DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
www.roithner-laser.com 1 S6530MG v 2.0 24.03.2015
Description
S6530MG is a multimode Laser Diode emitting at typical 660 nm with rated output power of 30 mW CW at room temperature. The 5.6 mm TO package includes a cap and flat window, and contains a built-in monitor PD. Maximum Ratings (TCASE=25°C) Parameter Symbol Values Min. Max. Unit Optical Output Power PO 32 mW Reverse Voltage, LD VR 2.0 V Reverse Voltage, PD VRPD 30 V Operating Temperature TCASE - 10 + 50 °C Storage Temperature TSTG - 15 + 85 °C Lead Solder Temperature *2 TSLD + 280 °C *1 must be completed within 5 seconds Electro-Optical Characteristics (TCASE=25°C) Parameter Symbol Values Min. Typ. Max. Unit Peak Wavelength λP 650 660 665 nm Optical Output Power PO 30 mW Laser Beam Mode Multimode Threshold Current ITH 58 68 mA Forward Current IOP 95 105 mA Forward Voltage VOP 2.1 2.6 V Slope Efficiency η 0.5 0.8 mW/mA Beam Divergence, Parallel ӨII 7 8 13 ° Beam Divergence, Perpendicular Ө┴ 28 35 ° Monitor Current IM 0.15 0.25 mA
www.roithner-laser.com 2 Typical Performance Curves Optical Output Power vs Forward Current Forward Voltage vs. forward Current Peak Wavelength vs. Case Temperature
www.roithner-laser.com 3 Far-Field Pattern Slope Efficiency vs. Case Temperature Threshold Current vs. Case Temperature
www.roithner-laser.com 4 Outline Dimensions All Dimensions in mm Electrical Connection S6530MG 5.6 mm, flat window n-type Lead Description PIN 1 PD Anode PIN 2 LD Cathode PIN 3 LD Anode, PD Cathode, Case
www.roithner-laser.com 5 Precautions ESD Caution: Always do handle laser diodes with extreme caution to prevent electrostatic discharge, the primary cause of unexpected diode failure. ESD failures can be prevented by always wearing wrist straps, only using a grounding workplace, and following strict anti -static guidelines when handling the laser diode. Safety Advice: This laser diode emits highly concentrated infrared light which can be hazardous to the human eye and skin. This diode is classified as CLASS 3 laser product according to IEC 60825-1 and 21 CFR Part 1040.10 Safety Standards. Operating Considerations: Operating the laser diode outside of its maximum ratings may cause failure or a safety hazard. The diode may be damaged by excessive drive currents or switching transients. If the diode is operated using a power supply, it is strongly recommended to connect th e diode with the output voltage set to zero. The voltage should then be increased slowly and with great caution, while at the same time carefully monitoring the laser diodes output power and drive current. The laser diode will show accelerated degradation with increased temperature, and it is advised to keep the case temperature low therefor, by means of heat sinking the device. © All Rights Reserved The above specifications are for reference purpose only and subjected to change without prior notice