SA5.0 LRC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
- Plastic package has Underwriters Laboratory Flammability Classification 94V-O * Glass passivated chip junction in DO-15 package * 500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: typically less than 1.0 ps from 0 volts to BV min * Typical IR less than 1μA above 10V * High temperature soldering guaranteed: 260 /10 seconds/.375”,(9.5mm) lead length/5lbs., (2.3kg) tension Case: JEDEC DO-15 molded plasticWe declare that the material of product compliance Terminals: Axial leads, solderable perwith ROHS requirements MIL-STD-202, Method 208 Polarity: Color band denoted cathode except Bipolar Mounting Position: Any Weight: 0.015 ounce, 0.4 gram DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types SA5.0A thru types SA170A Electrical characteristics apply in both directions.marking code is all type. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. 1.Maximum & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLVALUEUNITS PPPM Minimum 500Watts PM(AV) 3.0Watts IFSM 70Amps TJ -55 to +150 °C TSTG -55 to +175 °C NOTES: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2. 2. Mounted on Copper Leaf area of 1.57in2(40mm2). 3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum. Peak Power Dissipation at TA=25°C, TP=1ms(Note 1) Steady State Power Dissipation at TL=75°C Lead Lengths .375”,(9.5mm) (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine- Wave Superimposed on Rated Load(JECED Method) (Note 3) Operating Temperature Range Storage Temperature Range SA*** GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE - 5.0 TO 170 Volts 500Watt Peak Power 3.0 Watt Steady State RATING Mechanical Data Electrical Characteristic
UNI-REVERSEBREAKDOWNBREAKDOWNTESTMAXIMUMMAXIMUMREVERSE DIRECTIONALSTAND-OFFVOLTAGEVOLTAGECURRENTCLAMPINGPEAK PULSELEAKAGE PARTVOLTAGEVBR (V)VBR (V)ITVOLTAGECURRENT@VRWM NUMBERVRWM (V)MIN. @ITMAX. @IT(mA)@IPP VC (V)IPPM (Amps)IR (uA) SA10 10 11.113.6 1 18.826.61 SA10A 10 11.112.311729.41 SA11 11 12.214.9120.124.91 SA11A 11 12.213.5 1 18.227.41 SA12 12 13.316.312222.71 SA12A 12 13.314.7 1 19.925.11 SA13 13 14.417.6123.8211 SA13A 13 14.415.9121.523.21 SA14 14 15.619.1 1 25.819.41 SA14A 14 15.617.2123.221.51 SA15 15 16.720.4 1 26.918.81 SA15A 15 16.718.5124.420.61 SA16 16 17.821.8128.817.61 SA16A 16 17.819.7 1 2617.61 SA17 17 18.923.1130.516.41 SA17A 17 18.920.9 1 27.616.11 SA18 18 20.024.4132.215.51 SA18A 18 20.022.1129.217.21 SA20 20 22.227.1 1 35.813.91 SA20A 20 22.224.5132.415.41 SA22 22 24.429.8 1 39.412.71 SA22A 22 24.426.9135.514.11 SA24 24 26.732.614311.61 SA24A 24 26.729.5 1 38.912.81 SA26 26 28.935.3146.610.71 SA26A 26 28.931.9 1 42.111.91 SA28 28 31.138.01509.91 SA28A 28 31.134.4145.4111 SA30 30 33.340.7 1 53.59.31 SA30A 30 33.336.8148.410.31 SA33 33 36.744.9 1 598.51 SA33A 33 36.740.6153.39.41 SA***
UNI-REVERSEBREAKDOWNBREAKDOWNTESTMAXIMUMMAXIMUMREVERSE DIRECTIONALSTAND-OFFVOLTAGEVOLTAGECURRENTCLAMPINGPEAK PULSELEAKAGE PARTVOLTAGEVBR (V)VBR (V)ITVOLTAGECURRENT@VRWM NUMBERVRWM (V)MIN. @ITMAX. @IT(mA)@IPP VC (V)IPPM (Amps)IR (uA) SA36 36 40.048.9164.37.81 SA36A 36 40.044.2 1 58.18.51 SA40 40 44.454.3171.47.01 SA40A 40 44.449.1 1 64.57.81 SA43 43 47.858.4176.76.51 SA43A 43 47.852.8169.47.21 SA45 45 50.061.1 1 80.36.21 SA45A 45 50.055.3172.76.91 SA48 48 53.365.1 1 85.55.81 SA48A 48 53.358.9177.46.51 SA51 51 56.769.3191.15.51 SA51A 51 56.762.7 1 82.46.11 SA54 54 60.073.3196.35.21 SA54A 54 60.066.3 1 87.15.71 SA58 58 64.478.711034.91 SA58A 58 64.471.2193.65.31 SA60 60 66.781.5 1 1074.71 SA60A 60 66.773.7196.85.21 SA64 64 71.186.9 1 1144.41 SA64A 64 71.178.611034.91 SA70 70 77.895.111254.01 SA70A 70 77.886.0 1 1134.41 SA75 75 83.3102.011343.71 SA75A 75 83.392.1 1 1214.11 SA78 78 86.7106.011393.61 SA78A 78 86.795.811264.01 SA85 85 94.4115.0 1 1513.31 SA85A 85 94.4104.011373.61 SA90 90 100122 1 1603.11 SA90A 90 10011111463.41 SA100 100 11113611792.81 SA100A 100 111123 1 1622.81 SA110 110 12214911962.61 SA110A 110 122135 1 1772.81 SA120 120 13316312142.31 SA120A 120 13314711932.01 SA130 130 144176 1 2312.21 SA130A 130 14415912092.41 SA150 150 167204 1 2681.91 SA150A 150 16718512432.11 SA160 160 17821812871.71 SA160A 160 178197 1 2591.91 SA170 170 18923113041.61 SA170A 170 189209 1 2751.81 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is ±10% SA***
2.Ratings and Characteristic Curves ( TA = 25°C unless otherwise noted ) SA**** Fig. 1-Peak Pulse Power Rating CurveFig. 2-Pulse Derating Curve Fig. 3-Pulse Waveform Fig. 4-Typical Junction Capacitance Unidirectional Fig. 5-Steady State Power Derating Curve Fig. 6-Maximum Non-Repetitive Peak Forward Surge Current Uniderictional PPPM, Peak Pulse Power,KW Peak Pulse Power(PPP) or current(IPP) Derating in percentage % IPPM, Peak Pulse Current % Cj, Capacitance,pF Pm(AV) Steady State Power Dissipation,Watts IFSM, Forward Surge Current,Amperes 100 1.0 0.1 0.1 1.0 10 100 1000 10000 td,Pulse Width,μsec TA,Ambient Temperature,°C 0 25 50 100 125 150 175 200 100 150 t,Time,ms 0 1.0 2.0 3.0 10000 1000 100 1.0 10 100 1000 V(WM),Reverse Stand-off Voltage,Voltage 3.00 1.50 0.00 TL,Lead Temperature,°C 0 25 50 75 100 125 150 175 100 1 10 100 Number of Cycles At 60 Hz 125 100 Non-Repetive Pulse Waveform Shown in Fig.3 TA=25°C tf=10μs Peak Value Ippm Half Value Ipp/2=td TA=25℃ Test Waveform tf=10μs td=1000μs TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p meansured at stand-off voltage VWM meansured at Zero Bias 0.375"(9.5mm) 20mm*20mm*1mm TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 10/1000μs Waveform as deffused by R.E.A
- dimension: SA****
标题: 1.1. 弹带盒规格 ammo spec. 单位：mm LWH T52 262±276± 290± 2 T42 262±264± 290± 2 T26250 ±345± 395± 3 1.2 弹带内盒要求 inner box spec. 文件编号： WI-250 塑封生产线轴向产品包装规范 第 4 版 第 0 次修改 1 弹带盒装 ammo and box 第 1 页 LRC标签 labelROHS标签 label
标题: 1.4 标签要求 label spec.
1.4.1 LRC标签 LRC label
成型规格forming spec. 1.4.2环保标签 environmental protection label 2.外箱规格 cartoon spec. 单位：mm LWH T52 430±2280± 2225± 2 T42 410±2285± 2300± 2 T26 435±3280± 3295± 3 3 按以上包装方式，编带数量和外包装箱产品数量：typing and cartoon spec. R-3DO-15 1.8K 2K(T52) 1.8K(T26) 18K 20K 36K 36K 32.4K36K外箱数量（T42编带） quantity/cartoon 54K- 外箱数量（T26编带） quantity/cartoon 60K- 每根编带数量 quantity/ammo 3K0.8K 外箱数量（T52编带） quantity/cartoon 30K8.0K 文件编号： WI-250 塑封生产线轴向产品包装规范 第 4 版 第 0 次修改 第 2 页 塑封外型 A-405 & DO-41 & R-1DO-201AD L W H 外箱标签cartoon label LRC产品型号 type ** ** 产品重复峰压值 peak repetive voltage 产品额定电流值 average output current 产品数量 quantity
标题: 4 编带规格 brede spec 26/tape35/tape40/tape42/tape52/tape52/tape# 注: 52编带# 为DO-201AD编带规格 "52编带#" just for D0-201AD 1. 红白编带厚度为0.05mm；两种胶带各自之间无明显色差；编带要求均为胶带。 The typing thickness is 0.05mm and color is obvious difference 2. 两端引带20~40cm. Typing lead over 20~40cm 3. 红色编带一端为二极管“负极”；白色编带一端为二极管“正极”。 red color is cathode ,white color is anode 4. 无卤 green epoxy compound（无卤产品才贴HF only） 尺寸代号 编带尺寸 typing dimension 第 3 页 文件编号： WI-250 塑封生产线轴向产品包装规范 第 4 版 第 0 次修改 Green
- Update Record 版次更新作者更新日期 1 周杰 2010-4-11 2 周杰 2010-9-23 3 周杰 2010-9-24 4 周杰 2012-5-9 5 周杰 2012-8-15修正结电容曲线 1.增加包装规范；2.调整厂标； 更新记录 具体说明产品印字为产品名称。 调整储存温度为175度 SA**** 第一版