SARDN SANYOU | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

SANYOU RELAYSRelays for advanced technology Contact Capacity Miniature PCB SARDN-Series

  • Max.Switching Capability:35A，Low Power 0.6W/0.8W
  • Microminiature, Standard PCB Type
  • High Vibration and Shock Resistance 1x10 See the contact parameters table Contact Material Dropping Voltage of Contacts Operate Time Release Time Initial Insulation Resistance Initial Dielectric Strength Vibration Resistance Shock Resistance Endurance(operations) Ambient Temperature Unit Weight Characteristic Data 2 2 0.2 2 Res. Motor Contact Voltage Load Type Contact Curren t(A) Duty Factor Electrical Endurance NO NC on (S) off (S) off on Note: the above parameters for the standard. on 2x10 14VDC 30 2 2Res. off on 20 ___40(2) 15(2) 1x10 5 2x10 5 (1) Contact Data NO 10G/NC 5G Mechanical (10,800ops./h) Electrical(720ops./h) -40℃~+125℃ ( no condensation) Approx. 6.0g (1) Automotive Relay Max.Switching Voltage Version:V1.0 10～55Hz at double amplitude of 1.5 mm Max.Switching Current Nominal Load(Res.) Model SARDN 20A 14VDC 35A (14VDC) 30VDC Silver Alloy 200mV/at 10A (max) 10msec. Max. 5msec. Max. 100MΩ Min.(DC500V) OP/OP： AC500V， 50/60Hz 1min. IP/OP： AC500V， 50/60Hz 1min. off cycles (cycles)

130% of nominal voltage 57.5% of nominal voltage 10% of nominal voltage Approx. 0.80W 1 6 0.365 0.365Flashlight Contact Voltage Load Type Contact Current(A) Duty Factor Electrical Endurance NO NC on (S) off (S) off on off on 2x10 14VDC 6x21W 1 9 Lamp off on 90 8.8 _ 6 1x10 5 2x10 5 Lamp (3) 3x21W Note:(1) Material of spring is high conductive (2) It means the surge current of motor LRA (3) Initial peak current of filament Coi l Resistanc e Max continuous Voltage Pick-up Voltage (Max.) Drop-out Voltage (Min.) Nominal Operating Power 130% of nomi nal voltage 60% of nomi nal voltage 10% of nominal voltage Approx. 0.60W (at 20℃) Nominal (VDC) Voltage Coil Data (1) (1) (1) Nominal Current (VDC)

Ordering Information

Contac t Form：Nil-Fo rm C，B-Fo rm B，M-Fo rm A Coil Power：D-0.6W，H-0.8W Coil Voltag e(VDC)：06，09，12，18，24 Number of Poles：1-1Pole Protecti ve Constr ucti on:S-Fluxproof,SH-sealed typ e washable Type Designation：SARDN Contact Material： Nil-AgSnO2，5-Cu plated with La Special Parameter：Nil-Standard Type, 01- The material of is Phosphor bronze Letter or Number-Special requirement Moveable Spring 100.00 66.67 50.00 33.33 25.00 133.33 89.00 66.67 44.44 33.33 135 240 540 960 101 180 405 720 (cycles)

  • Auto door lock motor control, home appliances, office equipments, anti-thief system, etc. 10 20 30 40 50 10 20 30 40 50 Lock Motor Res. Load Coil Current（A） Contact Voltage（VDC） 120 100 Load Current 20A Load Current10A Load Current 0A 0.8W 0.6W 0.8W 0.6W 0.8W 0.6W Coil Power 0 10 20 40 Temp. Rise（K） Time（Min.） Endurance Curves Max. Switching Power Coil Temp. Rise(at 23℃) Operations（×10000次） Contact Current（A） 1b 1a1c 2.610.2 4-Ф1.4 2.610.2 4-Ф1.45-Ф1.4 10.2 2.6 W (Bottom View)iring Diagram PCB Layout(Bottom View) Outline Dimensions, Wiring Diagram, PCB Layout (Unit:mm) Unle ss othe rwis e spec ifie d: If dime nsio n ＜ 1 mm, tole ranc e:±0.2 mm; If dime nsio n 1-5 mm, tole ranc e:±0.3 mm; If dime nsio n ＞5 mm, tole ranc e:±0.4 mm; Note :1, Extend ed termin al dimens ion is dimens ion before solder ing . 2,Tolera nce of mounti ng holes: ±0.1mm Disclaimer： This datasheet is the customers’reference. All the specification are subject to change without notice. We could not evaluate all the performance and parameters for every possible application. Thus the users should be in a right position to choose the suitable product for their own application. If there is any query, please contact Sanyou for technical service. However it is the users' responsibility to determine which product should be used only.