S1SD-1AI-1C.H PF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

SMART Transmitter Power Supply S1SD-1AI-1C.H < 1-channel signal conditioner < 24 V DC supply < Input 2-wire and 3-wire SMART transmitters and current sources < Output 0/4 mA ... 20 mA < Accuracy 0.1 % < Connection via screw terminals Function This signal conditioner provides the galvanic isolation between field circuits and control circuits. The device supplies 2-wire and 3-wire SMART transmitters, and can also be used with current sources. At the output the signal is available as active 0/4 mA ... 20 mA signal. The device has no internal resistor for HART communication. Digital signals may be superimposed on the input signal and are transferred bi-directionally. The device can be powered via terminals or Power Bus. Connection S1SD-1AI-1C.H 5+ 4+ HART HART mA HART mA

24 V DC

Div. 2 Technical Data General specifications Signal type Analog input Operation time MTBF: 339 a acc. to SN 29500 stationary continuous operating, average ambient temperature 40 °C (104 °F) Supply Connection Power Bus or terminals 1-, 2+ Power dissipation 0.9 W Power consumption 1.3 W Input Connection side field side Release date: 2022-01--

10 Date of

Release date: 2022-01-10 Date of issue: 2022-01-10 Filename: 276395_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091

Connection terminals 5+, 6, 7- Input signal 0/4 ... 20 mA Open circuit voltage/short-circuit current ≤ 22 V / 30 mA Input resistance max. 50 Ω Transmission range linearity range: -1 ... 110 % Available voltage 16 V at 20 mA Output Connection side control side Connection terminals 3-, 4+ Analog current output 0/4 ... 20 mA, load ≤ 600 Ω Ripple ≤ 10 mV eff Transfer characteristics Accuracy max. 0.1 % of full-scale value Influence of ambient temperature < 100 ppm/K of full-scale value Rise time/fall time ≤ 3.5 ms Galvanic isolation Output/power supply safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min Input/Other circuits safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min Indicators/settings Labeling space for labeling at the front Directive conformity Electromagnetic compatibility Directive 2014/30/EU EN 61326-1:2013 (industrial locations) Conformity Degree of protection IEC 60529:2001 Protection against electrical shock EN 61010-1:2010 Ambient conditions Damaging gas designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 Mechanical specifications Degree of protection IP20 Connection screw terminals Mass approx. 70 g Dimensions 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1 Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001 Data for application in connection with hazardous areas Certificate DEMKO 16 ATEX 1750X Marking 1 II 3G Ex nA IIC T4 Gc Directive conformity Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-15:2010 International approvals UL approval E106378 IECEx approval IECEx certificate IECEx UL 16.0116X IECEx marking Ex nA IIC T4 Gc General information Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. SMART Transmitter Power Supply S1SD-1AI-1C.H Release date: 2022-01-10 Date of issue: 2022-01-10 Filename: 276395_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091

3S1SD-1AI-1C.H Front view Screw terminals Screw terminals Place for labeling Matching System Components S1SD-2PF Power feed module with screw terminals POWERBUS-SETL5.250 Power bus for 35 mm DIN mounting rail, height: 7.5 mm, length: 250 mm POWERBUS-SETH5.250 Power bus for 35 mm DIN mounting rail, height: 15 mm, length: 250 mm POWERBUS-COV.250 Cover for 35 mm DIN mounting rail, length: 250 mm POWERBUS-CAP End Cap for Power Bus SMART Transmitter Power Supply S1SD-1AI-1C.H Release date: 2022-01-10 Date of issue: 2022-01-10 Filename: 276395_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091

Release date: 2022-01-10 Date of issue: 2022-01-10 Filename: 276395_eng.pdf S1SD-1AI-1C.H Germany: +49 621 776 2222Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091 SMART Transmitter Power Supply The device supports the following SMART protocol:

  • H A R T Application