts SB® 50 NOTE 1: See IEC 60664-1 for working voltage. NOTE 2: Amp ratings are stated per position and based on all positions being fully loaded. 1 - Based on: 105°C rated or better cable of the largest size. Properly calibrated APP® recommended tooling, and a 25°C ambient temperature. UL rating not to exceed the maximum operating temperature. CSA rating below a 30°C temperature rise. 2 - Limited by the thermal properties of the connector plastic housing. 3 - Use APP® recommended tooling only. Alternate tools may adversely affect the performance of our connectors along with UL and CSA recognition. 4 - Tested with contact part number 5900. * UL Rated for 65°C largest wire or cable size.

• 82 - All Data Subject To Change Without Noticewww.andersonpower.com “T” Handle * The “T” handle makes mating and unmating the connector easier. The non-conductive red plastic material is strong and safe. (2) Self tapping screws are used to secure the handle to the connector housing.

1,000 Red “T” Handle + Hardware Bag SB50-HDL-RED Hardware Bag (2 Screws) 104G17 Red “T” Handle Only 13899P1 #8 x 5/8” Screw (Order 2 Per Handle) 120P55 * Torque value 12 (in - lbs) / 1.4 (Nm) “A” frame handle for SB® 50 * Handle makes mating and unmating the connector easier. The non-conductive gray plastic material is strong and safe. Machine screws and locknuts included. Description Part Number Minimum Quantity 200 Gray “A” Handle & Hardware 997G1 * Torque value 12 (in - lbs) / 1.4 (Nm) Dust Cover Prevents dust and dirt from entering the mating interface of the connector when unmated. NOTE: Not a Hermetic Seal. Description Part Numbers Minimum Quantity 500 Dust Cover with Lanyard Strap, Red 13890P1 134G1 SB® Accessories (2) Self-tapping Screws Handle Connector Housing Screws Handle Connector Housing not Included Locknuts Slide cover over mating end. Housing not included. SB® 50 ATTRIBUTES SB® 50 AMP Rating AC/DC 50 Voltage Rating AC/DC (Steady State) 250 Breaking Capacity - AMP Rating / Cycles 50 / 10 Cycles Voltage Rating (Breaking Capacity) 220 VDC Finger Safety - Mated Only IEC 60529 - IP20 Wire Size Tested 16 mm² Contact Series Tested 5900/1307 Climatic Testing (Cold, Heat & MFG) IEC 60512 Test -11j, 11i & 11g Cycle Life IEC 60512 Test 9a - 5,000 Cycles Mechanical Strength Impact IEC 60512-5 @ 29.5 Inches - Dropped 8 times Temperature Range -20°C to 105°C -4°F to 221°F PROTECTION Touch Safety with Wire Contacts & PCB Mating Interface IEC 60529 IP10 unmated Environmental Sealing with Boots IEC 60529 IP64 Connector Series Configurations Creepage / Clearance per IEC 60950-1 Material Group SB® 50 Unmated 2.99 mm IIIa Mated 2.99 mm IEC INFORMATION

• 83 - All Data Subject To Change Without Notice www.andersonpower.com IDLength Wire Entrance 990 990G1 5905 Self attaching discrete conductor Bolt on discrete conductor Bolt on bundled conductors The given wire O.D. information is an estimate. Cable clamps should be evaluated for performance with the actual wire to be used. SB® Environmental Boots SB® Environmental Boots provide water, dirt, chemical and UV protection for SB® 50 connectors. The durable boots shield the connectors from water and dirt to IP64 in both the mated and unmated condition.

SB® 50 Environmental Boot (with cover), Load 3-6054P2-BK 3-6054P2 SB® 50 Environmental Boot (with cover), Source 3-6055P2-BK 3-6055P2 SB® 50 Environmental Boot (no cover), Load 3-6054P1-BK 3-6054P1 SB® 50 Environmental Boot (no cover), Source 3-6055P1-BK 3-6055P1 Guide Housings for Vertical Mini Powerclaw Contacts Prevents polarity being reversed when a SB® 50 is mated to vertical mini Powerclaw contacts. Minimum Quantity 1,000 Black Guide Housing PC-HSG-SB-BK PC-HSG-SB Cable Clamps Durable metal cable clamps securely hold cables to prevent accidental strain or pulls from dislodging wire or contacts from the housing. Cable clamps are recommended for solder terminated wires. Cable Size A WG or mm² or (Inches O.D.) (mm O.D.) Part Numbers Minimum Quantity 500 Self Attaching for Discrete Conductor 8 to 6 990-BK 990 Self Attaching for Discrete Conductor 12 to 10 4 to 6 990G2-BK 990G2 Bolt on for Discrete Conductor 12 to 6 4 to 10 990G1-BK 990G1 Bolt on for Bundled Conductor 0.320 to 0.450 4.27 to 1 1.43 5905-BK 5905 Torque value 12 (in - lbs) / 1.4 (Nm) NOTE: For assembly of cable clamp to housing only Reducing Bushings Use with contact part number 5900-BK or 1307-BK to allow a smaller wire to be used with the connector. Electrical capability is derated with smaller wire. Dimensions Contact Barrel Size Wire Size - ID - - Length - A WG mm² AWG mm² Part Numbers inches mm inches m m Minimum Quantity 3,000 1,000 100 6 13.3 8 8.4 5912-BK 5912 0.18 4.57 0.45 1.43 6 13.3 12 to 0 3.3 to 5.3 5910-BK 5910 0.14 3.56 0.47 1.94 6 13.3 16 to 14 1.3 to 2.1 5913-BK 5913 0.09 2.29 0.47 1.94 A B C Dimensions - A - - B - - C - in. mm in. mm in. mm SB® 50 PCB SB® 50 Connector Mini-vertical Powerclaw Contacts Guide Housing

• 101 - All Data Subject To Change Without Notice www.andersonpower.com Wire Size Loose Piece Part Number Loose Piece Contact Crimp Tools AWG mm² Silver Plating Hand Tool OR Pneumatic Tool + Die + Locator Number of Crimps SB® 50 6 13.3 1307 1309G4 1387G1 1388G6 1389G6 Single 5900 8 8.4 5952 10 to 12 5.3 to 3.3 5953 1388G7 1389G7 5915 SB® 120 1 42.4 1323G1

1368 Series 1387G1

2 33.6 1319 1388G44 21.2 1319G4 6 13.3 1319G6 SB® 175 1/0 53.5 1382

1368 Series

1387G2 1303G13 1304G32 Double 1 42.4 1347 2 33.6 1383 4 21.1 1384 6 13.3 1348 1387G1 1388G4 1389G3 Single SB® 350 350 mcm 185 910 4/0 107.2 908 1387G2 1303G3 1304G31 3/0 85 916 1303G122/0 67.4 907 1/0 53.5 917 NOTE: See website for the most current information. SB® Tooling Information SB® 2/0 Tooling Information Wire Size Loose Piece Part Number Loose Piece Contact Crimp Tools AWG mm² Silver Plating Hand Tool OR Pneumatic Tool + Die + Locator Number of Crimps 2/0 53.5 1328G1 1368 1387G2 1303G12 1304G32 Double NOTE: See website for the most current information. SB® TOOLING Your Best Connection™ 2020-0055 DS-SB50 REV C7 Anderson™ will use reasonable efforts to include accurate and up-to-date content in the data sheet. All product information contained in the data sheet including ordering information, illustrations, specifications, and dimensions, are believed to be reliable as of the date of publishing, but is subject to change without notice. Anderson™ makes no warranty or representation as to its accuracy. Content in the data sheet may contain technical inaccuracies, typographical errors and may be changed or updated without notice. Anderson™ may also make improvements and/or changes to the products and/or to the programs described in the content at any time without notice. Current sales drawings and specifications are available upon request. ©2020 Anderson Power Products, Inc. All rights reserved. APP®, A®, Anderson Power Products®, SB® and the APP Logo are registered trademarks of Anderson Power Products, Inc. Anderson™ and Your Best Connection™ are trademarks of Anderson Power Products, Inc.