SARH SANYOU | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- 30A switching capability
- 1 Form A contact configuration available
- Resistance or diode paralleled type available
- Quick connect terminal
- Compare to same type product,overall height sharply falling Contact Capacity Model Nominal switching capacity(res,load) Max.switching current Max.switching voltage Max.switching power Contact rating voltage Load type contact rating current(A) A Form 1-1pole on/off endurance (cycles) contact material lamp load general resistive lamp load general resistive Note:The table above is point to coil without diode paralleled and resistance components,if Sanyou for technical service. they are required,please contact Charateristic Data Between open contact: Between coil and contact: (at 10,800ops./h) Mechanical (at 900ops./h) Electrical -40℃～+125℃(no condensation) Approx.14g cycles version:V1.4 ordinary type:5msec. Max. with resistor or diode type :15 msec. Max. Dropping Voltag e of Contac ts 200mV/at 10A (max.) 10～60Hz at double amplitude of 0.35 mm 60~500Hz 49m/s NO 20G See the contact parameters table 1X107 1X105 1X105 1X105 1X105 1X105 1X105 Contac t material Contact Data
(at )20℃Coiol Data Nominal voltage (VDC) Nominal operating current ±10% (mA) Coil resistance ±10% (Ω) Pick-up voltage (Max.) Drop-out voltage (Min.) Max. allowable voltage Nominal operating power(W) Parallel resistance (Ω) Equivalent resistance (Ω) 130% of nominal voltage
Ordering Information
Protective Construction：S-Flux proofed SH-Sealed type washable Coil Voltage (VDC)：06,09,12,24,48 Type Designation：SARH Number of Poles：1-1 Pole Special Parameter：Nil-Standard type, Letter or number-Special requirement Contact Form: M-FormA Accessory Form:Nil-w/t accessory,R-with resistor ,D-with diode, DC-with diode(see wiring diagram)
w/t accessory with resistor with diode(D type) with diode(DC type) (bottom view) SARH Outline Dimensions, Wiring Diagram (unit :mm) Unless otherwise specified： If dimension ＜1mm, tolerance： ±0.2mm; If dimension 1~5mm, tolerance： ±0.3mm; If dimension ＞5mm, tolerance： ±0.4mm. Note： 1. Extended terminal dimension is dimension before soldering. wiring diagram(bottom view) Typical Applications
- Heater,fan control,fuel pump control,wiper control,headlight control
- Car air conditioner,electromagnet control,lighting control,interlocks,office equipment,etc. Characteristic Curves Max.Allowable load range switching current(A) switching voltahge(VD Disclaimer: This datasheet is the customers' reference. All the specification are subject to change without notice. We could not evaluate all the performance and all the parameters for every possible application.Thus the user should in a right position to choose the suitable product for their own application.If there is any query, please contact Sanyou for the technical service.However it is the user's responsibility to determine which product should be used only. Dongguan Sanyou Electrical appliance Co.,LTD,All rights of Sanyou to reserved