SA220A(CA)-G

SA5V0-G COMCHIP | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

-Glass passivated chip. -Low leakage. -500W peak pulse power capability with a 10/1000μs waveform, repetitive rate (duty cycle): 0.01%. -Uni and Bidirectional unit. -Excellent clamping capability. -Very fast response time. Mechanical data SA5V0-G Thru. SA191-G Series QW-BTV16 Comchip Technology CO., LTD. Peak power dissipation with a 10/1000μS waveform (Note 1) Peak pulse current with a 10/1000μS waveform (Note 1) Power dissipation on infinite heatsink at O TL=75 C Peak forward surge current, 8.3ms single half sine-wave uni-directional only (Note 2) Maximum instantaneous forward voltage at 25A for uni-directional only (Note 3) Value UnitsSymbolCharacteristics PPP IPPM PD IFSM VF TJ,TSTG 500 See Next Table 3.0 3.5/5.0 -55 to +150 W A W A V O C Dimensions in inches and (millimeter) DO-15 1.000(25.40) MIN. 0.300(7.63) 0.230(5.85) 0.142(3.61) 0.102(2.60) 0.033(0.84) 0.028(0.71) 1.000(25.40) MIN. -Case: Molded plastic DO-15 -Terminals: Axial leads solderable per MIL-STD- 202, Method 208 -Polarity: Color band denotes positive end (cathode) Operating junction and storage temperature range NTOES: (1) Non-repetitive current pulse per fig.5 and derated above TA=25°C per fig. 1. (2) Measured on 8.3 ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum. (3) VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V. -Epoxy: UL 94V-0 rate flame retardant -Mounting position: Any -RoHS compliant. Maximum Ratings and Electrical CharacteristicsRatings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.

RATING AND CHARACTERISTIC CURVES (SA5V0-G thru SA191-G) Pulse Width, (μS)td 1001010.1 Fig.4 Peak Pulse Power Rating Curve 0.1 100 O Ambient Temperature, (TA C) Fig.1 Pulse Derating Curve Peak Pulse Derating Percentage of Peak Power or Current,(%) 140 Time, (mS) Fig.5 Pulse Waveform Peak Pulse Current, (%) 1 2 3 4 Comchip Technology CO., LTD. Page 2 REV:A 50 100 200150 100 Axial Lead Transient Voltage Suppressor 100001000 25 125 100 120 td Pulse width (td) is defined as the point where the peak current decay to 50% of IPP tr=10μS Peak value IPP Half value IPP/2 10/1000μS waveform as defined by R.E.A. O Lead Temperature, (TL C) Fig.3 Steady State Power Derating Curve Steady State Power Dissipation, (W) 0.5 1.5 3.5 25 75 100 200 1.0 3.0 50 125 150 2.5 2.0 Number of Cycles at 60Hz Fig.2 Maximun Non-Repetitive Surge Current P a For a d urg Cur e t, A)e k w r S e r n ( 10 100 8.3mS single half sine-wave (JEDEC method) TJ=TJ max. 175 TJ=25 C O Fig.6 Typical Junction Capacitance Junction Capacitance, (pF) 100 10 100 10001 Reverse Breakdown Voltage, (V)VBR 10000 Bi-directional @zero bias Uni-directional @zero bias Uni-directional @VRWM Bi-directional @ VRWM TJ=25 f=1.0MHz O C 1000 175 Peak Power (kW)

Comchip Technology CO., LTD. Page 3 REV:A Axial Lead Transient Voltage Suppressor UNI BI Maximum Reverse Surge Current @ 10/1000us sinewave IPP (A) Maximum Clamping Voltage @IPP VC (V) Marking Code Part No Maximum Reverse Leakage @VRWM RI (uA) Working Peak Reverse Voltage VRWM (V) SA5.0A SA6.0 SA6.0A SA6.5 6.5ASA SA7.0A 7.5SA 7.5ASA 8.0SA 8.5SA 8.5ASA 10SA 11 SA 11ASA 12 SA 12ASA 13ASA 14SA 14ASA 15SA 15ASA 17SA 17ASA 18SA 18ASA 19SA 19ASA 20 SA 20ASA 22SA 22ASA 24ASA 28SA 28ASA 30 SA 30ASA 33 SA 33ASA 16SA 16ASA 26 SA 26ASA 10ASA 13 SA SA8.0A 36SA 36ASA 7.0SA 9.0SA 9.0ASA 24 SA SA5.0C SA5.0CA SA6.0C SA6.0CA SA6.5C 6.5CASA SA7.0CA 7.5CSA 7.5CASA 8.0CSA 8.5CSA 8.5CASA 10CSA 11C SA 11CASA 12C SA 12CASA 13CASA 14CSA 14CASA 15CSA 15CASA 17CSA 17CASA 18CSA 18CASA 19CSA 19CASA 20C SA 20CASA 22CSA 22CASA 24CASA 28CSA 28CASA 30C SA 30CASA 33C SA 33CASA 16CSA 16CASA 26C SA 26CASA 10CASA 13C SA SA8.0CA 36CSA 36CASA 7.0CSA 9.0CSA 9.0CASA 24C SA VBR Min. (V) IT (V) (mA) VBR Max. Breakdown voltage V@ IT

REV:A QW-BTV Comchip Technology CO., LTD. VBR Min. (V) UNI BI Maximum Reverse Surge Current @ 10/1000us sinewave IPP (A) Maximum Clamping Voltage @IPP VC (V) Marking Code Part No Breakdown voltage V@ IT Maximum Reverse Leakage @VRWM IR (uA) Working Peak Reverse Voltage VRWM (V) SA 40C SA40CA 43CSA 43CASA 45CSA 45CASA 48CSA 48CASA 51CSA 51CASA 54CSA 54CASA 58CSA 58CASA 60CSA 60CASA 64CSA 64CASA 70CSA 70CASA 75CSA 75CASA 78CSA 78CASA 85CSA 85CASA 90CSA 90CASA 100CSA 100CASA 110CSA 110CASA 120CSA 120CASA 130CSA 130CASA 150CSA 150CASA 160CSA 160CASA 170CSA 170CASA 80CSA 80CASA 140CSA 140CASA IT (mA) (V) VBR Max. SA 40 SA40A 43SA 43ASA 45SA 45ASA 48SA 48ASA 51SA 51ASA 54SA 54ASA 58SA 58ASA 60SA 60ASA 64SA 64ASA 70SA 70ASA 75SA 75ASA 78SA 78ASA 85SA 85ASA 90SA 90ASA 100SA 100ASA 110SA 110ASA 120SA 120ASA 130SA 130ASA 150 SA 150ASA 160 SA 160ASA 170SA 170ASA 80SA 80ASA 140SA 140ASA Axial Lead Transient Voltage Suppressor 180CSA 180CASA 180 SA 180ASA

REV:A QW-BTV Comchip Technology CO., LTD. 190SA 190CSA 190CASA SA190A 1) Suffix ‘A’ denotes 5% tolerance devices. Without ‘A’ denotes 10% tolerance devices. 2) Add Suffix ‘C’ or ‘CA’ after part number to specify Bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double. Note: Axial Lead Transient Voltage Suppressor VBR Min. (V) UNI BI Maximum Reverse Surge Current @ 10/1000us sinewave IPP (A) Maximum Clamping Voltage @IPP VC (V) Marking Code Part No Breakdown voltage V@ IT Maximum Reverse Leakage @VRWM IR (uA) Working Peak Reverse Voltage VRWM (V) IT (mA) (V) VBR Max.

Comchip Technology CO., LTD. Page 6 REV:A QW-BTV16 Comchip Technology CO., LTD. Page 6 REV:A B Taping Specification For Axial Lead Diodes(For Reel Package) E T Z T E D D 90℃±5℃ Do w B Z T E DL1-L2 DO-15 SYMBOL A (mm) (inch) 0.039 (max) 72.0 ± 3.0 SYMBOL (mm) (inch) 2.835 ± 0.118 D1 DO W 85.7 ± 0.3 3.374 ± 0.012 16.6 ± 0.4 0.654 ± 0.016 DO-15 Axial Lead Transient Voltage Suppressor D -15O Standard Packaging Case Type 4,000 REEL ( pcs ) Reel Size (inch) REEL PACK

Comchip Technology CO., LTD. Page 7 REV:A B Taping Specification For Axial Lead Diodes (For Ammo Package) B Z T E L1-L2 DO-15 SYMBOL A (mm) (inch) 0.039 (max) E T Z T E 90℃±5℃ Standard Packaging L H W Case Type Ammo Package DO-15 Box / Carton 10 20 Inner BOX ( K ) CARTON ( K )(EA) Inner DimensionBOX (L*W*H) 252*80*117 3 10 30 260*75*145 Axial Lead Transient Voltage Suppressor