SARS SANYOU | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • 35A switching capability.
  • NO type and CO type are avaliable
  • Satisfy RoHS and ELV SANYOU RELAYSRelays for advanced technology Automotive Relay version:V1.4 (1) (2) Model Max. continuous current Max. switching current Max. switching voltage SARS 35A connect (NO):150A , disconnect(NO):35A see performance curve (1) (2) Contact Data

2 AgSnO 2

Contact Current(A) duty factor endurance （cycles） contact material test ambient 1C﹑1A NO NC OFF S off 23℃ ON S 1x10 5 Note: If the load condition is not in the table. Please contact SANYOU with load details to get more support (at 10,800 ops./h) 1x10 see contact parameter table Contact material contact voltage drop Operate time Release time Initial insulation resistance Initial dielectric strength Vibration resistance Shock resistance Endurance Ambient temperature Note： Silver alloy 200mv/at 10A (max) 10msec. Max. 10msec. Max. 100MΩ Min.(DC500V) Between open contacts： AC500V， 50/60Hz 1min. Between coil and contact： AC500V， 50/60Hz 1min. Mechanical Electrical -40℃～+125℃ (no condensation) Approx.17.5 g 10~25Hz 1.27mm double-amplitude 25~500Hz 98m/s2 NO 20G/ NC 5G （3）Rated voltage step up to 0VDC，And measurement without coil suppression circuit； (5) (6) (3) mechanical behavior Cover retentivity：（pull and press）≥200N Terminals retentivity：（ ）≥100Npull and press Terminals bending stiffness：（all directios）≥10N Unit weight （2） ，14VDC；surge current in lamp load ( 1）For the normally open contact，the measurement of the 100% rated voltage is applied to the coil （4）The leakage current is less than 1mA； (4) （5）When the excitation is excited,the opening time of the normally open contact is less than 1ms;when no excitation,the normally closed contact time is less than 1ms,at the same time,the normally open contact can not be closed； （6）Test point for the distance 2mm from the end foot,when the test force is removed,the lead foot should be less than 0.5mm ； temperature

Ordering Information

Outline Dimensions, Wiring Diagram (unit：mm) Unless otherwise specified： If dimension ＜1mm, tolerance： ±0.2mm; If dimension 1~5mm, tolerance： ±0.3mm; If dimension ＞5mm, tolerance： ±0.4mm. Note： 1. Extended terminal dimension is dimension before soldering. 2. Tolerance of m h s：±0.1mm.ounting ole Accessory Form：Nil-Without accessory, D-With R-With resistor , DC-With diodes(see wiring diagram)diode, Contact Form：Nil-Form C, M-Form A Coil Power： Coil Voltage (VDC)：12,24 Number of Poles：1-1 Pole Protective Construction：Nil-Dust cover SH-Sealed type washable Type Designation：SARS Special Parameter：Nil-Standard type, Letter or number-Special requirement S-Flux proofed (at 20℃)Coil Data 22.5 2511 3.25 4.35 6 8 3.25 1.8±0.11.3±0.1 120 --- 680 --- 102 ≤60% ≥10% 15.6 1.2 1.4 100 120100 15.6 12 90 680 79.5 15.6 1.8 480 480 2700 --- --- 407.5 31.2 31.2 1.2 1.4 133 24 66.7 360 2700 317.6 31.2 31.2 1.8 ≤60% ≥10% Parallel (Ω) Equivalent (Ω) Pick-up (VDC) Drop-out (Min.) Nominal (W) Max. AllowableNominal (VDC) voltage Nominal operating current ±10% (mA) Coil resistance resistance resistance voltage voltage voltage operating power

1、Max. Allowable load range Switching current（A） Wiring Diagram (bottom view) Typical Applications Characteristic Curves

  • Heater, fan control, fuel pump control, wiper control, headlight control.
  • Car air conditioner, electromagnet control, lighting control, interlocks, office equipment, etc. Disclaimer: This datasheet is the customers' reference. All the specification are subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application.Thus the user should in a right position to choose the suitable product for their own application.If there is any query, please contact Sanyou for the technical service.However it is the user's responsibility to determine which product should be used only. Dongguan Sanyou Electrical appliance Co.,LTD,All rights of Sanyou to reserved with not accessory with risistor with diode(D type) with diode(DC type) Switching voltage（VDC） 50 1 5 10 20 30 40 50 1000.1 0.5 instruction：This figure is a case study of the open side NO 110 130 95 100 105 110 115 120 125 130 135 140 145 150 35A 20A coil voltage（Rated voltage） environment temperature（℃） 140 2.coil continuous voltage range instruction：when the relay coil is applied to the maximum continuous operating voltage,the contact should not be loaded