RTP21025-10 RFHIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
GGaaNN--SSiiCC PPaalllleett AAmmpplliiffiieerr RRTTPP2211002255--1100 ▪ Tel : 82-31-250-5078 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 0.6 Product Features Application
- Doherty amplifier design
- GaN on SiC HEMT
- Small and light weight
- 50 Ohm Input/Output impedance matched
- Highly reliable and rugged design
- High efficiency, High Gain
- 25W typical P AV G
- WCDMA & LTE DPD amplifier
- General purpose RF amplifier
Description
The RTP21025-10 is designed for RF system application frequencies from 2110MHz to 2170MHz, with high gain. This Pallet Amplifier uses GaN on SiC HEMT technology which performs high breakdown voltage, high linearity, high efficiency. The RTP21025-10 is DPD application amplifier. Electrical Specifications @ VDD=+28VDC, T=25 °C, 50Ω System PARAMETER Symbol Min Typ Max Unit Frequency Range BW 2110 - 2170 MHz Output Power PAV G - 44 dBm Output Power @ Psat G .C.P Psat - 51.5 - dBm Small Signal Gain SSG 55 60 - dB Small Signal Gain Flatness ΔG - ± 1.0 ± 2 dB Gain Variation ΔGt ± 3.0 dB ACLR @ WCDMA 20MHz 4FA ACLR -23 -25 dBc ACLR with DPD ACLR -53 dBc Forward Coupling FC -32 -31 -30 dB Operating Voltage VDC 28 - V olt Efficiency @ Pout 25Watt(PAR 7.5dB) E - 38 - % ※ Test Signal Condition : WCDMA 20MHz 4FA (PAR 7.5dB), Test DPD solution : Optichron DPD Environmental Characteristics PARAMETER Symbol Min Typ Max Unit Operating Temperature Tc -30 - +60 °C Storage Temperature Ts -40 - +90 °C Mechanical Specifications PARAMETER Value Units Limits Dimensions ( L x W x H ) 150 x 90 x 18.5 mm Max Weight 300 g Typical RF Connectors In/Out SMA Female RF Connector Coupling MCX Female DC Connectors / Controls 5569-08(8pin), 5267-03A(3pin) Cooling External Heat sink + airflow
GGaaNN--SSiiCC PPaalllleett AAmmpplliiffiieerr RRTTPP2211002255--1100 ▪ Tel : 82-31-250-5078 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 0.6 RF Interface Connectors Pin # DESCRIPTION Specifications
1 RF IN RF Input signal
2 RF OUT RF Output signal
3 RF FWD Port RF Forward Detection signal For Feed-back
- 5569-08 (4.2mm PITCH, 8Pin) Pin # DESCRIPTION Specifications 1,2,3 Drive, Main Amp +Vdd +28Vdc 4 Gain Block Amp +Vgg +5.6V 5,6,7,8 GND Ground - 5267-03A (2.5mm PITCH, 3Pin) Pin # DESCRIPTION Specifications
1 GND Ground
2 Enable Low Enable
3 Temp. Monitor Reporting Temperature data [0.75V/25℃(10mV/℃)] ※ RF connector and DC connector custom design available.
GGaaNN--SSiiCC PPaalllleett AAmmpplliiffiieerr RRTTPP2211002255--1100 ▪ Tel : 82-31-250-5078 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 0.6 Outline Drawing
GGaaNN--SSiiCC PPaalllleett AAmmpplliiffiieerr RRTTPP2211002255--1100 ▪ Tel : 82-31-250-5078 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 0.6 Typical Output Spectrum @ WCDMA 20MHz 4FA (PAR 7.5dB) : Pout =25W(44dBm) - W i t h o u t D P D - - W i t h D P D - Frequency 2.12GHz Frequency 2.14GHz Frequency 2.16GHz
GGaaNN--SSiiCC PPaalllleett AAmmpplliiffiieerr RRTTPP2211002255--1100 ▪ Tel : 82-31-250-5078 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 0.6 Network Analyzer RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time w ithout notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, inclu ding without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase or ders. RFHIC products are not intended for use in life support equipment or application where ma lfunction of the product can be expected to result in persona l injury or death. Buyer uses or sells such products for any such unintended or unauthorized applicatio n, buyer shall indemnify, protect and hold RFHIC and its direct ors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC.