RS1J

RS1A GE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

SURFACE MOUNT FAST SWITCHING RECTIFIER Reverse Voltage - 50 to 800 Volts Forward Current - 1.0 Ampere

FEATURES

♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ For surface mounted applications in order to optimize board space ♦ Low profile package ♦ Built-in strain relief, ideal for automated placement ♦ Fast switching for high efficiency ♦ Glass passivated chip junction ♦ High temperature soldering: 250°C/10 seconds at terminals MECHANICAL DATA Case: JEDEC DO-214AC molded plastic over passivated chip Terminals:Solder plated, solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Weight:0.002 ounce, 0.064 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS RS1A RS1B RS1D RS1G RS1J RS1K UNITS Device marking code RA RB RD RG RJ RK Maximum repetitive peak reverse voltage V RRM 50 100 200 400 600 800 Volts Maximum RMS voltage V RMS 35 70 140 280 420 500 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 Volts Maximum average forward rectified current at TL=90°C I(AV) 1.0 Amp Peak forward surge current 8.3ms single half sine-wave superimposed on I FSM 30.0 Amps rated load (JEDEC Method) TL=90°C Maximum instantaneous forward voltage at 1.0A V F 1.30 Volts Maximum DC reverse current T A=25°C 5.0 at rated DC blocking voltage T A=125°C IR 50.0 µA Maximum reverse recovery time (NOTE 1) trr 150 250 ns Typical junction capacitance (NOTE 2) C J 10.0 7.0 pF Maximum thermal resistance (NOTE 3) R Θ JA 105.0 R Θ JL 32.0 °C/W Operating junction and storage temperature range T J, TSTG -55 to +150 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient and from junction to lead mounted on 0.157 (3.99) 0.177 (4.50) 0.006 (0.152) 0.012 (0.305) 0.030 (0.76) 0.060 (1.52) 0.008 (0.203) MAX. 0.194 (4.93) 0.208 (5.28) 0.100 (2.54) 0.110 (2.79) 0.078 (1.98) 0.090 (2.29) 0.049 (1.25) 0.065 (1.65) DO-214A C MODIFIED J-BEND Dimensions are in inches and (millimeters)

0 20 40 60 80 100 120 140 160 180 0.5 1.0 1.2 11 0 1 0 00 0.01 0.1 11 0 1 0 01 0 2 04 06 08 0 1 0 0 0.01 0.1 0.01 0.1 1 10 100 RATINGS AND CHARACTERISTIC CURVES RS1A THRU RS1J FIG. 1 - FORWARD CURRENT DERATING CURVE LEAD TEMPERATURE, °C AVERAGE FORWARD CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE JUNCTION CAPACITANCE, pF TRANSIENT THERMAL IMPEDANCE ( °C/W) REVERSE VOLTAGE, VOLTS t, PULSE DURATION, SEC TL = 90°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=25°C TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE TJ=25°C f=1.0 MHZ Vsig=50mVp-p MOUNTED ON 0.2 x 0.2” (5x5mm) COPPER PAD AREA COPPER PAD AREAS RESISTIVE OR INDUCTIVE LOAD TJ=125°C TJ=125°C PERCENT OF RATED PEAK REVERSE VOLTAGE, % TJ=100°C 1.0