RSE RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • 2:1 Wide Input Range
  • 2kVDC/1 Second Isolation
  • -40°C To +75°C Operating Temperature @ Full Load
  • Industry Standard Pinout (SIP8)
  • EN/UL62368, UL60950, CB Report (pending)
  • Low Cost RSE

Description

The RSE is a low cost isolated, regulated and short-circuit protected DC/DC converter designed for industrial applications. A compact SIP8 case size, 2:1 input, 2kVDC isolation and a wide operating temperature range of -40°C to +75°C without derating makes the RSE series ideal for industrial, transport and general-purpose on-board 5V power supplies. Industrial Class A EMC levels can be met with a simple Pi-filter and the converters come with a three year warranty.

3 YEAR

Part nom. Input Input Current Output Output Efficiency max. Capacitive Number Voltage @ full load Voltage Current typ. (1) Load (2) [VDC] [mA] [VDC] [mA] [%] [µF] RSE-0505S/H2 4.5 - 9 526 5 400 76 6800 RSE-2405S/H2 18 - 36 103 5 400 80 6800 Notes: Note1: Efficiency is tested at nominal input and full load at +25°C ambient Note2: Max. cap load is tested at nominal input and full resistive load BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Internal Input Filter capacitor Input Voltage Range nom. Vin= 5VDC 24VDC 4.5VDC 18VDC 5VDC 24VDC 9VDC 36VDC Maximum Reverse Voltage 0VDC Input Surge Voltage 100ms max nom. Vin= 5VDC 24VDC 15VDC 50VDC Quiescent Current nom. Vin= 5VDC 24VDC 40mA 3mA Start-up time 500µs Rise time 450µs Hold-up time 10µs Internal Operating Frequency 130kHz Minimum Load 0% Output Ripple and Noise (3) 20MHz BW, 0-100% load 75mVp-p ON/OFF CTRL (4) DC-DC ON DC-DC OFF Open or 0V<Vr<0.8VDC 2V<Vr<6VDC Input Current of CTRL Pin 5V VCTRL 3.3V VCTRL 15mA 10mA Standby Current 0.75mA 1.5mA continued on next page Notes: Note3: Measurements are made with a 0.1µF MLCC across output (low ESR) Note4: Please refer to „Application and Installation“ Specifications (measured @ ta= 25°C, nominal Vin, full load unless otherwise specified) UL62368-1 certified C22.2 No. 62368-1-14 certfied UL60950 (pending) C22.2 No. 60950-1-07 (pending) IEC/EN62368-1 (pending) EN55022/55024 compliant CB Report E224736

Short Circuit Protection (SCP) below 100mW continuous, auto recovery Isolation Voltage I/P to O/P tested for 1 second 2kVDC Isolation Resistance 1GW min. Isolation Capacitance 100pF max. Insulation Grade functional continued on next page REGULATIONS Parameter Condition Value Output Accuracy 0-100% load ±2.0% max. Line Regulation low line to high line, full load ±0.2% max. Load Regulation 0% to 100% load ±0.5% max. ECO-2 REV.: 1/2017 www.recom-power.com RSE Series Specifications (measured @ ta= 25°C, nominal Vin, full load unless otherwise specified) Efficiency vs. Load RSE-0505S/H2 RSE-0505S/H2 RSE-2405S/H2 RSE-2405S/H2 Accuracy vs. Load Efficiency [%] Output Current [A] 100 0.1 0.2 0.3 0.4 4.5Vin 5Vin 7Vin 9Vin Accuracy [%] Output Current [A] 0.2 0.1 0.3 0.4 0.5 0.6 0.1 0.2 0.3 0.4 Efficiency [%] Output Current [A] 100 0.1 0.2 0.3 0.4 18Vin 20Vin 24Vin 30Vin 36Vin Accuracy [%] Output Current [A] 0.1 0.2 0.3 0.4 0.5 0.1 0.2 0.3 0.4

Specifications (measured @ ta= 25°C, nominal Vin, full load unless otherwise specified) RSE Series ECO-3REV.: 1/2017www.recom-power.com ENVIRONMENTAL Parameter Condition Value Operating Temperature Range without derating (see graph) -40°C to +75°C Maximum Case Temperature +105°C Temperature Coefficient ±0.05%/°C Operating Altitude 5000m Operating Humidity non-condensing 5% - 95% RH max. Pollution Degree PD2 MTBF according to MIL-HDBK-217F, G.B. +25°C +75°C 2289 x 103 hours 781 x 103 hours Vibration MIL-STD 202G 100 -40 0 50 75 100 150 Output Power [%] Ambient Temperature [°C] Derating Graph (@ Chamber and natural convection 0.1m/s) Notes: Note5: An input fuse is required if the mains supply is not over-current protected. Recommended fuse: T2A slow blow type +Vin -Vin LOAD Dsurge Fuse Surge Protection Circuit according to EN61000-4-5, Criteria A nom. Vin TVS C1 5VDC P4SMAJ11A N/A 24VDC P4SMAJ36A 220µF/100V SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard Information Technology Equipment, General Requirements for Safety pending UL60950-1, 2nd Edition, 2014 CSA C22.2 No. 60950-1-07, 2nd Ed. 2014 Audio/Video, information and communication technology equipment - Safety require- ments E224736-A48 UL62368-1, 2nd Edition, 2014 CSA C22.2 Nr. 62368-1-14, 2nd Ed. 2014 Audio/Video, information and communication technology equipment - Safety require- ments (CB Scheme) pending IEC/EN62368-1, 2nd Edition, 2014 RoHS2 RoHS 2011/65/EU + AM2015/863 continued on next page

EMC Compliance Conditions Standard / Criterion Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement with external filter (see filter suggestion below) EN55022, Class A EN55022, Class B Information technology equipment - Immunity characteristics - Limits and methods of measurement EN55024, 2015 ESD Electrostatic discharge immunity test ±8kV Air; ±4kV Contact IEC6100-4-2, Criteria A Radiated, radio-frequency, electromagnetic field immunity test 3V/m IEC6100-4-3, Criteria A Fast Transient and Burst Immunity DC Power Port: ±0.5kV IEC6100-4-4, Criteria A Surge Immunity DC Power Port: ±0.5kV IEC6100-4-5, Criteria A Immunity to conducted disturbances, induced by radio-frequency fields DC Power Port: 3V IEC6100-4-6, Criteria A Power Magnetic Field 50Hz, 1A/m IEC6100-4-8, Criteria A RSE Series Specifications (measured @ ta= 25°C, nominal Vin, full load unless otherwise specified) DC/DC Converter ECO-4 REV.: 1/2017 www.recom-power.com DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Potting PCB non-conductive black plastic, (UL94-V0) epoxy, (UL94-V0) FR4, (UL94-V0) Package Dimension (LxWxH) 21.8 x 9.2 x 11.1mm Package Weight 4.7g typ. continued on next page EMC Filtering Suggestions for EN55022 Class A EMC Filtering Suggestions for EN55022 Class B C1 C2 +Vin -Vin +Vout -Vout C1 C2 +Vin -Vin +Vout -Vout nom. Vin C1 C2 L1 5VDC 22µF/50V MLCC 22µF/50V MLCC 3µH Choke24VDC nom. Vin C1 C2 C3 L1 5VDC 22µF/50V MLCC 22µF/50V MLCC 1000pF/3kV 0.45mH CMC24VDC

Specifications (measured @ ta= 25°C, nominal Vin, full load unless otherwise specified) RSE Series ECO-5REV.: 1/2017www.recom-power.com Dimension Drawing (mm) Pin Connection Pin # Single 1 -Vin 2 +Vin

3 CTRL

NC= no connection Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm Pin dimension: ±0.1mm Bottom View Top View 0.503.2 11.1 0.51 9.2 1.00 Ø +0.15/-0 21.8 7x2.54= 17.782.0 4.1 0.25 2.54 2.54 1 2 3 65 7 8 Marking embossed logo Recommended Footprint Details PACKAGING INFORMATION Packaging Dimension (LxWxH) tube 520.0 x 11.2 x 18.2mm Packaging Quantity 22pcs Storage Temperature Range -55°C to +125°C Storage Humidity 5% - 95% RH max. The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. INSTALLATION and APPLICATION continued on next page ON/OFF CTRL Circuit DC-DC ON: Open or 0V<Vr<0.8VDC DC-DC OFF: 2V<Vr<6VDC68Ω 1N4148 +Vin VCTRL -Vin +Vout -Vout