S19256 AMCC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Complies with XFP MSA Specifications
- 25 mUI pp Jitter Generation
- TX Equalizer to Mitigate Data Dependent Jitter
- Low Power 540 mW
- Dual CDR - 9.95 to 11.32 Gbps operation
- Footprint compatible to the EDC based 10G Dual CDR S19233
- CDR Power Down Option Ideal - 300 mW (with TX EQ and RX EQ)
- LOS Function - Compliant to GR-253
- RSSI Function (8 mV to 800 mV)
- Squelch Control (LOS or LOL conditions)
- Squelch Output Polarity Control
- Polarity Invert Control on Output Buffers
- Lock detect indication
- Automatic Threshold Adjust (Maximizes Sen- sitivity)
- External threshold & Phase Adjust Through I2C Bus®
- Superior Crosstalk Isolation
- Loopback (Optical and Electrical interface)
- AGC embedded equalizer TX and RX
- Integrated equalizer that support over 24” FR- 4 on Transmitter Electrical Side
- TX Output Buffer Slew Rate Control
- Lock detect indication
- -40 to 85°C operation
- CMOS 0.13 Micron Technology
- 1.8 and 3.3 Volt Power Supply
- 6 x 6 m m 2 PBGA package with 0.8 mm pitch
- ESD - 1500 V, 500 V High Speed Inputs
Applications
- 10G Fibre Channel and Ethernet Designs
- 10GbE with FEC
- 10G SONET/SDH/FEC Designs
- SONET/SDH Test Equipment
- SONET/SDH/FEC DWDM Equipment
- XFP MSA Modules (2 km, 10 km, and 40 km) S19256
10 G Ethernet / Fibre Channel / SONET / SDH Dual CDR (2km - 30km)
System Block Diagram with the S19256 OC-192/ 10GE /10FC AMCC S19235/
37 XFP Module XFI
10 Gbps Line Card
6290 Sequence Dr. San Diego, CA 92121 P 858 450 9333 F 858 450 9885 www.amcc.com For technical support, please call 1-800-840-6055 or 858-535-6517, or email support@amcc.com. AMCC reserves the right to make changes to its products, its datasheets, or related documentation, without notice and warrants its products solely pursuant to its terms and conditions of sale, only to substantially comply with the latest available datasheet. Please consult AMCC’s Term and Conditions of Sale for its warranties and other terms, conditions and limitations. AMCC may discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information is current. AMCC does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. AMCC reserves the right to ship devices of higher grade in place of those of lower grade. AMCC SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. AMCC is a registered trademark of Applied Micro Circuits Corporation. PowerPC and the PowerPC logo are registered trademarks of IBM Corporation. All other trademarks are the property of their respective holders. Copyright © 2006 Applied Micro Circuits Corporation. All Rights Reserved. S19256_PB2018_v1.01_20061103 AMCC Suggested Interface Devices Transmitter Side Operations
- 1-bit serial data input
- Equalization to compensate for FR-4
- Threshold and Offset cancellation adjust
- C l o c k a n d D a t a r e c o v e r y
- D a t a r e t i m e
- Serial data output Receiver Side Operations
- Serial input with AGC (Equalization)
- 30 mVpp Differential Sensitivity with threshold adjust
- Loss of signal detection
- C l o c k a n d D a t a r e c o v e r y
- Serial data output Common Operations
- Optical and Electrical Loopbacks
- P o w e r D o w n C D R
- S q u e l c h
- P o l a r i t y I n v e r t S19235 SFI-4 Phase 1 SONET/SDH STS-192/10 Gig Ethernet CMOS Transceiver with ISI Compensation S19237 SFI-4 Phase 1 SONET/SDH STS-192/10 Gig Ethernet CMOS Transceiver with ISI Compensation