RP60-1233SE RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

Part Number Input Output Output Efficiency Range Voltage Current (VDC) (VDC) (A) (%) RP60-1233SE 9-18 3.3 15 78 RP60-1205SE 9-18 5 12 81 RP60-1212SE 9-18 12 5 82 RP60-1215SE 9-18 15 4 82 RP60-1205DE 9-18 ±5 +10 / -2 81 RP60-1212DE 9-18 ±12 ±2.5 82 RP60-1215DE 9-18 ±15 ±2.0 82 RP60-123305DE 9-18 3.3 / 5 6/6 78 RP60-2433SE 18-36 3.3 15 79 RP60-2405SE 18-36 5 12 83 RP60-2412SE 18-36 12 5 84 RP60-2415SE 18-36 +15 4 84 RP60-2405DE 18-36 ±5 +10 / -2 83 RP60-2412DE 18-36 ±12 ±2.5 87 RP60-2415DE 18-36 ±15 ±2.0 87 RP60-243305DE 18-36 3.3 / 5 6 / 6 80 RP60-4833SE 36-75 3.3 15 80 RP60-4805SE 36-75 5 12 84 RP60-4812SE 36-75 12 5 89 RP60-4815SE 36-75 15 4 89 RP60-4805DE 36-75 ±5 +10 / -2 84 RP60-4812DE 36-75 ±12 ±2.5 89 RP60-4815DE 36-75 ±15 ±2.0 89 RP60-483305DE 36-75 3.3 / 5.0 6 A/6 81 Specials Selection Guide 12V, 24V and 48V Input Types Maximum Capacitive Load RP60-xx05SE 20400µF RP60-xx12SE 3550µF RP60-xx15SE 3300µF RP60-xx33SE 38700µF RP60-xx05DE 17000µF (+5V) 3400µF (-5V) RP60-xx12DE 900µF RP60-xx15DE 600µF RP60-xx3305DE 16000µF (+3.3V) 10200µF (+5V)

PO 72 www.recom-international.comAugust 2002 POWERLINE - DC/DC-Converter E-Series, 60 Watt, 1.6 kV Isolation & Wide Input Range (Single & Dual Output) Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range See „Selection Guide“ table Input Filter Pi Type Reflected Ripple Current 75mA, p-p Voltage Accuracy, Single, Dual Output Models ±2.0%, max. Voltage Balance, Dual Output Models ±2%, max. Ripple & Noise, 20MHz BW 1% p-p of Vout Line Regulation: Single Output Models ±0.5%, max. Dual Output Models ±0.5%, max. Load Regulation (1/10 Load Full-Load) (xx3305DE) Models 3.3V Minimum Output Current 800mA) Single Output Models ±0.5%, max. Dual Output Models ±0.5%, max. Temperature Coefficient ±0.02%/°C Temp. Coefficient Balance ±1.0% Output Short Circuit Duration Continuous Short Circuit Protection. All outputs, by input Current limiting Output Short Circuit Duration Continuous Overvoltage Protection Threshold: 3.3V Output 3.9V 5.V Output 6.2V 12V Output 15V 15V Output 18V Control Voltage Referenced to Negative(-)Input Compatibility CMOS, TTL ON-Control 4.8V min. or Open OFF-Control 0.4V max. or Short Switching Frequency 200kHz, typ. Isolation Voltage 1600VDC, min Isolation Resistance 10 9 Ω Operating Temperature Range -25°C to +71°C Storage Temperature Range -55°C to +125°C Cooling Free-air Convection EMI/RFI Six-sided Continuos Shield Case Material Nickel-Coated Copper with Non-Conductive Base Dimensions 100 x 70 x 19 mm MTBF (MIL-HDBK-217F TA = 25°C full load) 1.250 x 10 5 Hours 10.00 10.00 10.00 10.00 10.00 10.00 10.00 10.00 25.40 82.60 7.6010.00 15.00 25.00 25.40 25.40 10.00 25.40 Bottom View See Note 2 70.00 1.3 8.0 19 Pin Pitch Tolerance ±0.5 mmNote: Mounting inserts: 4 - 40 x 2.5 Deep Package Style and Pinning (mm) Pin Connections Pin # Single Dual 3.3 VDC /

5.0 VDC

3 On/Off On/Off On/Off

4 Trim Trim Trim

5+ V out +Vout +3.3 Vout 6+ V out +Vout +3.3 Vout

7 Ground Ground Common

8 Ground Ground Common

9 N/P -Vout +5.0 Vout 10 N/P -Vout +5.0 Vout Output Power (%) 120 10050-25 125 Ambient Temperature °C 100 Natural Convection Cooling35 590 LFM 9 7 9 7 (7) RT1 or RT2 10 kΩ Trimpot4 Trim Up Trim Down (7) ( ) for single output for dual output for 3.3/5.0VDC External Output Trimming Output may optionally be externally trimmed (± 10%) with a fixed resistor or an external trimpot as shown.