RTD14012 SIEMENS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Miniature Printed Circuit Board Relays, Sockets and Accessories RT series s

RT series (DC Coil)

16 Amp PC Board

Meets VDE 10mm Spacing, 5KV Dielectric File E22575 File LR15734 NR 6106

Features

  • SPST through DPDT contact arrangements.
  • Immersion cleanable and flux tight versions available.
  • VDE 10mm spacing, 5kV dielectric, coil to contacts.
  • UL Class F coil insulation system.
  • Conforms to UL 508, 1873, 353 and 1950.
  • Low profile; 15.7mm height.
  • Sensitive coil; 400mW.
  • Withstand surge voltage of 10,000V. Contact Data Arrangements: 1 Form A (SPST-NO) Wiring Diagram Code 1, 3. 2 Form A (DPST-NO) Wiring Diagram Code 5. 1 Form C (SPDT) Wiring Diagram Code 1, 3. 2 Form C (DPDT) Wiring Diagram Code 5. Material: Silver-nickel 90/10. Minimum Load: 12V/100mA. Expected Mechanical Life: 10 million operations. Initial Contact Resistance: 100 milliohms max @ 1A 12VDC. Designed to meet UL/CSA/VDE ratings with relay proper- ly vented. Remove vent nib after soldering and cleaning. UL/CSA/VDE Ratings @ 25° C Initial Dielectric Strength Between Open Contacts: >1,000VAC (1 minute). Between Poles (code 5): >2,500VAC (1 minute). Between Coil and Contacts: >5,000VAC (1 minute). Surge Voltage (DC): >10,000VAC x (1.2 x 50 µsec). Coil Data @ 25° C Voltage: 5 to 48VDC. Nominal Power @ 25° C: 400mW. Duty Cycle: Continuous. Initial Insulation Resistance: 10,000 megohms, min., at 25° C, 500VDC and 50% rel. humidity. Operate Data @ 25° C Must Operate Voltage(DC): 70% of nominal. Must Release Voltage(DC): 10% of nominal. Operate Time (Excluding Bounce): 7 ms, typ., 15ms max. at nom. voltage. Release Time (Excluding Bounce): 3 ms, typ., 6ms max. at nom. voltage. Environmental Data Temperature Range: Storage: -40° C to +105° C. Operating: -40° C to +85° C at rated current. Vibration, Operational with no contact opening >10µs Mechanical Data Termination: Printed circuit terminals. Enclosures: RT 1, 3, 4: Flux-tight, top vented, plastic case. RT B, D, E: Immersion cleanable, plastic case. Weight: 0.35 oz. (10g) approximately. DC Must Nominal Nominal Resistance Operate Coil Voltage in Ohms Voltage Current VAC ±10% VAC (mA) – 50/60Hz. 005 62 3.5 80 006 90 4.2 66.7 009 202 6.3 44.4 012 360 8.4 33.3 018 810 12.6 22.2 024 1,440 16.8 16.7 048 5,760 33.6 8.3 Coil Data @ 25° C Max. Ambient Temp. vs. Coil Voltage 100 140 180 220 260 300 0 20 40 60 80 100 0 A A B Max. Allowable Ambient Temp. (°C) Applied Coil Voltage (% of rated nom.) 8 A 16A 12A A: Coil temperature = Ambient temperature. B: 110% of nominal coil voltage at rated contact load. * Form A only ** Form B only Code NO/NC Load Type Operations 1 10A/10A @ 277VAC Resistive/GP 100K 10A/10A @ 30VDC Resistive 100K 12A/12A @ 250VAC Resistive/GP 30K 12A/12A @ 30VDC Resistive 30K 3/4 HP @ 480VAC* Motor 6K 1/2 HP @ 240VAC* Motor 6K 1/3 HP @ 120VAC* Motor 6K

48 LRA/10 FLA @ 240VAC* Motor 30K

TV-3 @ 120VAC* Tungsten 25K A300, 720VA @ 240VAC* Pilot Duty 30K 3 16A/16A @ 250VAC Resistive/GP 50K 20A/20A @ 277VAC Resistive/GP 30K 20A/20A @ 24VDC Resistive 30K 16A/16A @ 30VDC Resistive 30K

1 HP @ 480VAC* Motor 6K

1 HP @ 240VAC* Motor 6K

1/2 HP @ 120VAC* Motor 6K

60 LRA/10 FLA @ 250VAC* Motor 30K

TV-5 @ 120VAC* Tungsten 25K A300, 720VA @ 240VAC* Pilot Duty 30K B300, 360VA @ 240VAC** Pilot Duty 30K 5 8A/8A @ 277VAC Resistive/GP 100K 8A/8A @ 30VDC Resistive 100K 10A/10A @ 250VAC Resistive/GP 30K 10A/10A @ 30VDC Resistive 30K 1/2 HP @ 240VAC* Motor 6K 1/4 HP @ 120VAC* Motor 6K

34.8 LRA/6 FLA @ 120VAC* Motor 30K

17.4 LRA/5 FLA @ 240VAC* Motor 30K

B300, 360VA @ 240VAC* Pilot Duty 30K TV-3 @120VAC* Tungsten 25K

Typical Part Number B RT 1 3 4 012 1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 1 = 1 pole 12A, Pinning 3.5mm, flux-tight (Code 1). B = 1 pole 12A, Pinning 3.5mm, sealed (Code 1). 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). D = 1 pole 16A, Pinning 5mm, sealed (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). E = 2 pole 8A, Pinning 5mm, sealed (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPST) (Requires wiring diagram codes 1 or 3.) 2 = 2 Form C (DPST) (Requires wiring diagram code 5.) 3 = 1 Form A (SPST-NO) (Requires wiring diagram codes 1 or 3.) 4 = 2 Form A (DPST-NO) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10 (standard stock). 1 = Silver cadmium Oxide (Special order) 5. Coil Voltage: 005 = 5VDC 009 = 9VDC 018 = 18VDC 048 = 48VDC 006 = 6VDC 012 = 12VDC 024 = 24VDC Stock Items RT114012 RT114024 RT134012 RT134024 RTB14005 RTB14012 RTB14024 RTB34012 RTB34024 RT314012 RT314024 RT334012 RTD14005 RTD14012 RTD14024 RTD34012 RTD34024 RT424012 RT424024 RT444012 RT444024 RTE24005 RTE24012 RTE24024 RTE44012 RTE44024

Ordering Information

Wiring Diagrams (Bottom View) .276 (7.0) .300 (7.62) .300 (7.62) .800 (20.32) .051 DIA. (1.30) .800 (20.32) .400 (10.16) .051 DIA. (1.30) .051 DIA. (1.30) .051 DIA. (1.30) PC Board Layouts (Bottom View) Breaking Capacity 0.1 0.5 0.1 0.5 10 20 50 100 200 300 10 20 50 100 200 300 DC Voltage DC Voltage Contact Current Contact Current A B A B

1 Pole 12A 1 Pole 16A 2 Pole 8A

1 Pole 12A

3.5mm

1 Pole 16A

2 Pole 8A

1 Pole 2 Pole

A: 1 Contact. B: 2 Contacts in series. Contact Life for Resistive AC Load (Typical) 107 Breaking Capacity (kV A) Oper ations 106 105 104 A B C A: 8A Model B: 12A Model C: 16A Model Note: Data from 250VAC @ 70° C. Code 3 & 5 .62 (15.7) .50 (12.7) 1.14 (29) 6X .031 X .020 (.80 X .52) 2X .020 X .020 (.52 X .52) .17 (4.3) A: 16A Version. B: 12A Version. Note: On single throw models, only necessary terminals are present. Note: On single throw models, only necessary terminals are present.

RT series (AC Coil)

16 Amp Miniature

Printed Circuit Board Relay Meets VDE 10mm Spacing, 5KV Dielectric File E38891 File LR14385 NR 6106

  • SPST through DPDT contact arrangements.
  • Immersion cleanable and flux tight versions available.
  • Meets VDE 10mm spacing, 5kV dielectric, coil to contacts.
  • Conforms to UL 508, 1873 and 353. Initial Dielectric Strength Between Open Contacts: >1,000VAC (1 minute). Between Poles (code 5): >2,500VAC (1 minute). Between Coil and Contacts: >5,000VAC (1 minute). Creepage/Clearance, Coil to Contact: 10/10mm. Coil Data @ 20° C Voltage: 24, 115, 230VAC. Nominal Power @ 25° C: .75VA. Duty Cycle: Continuous. Initial Insulation Resistance: 10,000 megohms, min., at 20° C, 500VDC and 50% rel. humidity.. Coil Data Max. Ambient Temp. vs. Coil Voltage 100 140 180 220 260 300 0 20 40 60 80 100 0 A A B Max. Allowable Ambient Temp. (°C) Applied Coil Voltage (% of rated nom.) 8 A 16A 12A Operate Data Must Operate Voltage: See coil data. Operate Time (Excluding Bounce): 8 ms, typ., at nom. voltage. Release Time (Excluding Bounce): 11 ms, typ., at nom. voltage. Environmental Data Temperature Range: Storage: -40° C to +105° C. Operating: -40° C to +70° C at rated current. Vibration: 30 - 150 Hz: at 20g with no contact opening >10µs on the N.O. contact; at 5g with no contact opening >10µs on the N.C. contact. Mechanical Data Termination: Printed circuit terminals. Enclosures: RT 1, 3, 4: Flux-tight, top vented, plastic case. RT B, D, E: Immersion cleanable, plastic case. Weight: 0.42 oz. (12g) approximately. A: Coil temperature = Ambient temperature. B: 110% of nominal coil voltage at rated contact load. Contact Data Arrangements: 1 Form A (SPST-NO) Wiring Diagram Code 1, 3. 2 Form A (DPST-NO) Wiring Diagram Code 5. 1 Form C (SPDT) Wiring Diagram Code 1, 3. 2 Form C (DPDT) Wiring Diagram Code 5. Material: Silver-nickel 90/10. Minimum Load: 12V/100mA. Expected Mechanical Life: 10 million operations. * Form A only Designed to meet UL/CSA/VDE ratings with relay proper- ly vented. Remove vent nib after soldering and cleaning. UL/CSA Ratings @ 25° C: Code NO/NC Load Type Operations 1 12A NO @ 240VAC GP 30K 10A/5A @ 240VAC Resistive/GP 100K 8A @ 28VDC Resistive 30K

1/2 HP @ 120VAC* Motor 6K 8A @ 28VDC* Resistive 30K B300 Pilot Duty 6K 3 16A/8A @ 240VAC GP 6K 8A @ 28VDC Resistive 30K 1/2 HP @ 120VAC* Motor 6K 1HP @ 240VAC* Motor 6K

48 LRA, 8 FLA @ 240VAC Motor 30K

5 8A @ 240VAC Resistive 30K 8A @ 28VDC Resistive/GP 30K 1/2 HP @ 240VAC Motor 6K 1/4 HP @ 120VAC Motor 6K B300 Pilot Duty 6K VDE Ratings @ 25° C: Code NO/NC Load Type Operations 1 12A @ 250VAC Resistive 30K 12A @ 250VAC Resistive 100K 3 16A @ 250VAC Resistive 10K 16A @ 250VAC Resistive 50K 5 8A @ 250VAC Resistive 30K 8A @ 250VAC Resistive 50K DC Must Nominal Nominal Nominal Resistance Operate Drop-out Coil Coil Voltage in Ohms Voltage Voltage Current Current VAC ±10% VAC VAC (mA)–50Hz. (mA)–60Hz. 24 350 18.0 3.6 31.6 24.3 115 8,100 86.3 17.3 6.6 5.1 230 32,500 172.5 34.5 3.3 2.3

Contact Life for Resistive AC Load (Typical) Note:Data from 250VAC @ 70 °C. Typical Part Number B RT D 1 4 524 1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 1 = 1 pole 12A, Pinning 3.5mm, flux-tight (Code 1). B = 1 pole 12A, Pinning 3.5mm, sealed (Code 1). 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). D = 1 pole 16A, Pinning 5mm, sealed (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). E = 2 pole 8A, Pinning 5mm, sealed (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPST) (Requires wiring diagram codes 1 or 3.) 2 = 2 Form C (DPST) (Requires wiring diagram code 5.) 3 = 1 Form A (SPST-NO) (Requires wiring diagram codes 1 or 3.) 4 = 2 Form A (DPST-NO) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10. 5. Coil Voltage: 524 = 24VAC 730 = 230VAC 615 = 115VAC Wiring Diagrams (Bottom View) .276 (7.0) .296 (7.50) .296 (7.50) .788 (20.0) .051 DIA. (1.30) .788 (20.0) .394 (10.0) .051 DIA. (1.30) .051 DIA. (1.30) .051 DIA. (1.30) PC Board Layouts (Bottom View) Breaking Capacity 3.5mm Code 3 & 5 A: 1 Contact. B: 2 Contacts in series. A: 16A Version. B: 12A Version. 0.1 0.5 0.1 0.5 10 20 50 100 200 300 10 20 50 100 200 300 DC Voltage DC Voltage Contact Current Contact Current A B A B 107 Breaking Capacity (kV A) Oper ations 106 105 104 A B C A: 8A Model B: 12A Model C: 16A Model .62 (15.7) .50 (12.7) 1.14 (29) 6X .031 X .020 (.80 X .52) 2X .020 X .020 (.52 X .52) .17 (4.3) Note: On single throw models, only necessary terminals are present. Note: On single throw models, only necessary terminals are present.

Code NO/NC Load Type Operations 3 16A/8A @ 240VAC GP 6K 8A @ 28VDC Resistive 30K 1/2 HP @ 120VAC* Motor 6K 1HP @ 240VAC* Motor 6K 5 8A @ 240VAC Resistive 30K 8A @ 28VDC Resistive/GP 30K 1/2 HP @ 240VAC Motor 6K 1/4 HP @ 120VAC Motor 6K B300 Pilot Duty 6K Contact Data Arrangements: 1 Form C (SPDT) Wiring Diagram Code 3. 2 Form C (DPDT) Wiring Diagram Code 5. Material: Silver-nickel 90/10. Minimum Load: 12V/100mA. Expected Mechanical Life: 5 million operations, 1 pole. 2 million operations, 2 pole. RT series (Latching) Printed Circuit Board Relay Meets VDE 10mm Spacing, 5KV Dielectric File E38891 File LR14385 NR 6106

  • Latching relay with 1 or 2 coils.
  • SPDT (16A) and DPDT (8A) contact arrangements.
  • Flux tight enclosure.
  • Meets VDE 10mm spacing, 5kV dielectric, coil to contacts.
  • Conforms to UL 508, 1873 and 353. * Form A only Initial Dielectric Strength Between Open Contacts: >1,000VAC (1 minute). Between Poles (code 5): >2,500VAC (1 minute). Between Coil and Contacts: >5,000VAC (1 minute). Creepage/Clearance, Coil to Contact: 10/10mm. Coil Data @ 20° C Voltage: 5 to 24VDC*, 1 coil. 3 to 24VDC*, 2 coil. Nominal Power @ 25° C: 400mW, 1 coil. 600mW, 2 coil. Duty Cycle: Continuous. Initial Insulation Resistance: 10,000 megohms, min., at 20° C, 500VDC and 50% rel. humidity. Operate Data @ 20° C Must Operate Voltage: See coil data. Operate Time (Excluding Bounce): 5 ms, typ., at nom. voltage. Release Time (Excluding Bounce): 4 ms, typ., at nom. voltage. Max. Switching Rate: 360 ops. at rated load. Environmental Data Temperature Range: Storage: -40° C to +105° C. Operating: -40° C to +70° C at rated current. Vibration: 30 - 500 Hz: N/C opens at >3g and changes from reset to set at >5g; Shock: N/C opens at >6g and changes from reset to set at >15g.; Mechanical Data Termination: Printed circuit terminals. Enclosures: RT 3, 4: Flux-tight, top vented, plastic case. Weight: 0.46 oz. (13g) approximately. DC Nominal Nominal Resistance Set Reset Coil Voltage in Ohms Voltage Voltage Current VDC ±10% VDC VDC (mA)

2 Coil Data

1 Coil Data

  • Other coil voltages upon request. UL/CSA ratings @ 70° C: Designed to meet UL/CSA/VDE ratings with relay proper- ly vented. Remove vent nib after soldering and cleaning. VDE Ratings @ 70° C: Code NO/NC Load Type Operations 3 16A@ 250VAC Resistive 10K 8A @ 250VAC Resistive 30K 5 8A @ 250VAC Resistive 30K 8A @ 250VAC Resistive 100K DC Nominal Nominal Resistance Set Reset Coil Voltage in Ohms Voltage Voltage Current VDC ±10% VDC VDC (mA)

Typical Part Number B RT 3 2 4 A05 1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPDT) (Requires wiring diagram code 3.) 2 = 2 Form C (DPDT) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10. 5. Coil Voltage:

1 Coil 2 Coil Voltage

A05 F05 = 5VDC A06 F06 = 6VDC A12 F12 = 12VDC A24 F24 = 24VDC Stock Items Consult factory for availability. .62 (15.7) .50 (12.7) 1.14 (29) 6X .031 X .020 (.80 X .52) 2X .020 X .020 (.52 X .52) *2 Coil version only .17 (4.3) 12 22 11 21 14 24

22 A2A3*

A1 A2A3* * 2 Coil Version Only Outline Dimensions Wiring Diagrams (Bottom View) .296 (7.52) .788 (20.0) .394 (10.0) .051 DIA. (1.30) .051 DIA. (1.30) .148 (3.76 * 2 Coil Version Only PC Board Layout (Bottom View) Breaking Capacity

1 Pole 16A 2 Pole 8A

Code 3 & 5 0.1 0.5 0.1 0.5 10 20 50 100 200 300 10 20 50 100 200 300 DC Voltage DC Voltage Contact Current Contact Current A B A B A: 1 Contact. B: 2 Contacts in series. A: 16A Version. B: 12A Version.

RT78625 with RPMU0730 RP78601 RT16016 2.972 (75.5) .610 (15.5) .177 (4.5) .874 (22.2) 1.693 (43) A1A2 21 11 2.972 (75.5) .610 (15.5) .177 (4.5) .874 (22.2) 1.693 (43) 1.22 (31.0) (12.7) .425 (10.8) .354 (9.0) .189 (4.8) .189 (4.8) RT786241 10A, 300VAC 5mm Pinning RT786251,2

1 Pole 10A, 250VAC

2 Pole 2x 10A, 250VAC

10A, 250VAC 3.5mm Pinning Ø .06 DIA. (1.52) .60 (15.24) .30 (7.62) .80 (20.32) .138 (3.51) 1.22 (31.0) (12.7) .425 (10.8) .354 (9.0) .189 (4.8) .189 (4.8) RP786021 Ø .06 DIA. (1.52) .60 (15.24) .30 (7.62) .20 (5.08) .20 (5.08) Hold-Down Spring RT16016 Hold-Down Spring RT16016 Hold-Down Spring RP16041 Hold-Down Spring RP16041 PC Board Layout (Bottom View) PC Board Layout (Bottom View) 2.972 (75.5) .610 (15.5) .177 (4.5) .874 (22.2) 2.283 (58) Relay Ejector Module RT786261,2

1 Pole 12A, 300VAC

2 Pole 2x 12A, 300VAC

Ejector/Hold-Down Spring RT160163 * Note 1. Not suitable for bistable relay with two coils. 2. For a 16A1 pole relay the following jumpers have to be connected; 11 to 21, 12 to 22 and 14 to 24. 3. Insertion of the relay. First the ejector (and eventually the module) has to be mounted onto the socket. Then the relay has to be set in the correct position and pressed into the socket until the ejector snaps over the top of the relay. Sockets for RT Series Relays Socket Socket Termination Hold-Down Spring RT786241,2 DIN Screw Terminal RT16016 RT786251,2 DIN Screw Terminal RT16016 RT786261 DIN Screw Terminal RT16016 RP786011 PCB RP16041 RP786021 PCB RP16041 RPMU0730 RC Network 110..230VAC – Socket and Accessory Selection Table Stock items are boldfaced. Siemens Electromechanical Components, Inc.

700 Westpark Drive

Peachtree City, GA 30269-1498 Specifications and availability subject to change without notice. 13C7800 Printed in U.S.A. IH/2-99