RTOP003A1 SENSORTECHNICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
www.sensortechnics.com Stainless steel pressure sensors
FEATURES
- Absolute and gage pressures
- Calibrated and temperature compensated
- Rugged stainless steel isolated package
- Sensortechnics PRO services SPECIFICATIONS Maximum ratings Supply voltage +15 VDC Temperature ranges: Compensated 0 to +82°C Operating -40 to +125°C Storage -40 to +125°C Vibration: 10 g at 20 to 2000 Hz Shock: 100 g for 11 msec. Life: 1 million cycles minimum Insulation resistance (min.): 100 MΩ at 50 VDC ELECTRICAL CONNECTION -out +out Vs- Vs+
www.sensortechnics.com Stainless steel pressure sensors PRESSURE SENSOR CHARACTERISTICS rebmuntraPe gnarerusserPe russerpfoorP 6 erusserptsruB 7
www.sensortechnics.com Stainless steel pressure sensors Specification notes: Span is the algebraic difference between the output voltage at full scale pressure and the output at zero pressure. Full scale span is ratiometric to the supply voltage. Linearity is based on B est fit Straight Line from the zero to the full scale pressure. Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure. Maximum error band of the offset voltage or span over the compensated temperature range, relative to the 25°C reading. Long term stability over a six month period. Response time for a step change from the zero pressure to the full scale pressure . The maximum pressure that can be applied without changing the transducer´s performance or accuracy. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer case. Common mode voltage as measured from output to ground. Absolute devices with improved zero pressure offset values are available on request. Please contact your nearest Sensortechnics sales office for further information. PERFORMANCE CHARACTERISTICS (VS = 10 VDC ± 0.01 VDC , tamb = 25°C) scitsiretcarahC. niM. pyT .xaM stinU tesffoerusserporeZi sp01otpusecivedlla5 .1-05 .1+ Vm srehtolla0 .1-0 0 .1- napselacslluF 1 secivedisp5dnaisp38 40 52 5 srehtolla8 90 012 01 ytiraenil-noN 2 1.0±5 2.0± OSF% siseretsyherusserP 2 510.0±0 30.0± stceffelamrehT 3 secivedisp5dnaisp3t esffO0 .2± )C°28ot0(n apS0 .2± srehtollat esffO5 .0±0 .1± napS5 .0±0 .1± )C°28ot0(siseretsyhlamrehT 1.0±3 .0± ytilibataepeR 010.0±0 30.0± napsdnatesffofoytilibatsmretgnoL 4 1.0±3 .0± )%09ot01(emitesnopseR 1.0s m ecnadepmitupnI0 .85 20 5 kΩ ecnadepmituptuO0 .35 .40 .6 egatlovedomnommoC 8 5.03 .10 .2V
www.sensortechnics.com Stainless steel pressure sensors RTO...2 (flush mount package) mass: 18 g dimensions in inches (mm) Ø .668 (16.98) CKT CAVITY 4 x .125 (3.2) GROOVE FOR AS568-016 O-RING (15.6 x 1.78) Ø .650 (16.51) O-RING GROOVE Ø .736 (18.69) WELD RELIEFØ .746 (18.95)
2.0 NOMEX INSULATED
W/ .100 (2.54) PIN SPACING (24 AWG EQUIV.) .375 (9.55) .220 (5.59) .125 (3.18) .040 (1.02) mass: 20 g dimensions in inches (mm) Ø .668 (16.98) CKT CAVITY 4 x .125 (3.2) Ø .746 (18.95) W/ .100 (2.54) PIN SPACING (24 AWG EQUIV.) GROOVE FOR AS568-016 O-RING (15.6 x 1.78) Ø .650 (16.51) O-RING GROOVE Ø .736 (18.69) WELD RELIEF Ø .594 (15.09) RING I.D. .575 (14.61) .420 (10.67) .325 (8.26) Note: Non-concentricity effects at the diaphragm weld area may cause run out of up to ±0.006“ between the upper and lower portions of the sensor body (it is recommended to use a counter bore in the mating bore used with this device to allow for this non-concentricity). PHYSICAL DIMENSIONS RTO...1 (cell package) third angle projection third angle projection Do not touch the diaphragm! Do not touch the diaphragm!
www.sensortechnics.com Stainless steel pressure sensors Ø .668 (16.98) CKT CAVITY 4 x .125 (3.2) Ø .746 (18.95) W/ .100 (2.54) PIN SPACING (24 AWG EQUIV.) .75 (19) HEX Ø .171 (4.34) Ø .438 (11.13) Ø .720 (18.89) 1.24 (31.50) .722 (18.34) .472 (12.0) .412 (10.46) .34 (8.64) RTO...7 (1/4 BSP package) mass: 52 g dimensions in inches (mm) PHYSICAL DIMENSIONS (cont.) third angle projection
www.sensortechnics.com Stainless steel pressure sensors
ORDERING INFORMATION
seireS egnarerusserP edomerusserP elytsgnisuoH snoitpOO TR 300P isp3...0 *A etulosbA 1 lleC 500P isp5...0 G egaG 2 tnuomhsulF 010P isp01...0 **V egag/muucaV 7 PSB4/1 510P isp51...0 030P isp03...0 050P isp05...0 001P isp001...0 002P isp002...0 003P isp003...0 005P isp005...0 ylnosdrawpuisp51morf* ylnoisp001dna03,51rof** :elpmaxE OTR 510P A 2 Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. Note: Current supply versions are available on request. Please contact your nearest Sensortechnics sales office for further information. Sensortechnics PRO services:
- Extended guarantee period of 2 years
- Improved performance characteristics
- Custom product modifications and adaptations even for small quantities
- Advanced logistics models for supply inventory and short delivery times
- Technical support through application engineers on the phone or at your site
- Fastest possible technical response for design and QA engineers ... plus other services on request