SARJ SANYOU | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

SANYOU RELAYSRelays for advanced technology Automotive Relay SARJ-Series

  • 70A Contact switching capability
  • High working temperature 125℃
  • 1 Form A contact available
  • Fluxproof and sealed type available
  • Resistance or diode paralleled type available Model Nominal Switching capacity Max. switching current(normal) Max. persistent current Contact Capacity SARJ normal:70A 14VDC FormU:10A 80VDC on(NO):200A (surge current in lamp load，14VDC) 70A at23℃ 5 0A at85℃ 22S AgSnO2 AgSnO2 AgSnO2 off on off on off on 14VDC res. motor lamp Contact rating Load type contact rating Form A 1-1pole 150 200 duty factor endurance contact off(NO):70A (resistive load,14VDC) Wiring Diagram for different Loads: a.Time ratio of Peak current:Stable current is 1:10. a a Motor LoadResistive Load Lamp Load voltage current(A) (cycles) material M version:V2.0 1x105 1x105 1x105 Contact Data (res.load)

133.33 133.33 --- 680 --- Approx. 1.6 Approx. 1.8 Coil (at 20℃) Nominal (VDC) Coil Data Coil Power (W) Parallel (Ω) Equivalent (Ω) Pick-up (Max.) Drop-out (Min.) Approx. 1.6 Approx. 1.8 66.7 66.7 360 360 2700 320 --- --- 150% of 60% of 10% of 1x10 cycles See the contact parameters table Contact Material Dropping Voltage of Contacts Operate Time Release Time Initial Insulation Resistance Initial Dielectric Strength Vibration Resistance Shock Resistance Endurance (operate) Ambient Temperature Unit Weight Characteristic Data (10,800 ops./h) (900 ops./h) Silver Alloy 10msec. Max. 100MΩ Min.(DC500V) OP/OP： AC500V，50/60Hz for 1min. IP/OP： AC500V，50/60Hz for 1min. Mechanical Electrical -40℃～+125℃(no condensation) Approx. 36.0g 5～22.3Hz at double amplitude of 10 mm NO 30G 22.3~500Hz 98m/s Voltage Nominal Operating Current Max. Voltage Voltage Voltage Nominal Voltage Nominal Voltage Nominal Voltage

Ordering Information

SARJ -S - 1 12 D -X XR Special Parameter：Nil-Standard type， Contact Form：M-Form A，U-Form U Coil Power：D-1.6W/1.8W Coil Voltage(VDC)：12，24 Number of Poles：1-1 Pole Protective Construction:Nil-Dustproof,S-Fluxproof Type Designation：SARJ M F Mounting type : Nil-without bracket，F-with iron Accessory Form: Nil-without accessory, R-with resistor D-with diode(see wiring diagram) DC-with diode(see wiring diagram) Structure type: TC-Collision Response type(see wiring diagram) Collision Response acceleration The relay will respond when acceleration is ＞ 30g 11msec. The relay will not respond when acceleration is ＜10g 11msec. Ordinary type:10msec.Max. with resistor or diode type :15 msec. Max. 200mv/at 10A (max) (mA)±10% ±10%(Ω) Resistance Resistance Resistance allowable T 01-terminal without hole bracket，P-PCB type Nil-Standard type,T-Collision Response type (T/TC Type)

Outline Dimensions, Wiring Diagram Standard Type With Bracket Type Unless otherwise specified: If dimension ＜ 1 mm, tolerance:±0.2mm; If dimension 1-5 mm, tolerance:±0.3mm; If dimension ＞5 mm, tolerance:±0.4mm; Note:1,Extended terminal dimension is dimension before soldering. 2,Tolerance of mounting holes:±0.1mm PCB type T Type TC Type P.C.B. Layout

  • rear window defogger、battery breaking device、automotive AC、foglight control、headlight control
  • electric power distributor、ABS、traction control system. Disclaimer： This datasheet is the customers’reference. All the specification are subject to change without notice. We could not evaluate all the performance and parameters for every possible application. Thus the users should be in a right position Dongguan Sanyou Electrical Appliances Co.,Ltd. All rights reserved by Sanyou Characteristic Curves continuous coil voltage range Max.continuous coil voltage (Standard type) Max.continuous coil voltage (High Power type) Operate voltage after continuous energization Initial operate voltage 200 180 160 140 120 100 线圈额定电压百分比 -40 -20 0 20 40 60 80 100 120 Ambient temperature（℃） 10 50 Max.allowable load range Contact voltage（VDC） Contact current(A) to choose the suitable product for their own application. If there is any query, please contact Sanyou for technical service. However it is the users' responsibility to determine which product should be used only.