AC5102 SIEMENS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
25.06.2012 Siemens AB
Advanced Central Controller AC5102
Features
Security Products 25.06.2012 Central controller for SiPass in tegrated access control systems Support for 500,000 cardholders Support for up to 96 doors Fully supported in SiPass integr ated MP2.6 or higher, backwards compatible with MP2.4 and MP2.5 Up to six field level network ( FLN) channels (RS485) for local device connection Up to 16 local devices can be connected to each FLN. See FLN Device Load Limitations [➙ 6] Building level network (BLN) port for communication with the h ost system via Ethernet FLN1-3 can also be changed to RS232 communication port for Mod em or Elevator Integration. The AC5102 also has a USB diagnostic port that provides a direct connection to its micro-processor to facilitate the download of operating instructions (firmware). Firmware updates can be made without having to visit the controller cabinets. Communication to the host system occurs via a 10/100Mb Ethernet connection. This allows communications over any WAN or LAN where devices on the network can be as-signed a unique IP address. This type of communication ensures the fastest possible transaction times between the host system and AC5102 field panels. The AC5102 hosts a tamper input that can be used to detect if the cabinet in which it has been mounted has been opened. It also provides an alarm output that can operate a visual or audio alarm when security has been breached.
Security Products 25.06.2012 Technical Specifications Additional components ACK5110 cable for modem connection Communication interfaces 6 x Field level network (FLN): – FLN 1: RS232 (modem port) or RS422 / RS485 – FLN 2 & 3: RS 232 / RS422 / RS485 – FLN 4,5,6: RS485 only (expansion module) 1 x RS232 RJ12 (RxD, TxD, GND) 2 x LAN: RJ45 (10/100 MB Ethernet) 1 x USB-A 1 x USB-B Operating voltage 12-30 VDC Power consumption Max. 10 W (fully loaded) Alarm inputs 1 x Tamper input, 1 x Power fail input Alarm output 1 x Alarm output (optical relay, max. 12 V, 100 mA) Door capacity 96 Card capacity 500,000 Indicators Power, Active, Error, COM, USB, SD-Card, 4 x Ethernet LCD Display None Keypad None Tamper switch Yes (Internal) RTC battery 3.0 V, type CR2032 Microprocessor AT91SAM9G20 RISC Processor Based on ARM v5TEJ Architecture Main memory 128 MB Flash memory 256 MB; Firmware is field-updatable Operating temperature 0 to +50 °C Environment Indoor use only Housing Steel Colour Grey and blue Storage temperature -30 to +65 °C (-22 to 149 °F) Humidity 5 – 93% (non condensing) Dimensions (W x H x D) 124 x 220 x 54 mm Approval CE, UL294, C-Tick, FCC
Security Products 25.06.2012 Dimensions Note that the unit is recommended to be mounted in upright position to achieve the best ventilation.
Security Products 25.06.2012 Interfaces The following table provides a brief description of each port. Port Name Brief Description FLN 1 Local RS485/RS422 communica tions for connection of up to 16 local devices. NOTE: FLN1 and RJ45 RS232 ports are shared. Only one port can be connected at any given time. FLN 2-3 Local RS485/RS422/RS232 communications for connection o f up to 16 local devices FLN 4-6 Local RS485 communications for connection of up to 16 local devices RS232 Modem port: RJ-45 (RS232) p ort for dialup communications with the host system USB-B USB port to connect to a PC fo r initial network configuration and for diagnostic purposes USB-A USB port for connection o f USB devices, like a flash key LAN 1-2 Ethernet ports for communication with the host system v ia LAN Power Connection for a 12-30 V DC power source. Power fail Input for the connection of a power fail signal used to monitor the status of the external power supply Tamper Input for the connection of a tamper switch, used to monitor the status of the cabinet door Alarm out Optical relay (max. 12 V, 100 mA) used to connect an alarm output device such as a siren / buzzer / strobe light.
FLN Device Load Limitations Siemens AB A6V10333471 Security Products 25.06.2012 FLN Device Load Limitations Each device produces a certain load on the FLN. The following table outlines the equivalent load value for each FLN device. Device Configuration Units ADS52x0 (SRI) 1 load ADD51x0 (DRI) 2 loads AFI5100 (IPM) 4 loads AFO5100 (OPM) 4 loads (2 when used in one lift control) ADE5300 (ERI) 8 loads AFO5200 (8IO) 2 loads The following table outlines the maximum value of configuration loads that can be connected to each FLN. FLN Channel Maximum Configuration Unit Value FLN 1 16 loads FLN 2 16 loads FLN 3 16 loads FLN 4 16 loads FLN 5 16 loads FLN 6 16 loads Example of a Load calculation: ADE5300 + AFI5100 + 2 x ADD5100 = 16 loads
Security Products 25.06.2012 Details for Ordering Type Part no. Designation Weight AC5102 S54507-C22-A1 Advanced ce ntral controller (ACC) 990 g Accessories, not included in scope of delivery! ACK5110 6FL7820-8FB11 SiPass integrated modem cable 200 g
Infrastructure & Cities Sector Security Products International Headquarters Englundavägen 7 SE-171 24 Solna Tel. +46 8 629 0300 www.siemens.com/securityproducts © 2012 Copyright Siemens AB Technical specifications and availability subject to change without notice. Document ID A6V10333471 Rev 2.0 Edition 25.06.2012