RRP03250-10 RFHIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Pulse Amp Module RRP03250-10 Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 1 / 5 Version 1.0 Product Features Applications
- Frequency from 135 ~ 460MHz
- GaN on SiC
- 50 Ohm Input/Output impedance
- High efficiency
- Radar system
Description
The RRP03250-10 is designed for Radar system application frequencies from 135 ~ 460MHz. This module uses GaN on SiC technology which performs high breakdown voltage, wide bandwidth and high efficiency. Electrical Specifications @ VDS =+50V , T=25°C, 50Ω System PARAMETER UNIT MIN TYP MAX SYMBOL Operating Frequency MHz 135 - 460 Operating Bandwidth MHz - 325 - BW Peak power gain dB 29 31 - Gain Flatness dB - 1.5 2.5 Pulse input power dBm 22 - 26 Output Pulse Power W 250 300 - Duty cycle % - - 20 Pulse Width us - - 500 Harmonics 1 to N dBc - - -10 Spurious Level dBc - - -50 Amplitude pulse droop dB - 0.5 1.0 Efficiency % 35 40 - Rise time nsec - 80 150 Fall time nsec - 60 150 Input Return Loss dB - - -8 Operating Voltage VGS1 V - -3.2 - Operating Voltage VGS2 V - -3.3 - Operating Voltage VDS V 49 50 51 Dimension mm 114.3 x 25.4 x 28 ∗ Test Pulse conditions = 100us, 10% ∗ Above data is measured by connecting electrolytic condenser 10,000uF to DC. Please make sure that electrolytic condenser is connected properly while testing the module. ∗ Custom design available ∗ Caution : The drain voltage must be supplied to the device after the gate voltage is supplied
Pulse Amp Module RRP03250-10 Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 2 / 5 Version 1.0 Absolute Maximum Ratings PARAMETER UNIT RATING SYMBOL Gate Current mA 70 Ig Operating Junction Temperature °C 225 Tj Operating Flange Temperature °C -20 ~ 85 Tc Storage Temperature °C -40 ~ 105 Tstg Operating voltages PARAMETER UNIT NOMINAL VOLTAGE VOLTAGE ACCURACY SYMBOL Gate-Source Voltage V1 V -3.2(ON) , -8(OFF) ± 5% VGS1 Gate-Source Voltage V2 V -3.3 (ON) , -8(OFF) ± 5% VGS2 Drain-Source Voltage V3 V 50 ± 2% VDS
Pulse Amp Module RRP03250-10 Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 3 / 5 Version 1.0 Output Pulse Power Efficiency vs Frequency
Pulse Amp Module RRP03250-10 Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 4 / 5 Version 1.0 Outline Drawing * Unit: mm[inch] | Tolerance ±0.2[.008] Note Cover screw holes and Module Mount Holes would be changed. Interface Connector (SAMTEC, TSM-105-01-T-DH) Pin No Description I/O Specifications 1 VGS1 I -3.2V 2 VGS2 I -3.3V 3,4,5,6 GND I Ground 7,8,9,10 VDD I 50 VDC
Pulse Amp Module RRP03250-10 Korean Facilities : 82-31-250-5078 / rfsales@rfhic.com All specifications may change without notice US Facility : 919-677-8780 / sales@rfhicusa.com 5 / 5 Version 1.0
Revision History
Part Number Release Date Version Modification Data Sheet Status RRP03250-10 2012.9.6 1.0 - - RFHIC Corporation reserves the right to make changes to any products herein or to discontinue any product at any time without notice. While product specifications have been thoroughly examined for reliability, RFHIC Corporation strongly recommends buyers to verify that the information they are using is accurate before ordering. RFHIC Corporation does not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including wi thout limitation consequential or incidental damages. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expect ed to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC Corporation and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorized use. Sales, inquiries and support should be directed to the local authorized geographic distributor for RFHIC Corporation. For customers in the US, please contact the US Sales Team at 919- 677-8780. For all other inquiries, please contact the International Sales Team at 82-31-250-5078.