RS6 RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • Highest Power Density In SIP Package
  • 1.6kVDC/1 Minute Isolation
  • Efficiency Up To 88%
  • -40°C To +75°C Operating Temperature Range @ Full Load
  • EN60950 And UL/EN62368-1 (pending) CB Report
  • Industry Standard Pinout RS6 EN60950-1 (pending) EN62368-1 (pending) UL62368-1 (pending) EN55022 compliant

Description

The RS6 series offer very high power density (2.7W/cm³), wide input voltage range and an industrial operating temperature range of -40°C to +75°C without derating. High efficiency, tight regulation, 2kVDC isolation and remote on/off are just some of the characteristics of this advanced SIP8 6W converter which is ideal for high density power supply designs in demanding industrial applications.

3 YEAR

Part nom. Input Output Output Efficiency max. Capacitive Number Voltage Voltage Current typ. (1) Load (2) [VDC] [VDC] [mA] [%] [µF] RS6-053.3S 5 3.3 1300 83 6600 RS6-0505S 5 5 1200 86 3300 RS6-0512S 5 12 500 87 1600 RS6-0515S 5 15 400 86 1400 RS6-0505D 5 ±5 ±600 84 ±2000 RS6-0512D 5 ±12 ±250 87 ±900 RS6-0515D 5 ±15 ±200 86 ±660 RS6-123.3S 12 3.3 1300 81 6600 RS6-1205S 12 5 1200 86 3300 RS6-1212S 12 12 500 87 1600 RS6-1215S 12 15 400 87 1400 RS6-1205D 12 ±5 ±600 85 ±2000 RS6-1212D 12 ±12 ±250 87 ±900 RS6-1215D 12 ±15 ±200 87 ±660 RS6-243.3S 24 3.3 1300 81 6600 RS6-2405S 24 5 1200 87 3300 RS6-2412S 24 12 500 87 1600 RS6-2415S 24 15 400 87 1400 RS6-2405D 24 ±5 ±600 85 ±2000 RS6-2412D 24 ±12 ±250 87 ±900 RS6-2415D 24 ±15 ±200 87 ±660 RS6-483.3S 48 3.3 1300 81 6600 RS6-4805S 48 5 1200 87 3300 RS6-4812S 48 12 500 87 1600 RS6-4815S 48 15 400 88 1400 RS6-4805D 48 ±5 ±600 85 ±2000 RS6-4812D 48 ±12 ±250 87 ±900 RS6-4815D 48 ±15 ±200 88 ±660 Notes: Note1: Efficiency tested at nominal input and full load at +25°C ambient. Note2: Max Cap Load tested at minimum input and constant resistor load.

Parameter Condition Min. Typ. Max. Input Filter capacitor Input Voltage Range nom. Vin= 5VDC 12VDC 24VDC 48VDC 4.5VDC 9VDC 18VDC 36VDC 5VDC 12VDC 24VDC 48VDC 9VDC 18VDC 36VDC 75VDC Input Surge Voltage 1 second max. nom. Vin= 5VDC 12VDC 24VDC 48VDC 15VDC 25VDC 50VDC 100VDC Quiescent Current nom. Vin= 5VDC 2VDC 24VDC 48VDC 105mA 55mA 28mA 14mA Output Voltage Trimming see calculation on next page Trim up Trim down +10% -8% Start-up time 2ms Under Voltage Lockout nom. Vin= 5V DC-DC ON DC-DC OFF 4.5VDC 2.7VDC nom. Vin= 12V DC-DC ON DC-DC OFF 9VDC 7VDC nom. Vin= 24V DC-DC ON DC-DC OFF 18VDC 15VDC nom. Vin= 48V DC-DC ON DC-DC OFF 36VDC 30VDC ON/OFF CTRL DC-DC ON DC-DC OFF Open 5V<Vr<10VDC Internal Operating Frequency 0-100% load 200kHz Minimum Load 0% Output Ripple and Noise (3) 20MHz BW 50mVp-p 75mVp-p continued on next page ECO-2 REV.: 2/2017 www.recom-power.com RS6 Series Specifications (measured @ ta= 25°C, nominal input voltage, full load and after warm up unless otherwise specified) Efficiency vs. Load RS6-1205S RS6-2405S Notes: Note3: Measurements are made with a 1.0µF MLCC across output (low ESR). 9Vin 12Vin 15Vin 18Vin 18Vin 24Vin 30Vin 36Vin Efficiency [%] Output Load [A] 100 Efficiency [%] Output Load [A] 100

Specifications (measured @ ta= 25°C, nominal input voltage, full load and after warm up unless otherwise specified) RS6 Series ECO-3REV.: 2/2017www.recom-power.com Output Voltage Trimming Trim Calculation Practical Example: Trim UP Trim DOWN Vref +Vout Trim R1 Rdown Vref -Vout Trim Rup Vref +Vout Trim Rdown Vref -Vout Trim Rup Vout 3.3V 5V 12V 15V R1 16.74kΩ 10kΩ 38kΩ 50kΩ R2 10kΩ R3 52.3kΩ 39kΩ 68kΩ 68kΩ Vref 1.24V 2.5V a = q Vref r * R1 = kΩ (Vout + DVout) - Vref Rup = q a*R2 r - R3 = kΩ R2 - a Rdown = q b*R1 r - R3 = kΩ R1 - b a = q 2.5V r * 10kΩ = 8.33kΩ (5V + 0.5V) - 2.5V b = q (Vout + DVout) - Vref r * R2 = kΩ Vref Rup = q 8.33kΩ * 10kΩ r - 39 = 11.0kΩ 10kΩ - 8.33kΩ RS6-xx03.3S RS6-xx05S RS6-xx12S RS6-xx15S Trim up 1 2 3 4 5 6 7 8 9 10 % Trim up 1 2 3 4 5 6 7 8 9 10 % Trim up 1 2 3 4 5 6 7 8 9 10 % Trim up 1 2 3 4 5 6 7 8 9 10 % Trim Up: Vout = 5V, DVout = 0.5V (10%), Vref= 2.5V Vout = nom. Output Voltage DVout = Output Voltage Trim Rup = Trim up resistor Rdown = trim down resistor a = trim up factor b = trim down factor DVout = Vout - Vouttrimmed

Parameter Condition Values Output Accuracy ±1.0% typ. Line Regulation low line to high line ±0.2% typ. Load Regulation 0% to 100% load ±1.0% typ. Cross Regulation 25% to 100% load ±5.0% typ. Transient Response 25% load step change 500µs typ. RS6 Series Specifications (measured @ ta= 25°C, nominal input voltage, full load and after warm up unless otherwise specified) DC/DC Converter ECO-4 REV.: 2/2017 www.recom-power.com Accuracy vs Load RS6-1205S RS6-2405S 9Vin 12Vin 15Vin 18Vin 18Vin 24Vin 30Vin 36Vin Accuracy [%] Output Load [A] 0.1 0.2 0.15 0.25 0.3 0.4 0.35 0.5 0.45 0.5 1.0 1.2 Accuracy [%] Output Load [A] -0.2 -0.25 -0.1 -0.15 -0.05 0.1 0.05 0.2 0.15 0.5 1.0 1.2 RS6-xx03.3S RS6-xx05S RS6-xx12S RS6-xx15S Trim down: Vout = 5V, DVout = -0.4V (-8%), Vref= 2.5V 2.5V Rdown = q 8.4kΩ * 10kΩ r - 39kΩ = 13.5kΩ 10kΩ - 8.4kΩ

Operating Temperature Range (5) without derating (see graph) -40°C to +75°C Maximum Case Temperature +105°C Temperature Coefficient ±0.02%/°C Operating Humidity non-condensing 5% - 95% RH max. Vibration MIL-STD-202G MTBF according to MIL-HDBK-217F, G.B. +25°C 1776 x 103 hours SAFETY AND CERTIFICATIONS Certificate Type Report / File Number Standard Information Technology Equipment, General Requirements for Safety (LVD) pending EN60950-1, 2nd Endition AM2 , 2013 Audio/video, information and communication technology equipment - Safety requirements (CB Scheme) pending EN62368-1, 2014 UL62368-1, 2nd Edition, 2014 CAN/CSA C22.2 No. 62368-1-14, 2014 RoHS2 RoHS-2011/65/EU + AM-2015/863 EMC Compliance Condition Standard / Criterion Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement with external filter (see filter suggestions) EN55022, Class A EN55022, Class B continued on next page DC/DC Converter Specifications (measured @ ta= 25°C, nominal input voltage, full load and after warm up unless otherwise specified) RS6 Series ECO-5REV.: 2/2017www.recom-power.com 100 -40 0 604020-20 100 8575 12080 Output Power [%] Ambient Temperature [°C] Safe Operating Area Notes: Note5: Derating Graph is referring to RS6-0505S. For more details, please contact our technical support service at TechsupportAT@recom-power.com. PROTECTIONS Parameter Condition Value Short Circuit Protection (SCP) below 100mΩ continuous, automatic revovery Over Load Protection (OLP) 150% load, continuous, autmatic recovery Isolation Voltage I/P to O/P tested for 1 second rated for 1 minute 2kVDC 1.6kVDC Isolation Capacitance 110pF max. Isolation Resistance 1GΩ typ. Isolation Grade Functional Derating Graph (@ Chamber and natural convection 0.1m/s)

ESD Electrostatic discharge immunity test ±8kV Air Discharge, ±6kV Contact Discharge EN61000-4-2, Criteria A Radiated, radio-frequency, electromagnetic field immunity test 10V/m EN61000-4-3, Criteria A Fast Transient and Burst Immunity ±2kV EN61000-4-4, Criteria A Surge Immunity ±1kV EN61000-4-5, Criteria A Immunity to conducted disturbances, induced by radio-frequency fields 10Vr.m.s EN61000-4-6, Criteria A RS6 Series Specifications (measured @ ta= 25°C, nominal input voltage, full load and after warm up unless otherwise specified) DC/DC Converter ECO-6 REV.: 2/2017 www.recom-power.com C1 C2 +Vin -Vin LOADL1 L1 L2C1 C2 C4 C5C3 C6 +Vin -Vin LOAD EMC Filtering - Suggestions for EN55022 Class A EMC Filtering - Suggestions for EN55022 Class B Model C1 C2 L1 RS6-05xx 22µF N/A 1µH CMC RS6-12xx 4.7µF 2.2µH CMC RS6-24xx 6.8µH CMC RS6-48xx 2.2µF 2.2µF 10µH CMC Model C1 C2 L1 C3 C4 L2 C5 C6 C7 C8 RS6-05xx 22µF N/A 1µH CMC 10µF N/A 200µH CMC 10µF N/A 47pF 100pFRS6-12xx 10µF 6.8µH CMC 4.7µF RS6-24xx 4.7µF 10µH CMC 4.7µF 4.7µF N/A 33pF 220pF RS6-48xx 2.2µF 2.2µF 22µH CMC 2.2µF 2.2µF 600µH CMC 1µF 47pF 680pF Surge Protection Circuit according to EN61000-4-5, Criteria A Csurge Dsurge +Vin -Vin LOAD Input Voltage Csurge Dsurge max. Surge Voltage 5VDC 100V, 220F E/Cap TVS (P4SMAJ15CA) ±1kVDC12VDC N/A24VDC 48VDC

DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Potting non conductive plastic (UL94V-0) Epoxy (UL94V-0) Package Dimension (LxWxH) 21.8 x 9.2 x 11.1mm Package Weight 4.0g The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. PACKAGING INFORMATION Packaging Dimension (LxWxH) tube 520.0 x 18.2 x 11.2mm Packaging Quantity 22pcs Storage Temperature Range -55°C to +125°C Storage Humidity non-condensing 95% RH max. Dimension Drawing (mm) 0.503.2 11.1 0.5 9.2 1.00 Ø +0.15/-0 21.8 7 x 2.54 = 17.782.0 4.1 0.25 RS6 Series 2.54 2.54 1 2 3 6 7 85 Marking embossed logo Bottom View Top View Recommended Footprint Details Pin Connections Pin # Single Dual 1 -Vin -Vin 2 +Vin +Vin

3 CTRL CTRL

5 Trim NC

8 NC -Vout

NC= no connection Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm Pin dimension: ±0.1mm Pin pitch: ±0.25mm DC/DC Converter Specifications (measured @ ta= 25°C, nominal input voltage, full load and after warm up unless otherwise specified) RS6 Series ECO-7REV.: 2/2017www.recom-power.com