S1000-KFDADAPTER

S1000-KFDADAPTER PF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Adapter K-device - S1000 termination board S1000-KFD Adapter < Adapter for mounting a K-device to S1000 termination board < Snap-on < Additional cable sets depending on K-device Function The S1000 system is not maintained any longer. To be able to maintain existing installations the S1000-KFD adapter enables the mounting of an equivalent K-system module. A table with correspondent S1000 and K devices allows the correct selection of the Kdevice. The adapter is an accessory to the Kdevice. It serves the mechanical mounting on the termination board. Warning! The adapter S1000-KFD must only be used with an Ex-certified K module. Every single usage results in improper utilization and therefore endangers the intrinsic safety! Technical Data Supply Rated voltage Ur 20.4 ... 30 V DC Electrical specifications Connection see Datasheet module Conformity Degree of protection IEC 60529 Ambient conditions Mechanical specifications Degree of protection IP20 Connection see Datasheet device Mass approx. 50 g Dimensions 95 x 21 x 30 mm (3.7 x 0.8 x 1.2 inch) Data for application in connection with hazardous areas EU-Type Examination Certificate CESI 04 ATEX 142 X Marking 1 II (1)G [EEx ia] IIC Supply Maximum safe voltage Um 250 V AC / 375 V DC (Attention! Um is no rated voltage.) Directive conformity Directive 2014/34/EU EN 50014, EN 50020 International approvals IECEx approval IECEx certificate IECEx LCI 07.0013X IECEx marking [Ex ia] IIC , [Ex iaD] Standards IEC 60079-0:2004 , IEC 60079-11:2006 , IEC 61241-0:2004 , IEC 61241-11:2005 General information Release date: 2020-09--

23 Date of

Release date: 2020-09-23 Date of issue: 2020-09-23 Filename: 182380_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091

Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. Assembly Adapter K-device - S1000 termination board S1000-KFD Adapter Release date: 2020-09-23 Date of issue: 2020-09-23 Filename: 182380_eng.pdf Germany: +49 621 776 2222 Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091

Release date: 2020-09-23 Date of issue: 2020-09-23 Filename: 182380_eng.pdf S1000-KFD Adapter Germany: +49 621 776 2222Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091 Adapter K-device - S1000 termination board Correspondent tables Devices with analogue inputs Devices with analogue outputs Devices with digital inputs Devices with digital outputs Application S1000 type code alternative KFD2 ty pe code Product code Restrictions 1021/A/0/0242/AA KFD2-STC1-Ex1 AI01 – KFD2-STC3-Ex1 AI02 Honeywell DE protocol not available 1021/A/0/0242/VV KFD2-STV1-Ex1 AI03 – KFD2-STV3-Ex1´ AI04 Honeywell DE protocol not available 1022/A/0/0242/AA KFD2-STC4-Ex2 AI05 Honeywell DE protocol not available 1022/A/0/0242/VV KFD2-STV4-Ex2-1 AI06 Honeywell DE protocol not available 1023/A/0/0242/AA KFD2-CR-Ex1.30200 AI07 – KFD2-STC3-Ex1 AI08 max. V tx 16.5 V 1023/A/0/0242/VV KFD2-STV3-Ex1 AI09 max. V tx 16.5 V 1025/A/0/0242/AA KFD2-STC3-Ex1 AI10 – KFD2-STC4-Ex1 AI19 – 1025/A/0/0242/VV KFD2-STV3-Ex1-1 AI11 – KFD2-STV4-Ex1-1 AI20 – 1026/A/0/0242/AA KFD2-STC4-Ex2 AI12 – 1026/A/0/0242/VV KFD2-STV4-Ex2-1 AI13 – 1029/A/0/0242/SA KFD2-STC4-Ex1-Y112669 AI14 – 1029/A/0/0242/AA KFD2-STC3-Ex1 AI15 – KFD2-STC4-Ex1 AI21 – 1029/A/0/0242/VV KFD2-STV3-Ex1-1 AI16 – KFD2-STV4-Ex1-1 AI22 – 1030/A/0/0242/AA KFD2-STC4-Ex2 AI17 – 1030/A/0/0242/VV KFD2-STV4-Ex2-1 AI18 – S1000 type code alternative KFD2 ty pe code Product code Restrictions 1031/H/0/0242/AA KFD2-CD-Ex1.32.0 AO01 – 1031/H/0/0202/DD – 1031/H/0/0242/DD KFD2-CD-Ex1.32.1 AO02 – 1031/H/0/0202/AA KFD2-CD-Ex1.32.2 AO03 – 1031/V/0/0315/AA KFD2-CD-Ex1.32.3 AO04 – 1032/H/0/0242/AA KFD2-CD2-Ex2 AO05 – KFD2-SCD2-Ex2.LK minimum load 100  , line fault detection active 1033/H/0/0242/AA KFD0-CS-Ex1.50P AO06 – 1034/H/0/0242/AA KFD0-CS-Ex2.50P AO07 – 1035/H/0/0250/FD KFD0-CS-Ex1.51P AO08 – 1036/H/0/0250/FD KFD0-CS-Ex2.51P AO09 – 1037/A/0/0242/AA KFD2-SCD-Ex1.LK AO10 – 1038/A/0/0242/AA KFD2-SCD2-Ex2.LK AO11 – 1039H/0/0204/FD KFD0-CS-Ex1.51P AO12 – 1039H/0/0242/FD – 1040H/0/0204/FD KFD0-CS-Ex2.51P AO13 – 1040H/0/0242/FD – S1000 type code alternative KFD2 ty pe code Product code Restrictions 1821/x/0/xxxx/BB KFD2-SR2-Ex1.W.LB DI01 to be used only for SELV signal 1821/x/0/xxxx/CC DI02 to be used for NON-SELV signal (mains voltage) 1822/x/0/xxxx/BB KFD2-SR2-Ex2.W DI03 to be used only for SELV signal, inputs not insulated 1822/x/0/xxxx/CC DI04 to be used for NON-SELV signal (mains voltage), inputs not insulated 1841/x/0/xxxx/LL KFD2-SOT-Ex1.LB.IO DI05 – 1841/x/0/xxxx/HH DI06 – 1842/x/0/xxxx/LL KFD2-SOT2-Ex2.IO DI07 – 1842/x/0/xxxx/HH DI08 – S1000 type code alternative KFD2 ty pe code Product code Restrictions

Release date: 2020-09-23 Date of issue: 2020-09-23 Filename: 182380_eng.pdf S1000-KFD Adapter Germany: +49 621 776 2222Pepperl+Fuchs Group Refer to "General Notes Relating to Pepperl+Fuchs Product Information". USA: +1 330 486 0002 Singapore: +65 6779 9091 Adapter K-device - S1000 termination board Devices with low level inputs Devices with trip values 1861/U/0/0070/xx KFD0-RO-Ex2 DO01 U m max. 40 V 1862/U/0/0070/xx 1871/L/0/0060/UU KFD2-SL-Ex1.48.90A DO03 – 1871/L/0/0050/WW – 1871/U/0/0070/UU KFD2-SD Ex1.48.90A DO04 – 1871/U/0/0070/UU – 1872/L/0/0050/WW KFD2-SL2-Ex2 DO05 – 1872/L/0/0060/UU – 1881/U/0/0070/UU KFD2-SD-Ex1.36 DO06 – 1872/C/0/0040/UU KFD2-SL2-Ex2 DO07 – 1872/C/0/0030/WW – S1000 type code alternative KFD2 ty pe code Product code Restrictions 1011/H/0/0202/AA KFD2-CR-Ex1.20300 LI01 On 1061 output is NON linearized. On UT output is linearized. 1011/H/0/0242/AA KFD2-STC4-Ex1 LI12 – 1011/H/0/0202/VV KFD2-STV4-Ex1-1 LI13 – 1011/H/0/0242/VV – 1061/x/x/xxxx/AA KFD2-UT-Ex1 LI02 On 1061 output is NON linearized. On UT output is linearized. 1061/x/x/xxxx/VV KFD2-UT-Ex1-1 LI03 – 1071/x/x/xxxx/AA KFD2-UT-Ex1 LI04 – 1071/x/x/xxxx/VV KFD2-UT-Ex1-1 LI05 – 1065/M/1/0880/MV KFD2-VR-Ex1.50m LI06 Check for the proper input range. KFD2-VR-Ex1.500m LI07 – 1065/M/2/0880/MV KFD2-VR-Ex1.50m.L LI08 – 1065/M/3/0880/MV KFD2-VR-Ex1.50m.R LI09 – 1062/x/x/xxxx/xx KFD2-UT2-Ex2 LI10 On 1062 output is NON linearized. On UT2 output is linearized. 1072/D/x/xxxx/xx KFD2-UT2-Ex2 LI11 – 1072/F/x/xxxx/xx – S1000 type code alternative KFD2 ty pe code Product code Restrictions 1310/H/x/xxxx/xx KFD2-GU-Ex1 TA01 U m max. 40 V, to be used for NON-SELV signal (mains voltage) 1311/H/x/xxxx/xx TA02 U m max. 40 V, to be used for SELV signal 1310/V/x/xxxx/xx KFD2-GU-Ex1 TA03 U m max. 40 V, to be used for NON-SELV signal (mains voltage) 1311/V/x/xxxx/xx TA04 U m max. 40 V, to be used for SELV signal 1360/x/x/xxxx/xx KFD2-GU-Ex1 TA05 U m max. 40 V, to be used for NON-SELV signal (mains voltage) 1361/x/x/xxxx/xx TA06 U m max. 40 V, to be used for SELV signal 1370/x/x/xxxx/xx KFD2-GU-Ex1 TA07 U m max. 40 V, to be used for NON-SELV signal (mains voltage) 1371/x/x/xxxx/xx TA08 U m max. 40 V, to be used for SELV signal