RSGHB7C-C06 EVERLIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (12mm Tape) ․Pb-free ․The product itself will remain within RoHS compliant version. Descriptions ․The 99-135 series is available in soft red, green and blue. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.
Applications
․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Type Material Emitted Color Lens Color RS AlGaInP Brilliant Red GH InGaN Brilliant Green B7 InGaN Blue Water Clear
EVERLIGHT ELECTRONICS CO.,LTD. 99-135/RSGHB7C-C06/2D Device No. : prepared date:07-Feb-2007 Prepared by: Ray Yuan Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD. 99-135/RSGHB7C-C06/2D Device No. : prepared date:07-Feb-2007 Prepared by: Ray Yuan Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V RS 50 GH 30 Forward Current I F B7 30 mA RS 100 GH 100 Peak Forward Current(Duty 1/10@ 1KHZ) IFP B7 100 mA RS 130 GH 110 Power Dissipation Pd B7 110 mW RS 2000 GH 2000 Electrostatic Discharge(HBM) ESD B7 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec.
EVERLIGHT ELECTRONICS CO.,LTD. 99-135/RSGHB7C-C06/2D Device No. : prepared date:07-Feb-2007 Prepared by: Ray Yuan Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition RS 50 80 ----- GH 200 300 ----- Luminous Intensity Iv B7 20 40 ----- mcd I F=5mA Viewing Angle 2 θ1/2 ----- 120 ----- deg I F=5mA RS ----- 632 ----- GH ----- 518 ----- Peak Wavelength λp B7 ----- 468 ----- nm I F=5mA RS ----- 625 ----- GH ----- 530 ----- Dominant Wavelength λd B7 ----- 460 ----- nm IF=5mA RS ----- 20 ----- GH ----- 36 ----- Spectrum Radiation Bandwidth △λ B7 ----- 26 ----- nm IF=5mA RS ----- 1.8 2.4 GH ----- 3.0 3.7 Forward Voltage V F B7 ----- 3.0 3.7 V I F=5mA Reverse Current I R RS ----- ----- 10 μA V R=5V
EVERLIGHT ELECTRONICS CO.,LTD. 99-135/RSGHB7C-C06/2D Device No. : prepared date:07-Feb-2007 Prepared by: Ray Yuan Typical Electro-Optical Characteristics Curves(RS)
EVERLIGHT ELECTRONICS CO.,LTD. 99-135/RSGHB7C-C06/2D Device No. : prepared date:07-Feb-2007 Prepared by: Ray Yuan Typical Electro-Optical Characteristics Curves(GH)
EVERLIGHT ELECTRONICS CO.,LTD. 99-135/RSGHB7C-C06/2D Device No. : prepared date:07-Feb-2007 Prepared by: Ray Yuan Typical Electro-Optical Characteristics Curves(B7)
EVERLIGHT ELECTRONICS CO.,LTD. 99-135/RSGHB7C-C06/2D Device No. : prepared date:07-Feb-2007 Prepared by: Ray Yuan Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: Tolerances Unless Dimension ±0.1mm ,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD. 99-135/RSGHB7C-C06/2D Device No. : prepared date:07-Feb-2007 Prepared by: Ray Yuan Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: 1.Tolerances Unless Dimension ±0.1mm Unit = mm Moisture Resistant Packaging Label Desiccant LabelAluminum moisture-proof bag
EVERLIGHT ELECTRONICS CO.,LTD. 99-135/RSGHB7C-C06/2D Device No. : prepared date:07-Feb-2007 Prepared by: Ray Yuan Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 10sec. 6 min 22 PCS. 0/1
2 Temperature Cycle
H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life I F = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85℃/RH85% 1000 Hrs. 22 PCS. 0/1
EVERLIGHT ELECTRONICS CO.,LTD. 99-135/RSGHB7C-C06/2D Device No. : prepared date:07-Feb-2007 Prepared by: Ray Yuan Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 ℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition
3.1 Pb-free solder temperature profile
120 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 ℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
EVERLIGHT ELECTRONICS CO.,LTD. 99-135/RSGHB7C-C06/2D Device No. : prepared date:07-Feb-2007 Prepared by: Ray Yuan 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiw an, R.O.C http://www.everlight.com