RRP29080-10 RFHIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Pulse Amp Module RRP29080-10 Korean Facilities : 82 -31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 1 / 4 V ersion 1.0 Product Features Applications
- Frequency from 2.7 ~ 3.1GHz
- GaN HEMT
- 50 Ohm Input/Output impedance
- High efficiency
- Radar system
Description
The RRP29080-10 is designed for Radar system application frequencies from 2.7 ~ 3.1GHz. This module uses GaN HEMT technology which performs high breakdown voltage, wide bandwidth and high efficiency. Electrical Specifications @ VDS =50V , T=25C, 50 System PARAMETER UNIT MIN TYP MAX SYMBOL Operating Frequency MHz 2700 - 3100 fO Operating Bandwidth MHz - 400 - BW Output Pulse Power W 70 80 - PO Input Pulse Power dBm 14 - - PI Power Gain dB - 36 - GP Gain Flatness dB - - 1.0 ∆GP Duty Cycle % - - 20 DC Pulse Width us - - 500 PW Efficiency % - 38 - Eff Amplitude Pulse Droop dB - 0.5 1.0 Droop Harmonics 1 to N dBc 30 - - HN Spurious Level dBc 60 - - Spur Rise Time ns - - 200 tr Fall Time ns - - 200 tf Phase Deviation ˚ -20 - 20 ∆φ Test Pulse conditions = 100us, 10% Above electrical specifications is measured by connecting electrolytic condense r 1,000uF to DC. Please make sure that electrolytic condenser is connected properly while testing the module. Custom design available
Pulse Amp Module RRP29080-10 Korean Facilities : 82 -31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 2 / 4 V ersion 1.0 Absolute Maximum Ratings PARAMETER UNIT RATING SYMBOL Thermal Resistance °C/W 1.1 RTH(JC) Operating Junction Temperature °C 225 TJ Operating Flange Temperature °C -20 ~ 100 TC Storage Temperature °C -50 ~ 150 TSTG Operating Voltages PARAMETER UNIT NOMINAL VOLTAGE VOLTAGE ACCURACY SYMBOL Drain-Source Voltage V 50 ± 5% VDS Switching Voltage V TTL Low(0V) : PA ON, TTL High(5V) : PA OFF VDC Power Supply * Duty Cycle 10%, Pulse Width 100us PARAMETER UNIT MIN TYP MAX SYMBOL Drain-Source Current(A VG) A - - - IDS Block diagram Mechanical Specifications PARAMETER UNIT TYP Mass kg 0.1 Dimension ㎜ 145 x 34 x 10 RF Connector - 50 ohm Pad(SMA Connector available) : RF Input 50 ohm Pad(SMA Connector available): RF Output DC Connector - DC Pad : VDS DC Pad : VDC DC Pad : GND
Pulse Amp Module RRP29080-10 Korean Facilities : 82 -31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 3 / 4 V ersion 1.0 Outline Drawing * Unit: mm[inch] | Tolerance ±0.15[.006]
Pulse Amp Module RRP29080-10 Korean Facilities : 82 -31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 4 / 4 V ersion 1.0
Revision History
Part Number Release Date Version Modification Data Sheet Status RRP29080-10 2012.9.6 1.0 - - RFHIC Corporation reserves the right to make changes to any products herein or to discontinue any pr oduct at any time without notice. While product specifications have been thoroughly examined for reliability, RFHIC Corporation strongly recommends buyers to verify that the information they are using is accurate before ordering. RFHIC Corporation does not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, inc luding without limitation consequential or incidental damages. RFHIC products are not intended for use in life support equipment or application where malfu nction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC Corporation and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorized use. Sales, inquiries and support should be directed to the local authorized geographic distributor for RFHIC Corporation. For customers in the US, please contact the US Sales Team at 919- 677-8780. For all other inquiries, please contact the International Sales Team at 82-31-250-5078.