RP40-243.3SGW RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Selection Guide 24V and 48V Wide Input Types Derating Graph (Ambient Temperature) Part Number Input Output Output Input (4,5) Efficiency(6) Capacitive(7) Range Voltage Current Current Load max. VDC VDC mA mA % µF RP40-243.3SGW 9-36 3.3 10000 80/1677 86 25750 RP40-2405SGW 9-36 5 8000 100/1984 88 13600 RP40-2412SGW 9-36 12 3333 100/1984 88 2360 RP40-2415SGW 9-36 15 2666 110/1984 88 1510 RP40-483.3SGW 18-75 3.3 10000 50/838 86 25750 RP40-4805SGW 18-75 5 8000 50/992 88 13600 RP40-4812SGW 18-75 12 3333 70/992 88 2360 RP40-4815SGW 18-75 15 2666 70/992 88 1510 RP40-2412DGW 9-36 ±12 ±1667 30/1984 88 ±1200 RP40-2415DGW 9-36 ±15 ±1333 30/1984 88 ±750 RP40-4812DGW 18-75 ±12 ±1667 20/992 88 ±1200 RP40-4815DGW 18-75 ±15 ±1333 20/992 88 ±750 /MT49/MT50/MT53 /MT55/MT53 /MT53/MT48 /MT50/MT53 /MT48 /MT49/MT48/MT48 /MT65/MT109/MT98/MT105/MT101/MT110/MT116/MT32/MT84/MT101/MT109/MT112/MT101/MT114/MT97/MT116/MT117/MT114/MT101/MT32/MT82/MT97/MT110/MT103/MT101/MT32/MT40/MT176/MT67/MT41 /MT45/MT52/MT48 /MT45/MT49/MT48 /MT48 /MT53/MT48 /MT54/MT48 /MT55/MT48 /MT56/MT48 /MT57/MT48 /MT49/MT48/MT48 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT80/MT111/MT119/MT101/MT114/MT32/MT40/MT37/MT41 /MT53/MT53 /MT78/MT97/MT116/MT117/MT114/MT97/MT108/MT32/MT67/MT111/MT110/MT118/MT101/MT99/MT116/MT105/MT111/MT110 /MT45/MT50/MT53 /MT49/MT49/MT48 /MT49/MT61/MT55/MT53/MT86/MT105/MT110/MT44/MT32/MT32/MT32/MT32/MT50/MT61/MT49/MT56/MT86/MT105/MT110/MT44/MT32/MT32/MT32/MT32/MT51/MT61/MT52/MT56/MT86/MT105/MT110 /MT78/MT111/MT109/MT32/MT86/MT105/MT110 /MT52/MT48 /MT49/MT50/MT51 RP40-4805SGW Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at info@recom-development.at * no suffix for CTRL function with Positive Logic (1=ON, 0=OFF), this is standard * add /N for CTRL function with Negative Logic (0=ON, 1=OFF) November-2006 www.recom-international.com280

Derating Graph (Ambient Temperature) /MT49/MT50/MT53 /MT55/MT53 /MT53/MT48 /MT50/MT53 /MT48 /MT49/MT48/MT48 /MT65/MT109/MT98/MT105/MT101/MT110/MT116/MT32/MT84/MT101/MT109/MT112/MT101/MT114/MT97/MT116/MT117/MT114/MT101/MT32/MT82/MT97/MT110/MT103/MT101/MT32/MT40/MT176/MT67/MT41 /MT45/MT52/MT48 /MT45/MT49/MT48 /MT48 /MT53/MT48 /MT54/MT48 /MT55/MT48 /MT56/MT48 /MT57/MT48 /MT49/MT48/MT48 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT80/MT111/MT119/MT101/MT114/MT32/MT40/MT37/MT41 /MT53/MT53 /MT78/MT97/MT116/MT117/MT114/MT97/MT108/MT32/MT67/MT111/MT110/MT118/MT101/MT99/MT116/MT105/MT111/MT110 /MT45/MT50/MT53 /MT49/MT49/MT48 /MT49/MT61/MT78/MT97/MT116/MT117/MT114/MT97/MT108/MT32/MT67/MT111/MT110/MT118/MT101/MT99/MT116/MT105/MT111/MT110/MT44/MT32/MT50/MT61/MT50/MT48/MT48/MT76/MT70/MT77/MT44/MT32/MT32/MT51/MT61/MT51/MT48/MT48/MT76/MT70/MT77/MT44 /MT52/MT61/MT52/MT48/MT48/MT76/MT70/MT77/MT44/MT32/MT32/MT53/MT61/MT53/MT48/MT48/MT76/MT70/MT77 /MT52/MT48 /MT49 /MT50/MT51/MT52/MT53 RP40-4805SGW POWERLINE DC/DC-Converter RP40-S_DGW Series Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range 24V nominal input 9-36VDC 48V nominal input 18-75VDC Undervoltage Protection 24V Input DC-DC ON = 9VDC, DC-DC OFF = 8VDC 48V Input DC-DC ON = 18VDC, DC-DC OFF = 16VDC Input Filter Pi Type Input Voltage Variation dv/dt (Complies with ETS300 132 part 4.4) 5V/ms max Input Surge Voltage (100 ms max.) 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple (nominal Vin and full load)(see Note 3) 20mAp-p Start Up Time (nominal Vin and constant resistor load) 20ms typ. Remote ON/OFF (see Note 7) (Positiv logic) DC-DC ON Open or 3V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V (Negativ logic) DC-DC ON Short or 0V < Vr < 1.2V DC-DC OFF Open or 3V < Vr < 12V Remote OFF input current Nominal input 24Vin: 10mA 48Vin: 5mA Output Power 40W max. Output Voltage Accuracy (full Load and nominal Vin) ±1% continued on next page November-2006 281www.recom-international.com

Specifications, cont. (typical at nominal input and 25°C unless otherwise noted) POWERLINE DC/DC-Converter RP40-S_DGW Series Voltage Adjustability (see Note 1) ±10% Load Regulation (0% to 100% full load) (see Notes 9, 10) Single ±0.5% Dual ±1% Line Regulation (low line, high line at full load) ±0.2% Cross Regulation (see Note 11) Dual ±5% Temperature Coefficient ±0.02%/°C max. Ripple and Noise (20MHz bandwith) Single 3.3, 5V 50mVp-p Single 12, 15V 75mVp-p Dual 12V 120mVp-p Dual 15V 150mVp-p Transient Response (25% load step change) 250µs Over Voltage Protection 3.3 Vout 3.9V Zener diode clamp (only single) 5 Vout 6.2V

12 Vout / ±12 Vout 15V / ±15V

15 Vout / ±15 Vout 18V / ±18V

Over Load Protection (% of full load at nominal Vin) 150% max. Short Circuit Protection Hiccup, automatic recovery Efficiency see „Selection Guide“ table Isolation Voltage 1600VDC min. Isolation Resistance 1 GΩ min. Isolation Capacitance 1500pF max. Operating Frequency 300kHz typ. Operating Temperature Range -40°C to +55°C(without derating) +55°C to +105°C(with derating) Maximum Case Temperature 105°C Storage Temperature Range -55°C to +125°C Over Temperature Protection 115°C typ. Thermal Impedance (see Note 8) Without Heat-Sink 9.2°C/Watt With Heat-Sink 7.6°C/Watt Thermal Shock MIL-STD-810D Vibration 10-55Hz, 10G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel plated copper Base Material Non-conductive black plastic FR4 Potting Material Epoxy (UL94-V0) Conducted Emissions (see Notes 12, 14) EN55022 Class A Radiated Emissions EN55022 Class A ESD EN61000-4-2 Perf. Criteria B Radiated Immunity EN61000-4-3 Perf. Criteria A Fast Transient EN61000-4-4 Perf. Criteria B Surge EN61000-4-5 Perf. Criteria B Conducted Immunity EN61000-4-6 Perf. Criteria A Weight 60g Dimensions 51.3 x 51.3 x 10.2mm MTBF (see Note 2) Bellcore TR-NWT-00332 1105 x 10 3 hours MIL-STD-217F 151 x 10 3 hours November-2006 www.recom-international.com282

Notes : POWERLINE DC/DC-Converter RP40-S_DGW Series 1. For the single output: Maximum output deviation is 10% inclusive of remote sense and trim. If remote sense is not being used, the +sense should be connected to its corresponding +OUTPUT and likewise the -sense should be connected to its corresponding –OUTPUT. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin. 4. Maximum value at nominal input voltage and full load. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistive load. 7. The ON/OFF control function. There are positive logic (standard) and negative logic (option). The pin voltage is referenced t o negative input To order negative logic ON/OFF control add the suffix-N (Ex: RP40-4805SGW-N). 8. Heat sink is optional and P/N: 7G-0026A. 9. The dual output required a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 10. Load regulation for dual output : Min load to 100% load balanced on all outputs. 11.Cross regulation for dual output : asymmetrical load 25% / 100% FL. 12..The RP40-GW series required external filter to meets EN55022 class A. 13.Output ripple and noise measured with a 0.1µF/50V MLCC. 14.See application notes for EMI-filtering. Package Style and Pinning (mm) /MT52 /MT50/MT56/MT46/MT50/MT48 /MT53/MT49/MT46/MT51/MT48 /MT50 /MT51 /MT52/MT53/MT46/MT55/MT48 /MT49/MT53/MT46/MT50/MT48 /MT66/MT111/MT116/MT116/MT111/MT109/MT32/MT86/MT105/MT101/MT119 /MT49/MT48/MT46/MT50/MT48 /MT100/MT105/MT97/MT46 /MT49/MT46/MT48 /MT49 /MT50/MT46/MT53 /MT49/MT53/MT46/MT51/MT48 /MT50/MT48/MT46/MT51/MT48 /MT53/MT46/MT49/MT48 /MT53 /MT54 /MT55 /MT56 /MT55/MT46/MT54 /MT53/MT46/MT49/MT48 /MT53/MT46/MT54 /MT48/MT46/MT55/MT48 /MT53/MT49/MT46/MT51/MT48 /MT51/MT114/MT100/MT32/MT97/MT110/MT103/MT108/MT101 /MT112/MT114/MT111/MT106/MT101/MT99/MT116/MT105/MT111/MT110 Pin Pitch Tolerance ±0.35 mm Pin Connections Pin # Single Dual 1 +Vin +Vin 2 -Vin -Vin

3 CTRL CTRL

4 -SENSE (Note 1) +Vout 5 +SENSE (Note 2) Com 6 +Vout Com 7 -Vout -Vout

8 TRIM TRIM

/MT84/MT114/MT105/MT109/MT32/MT85/MT112 /MT82/MT85 /MT84/MT114/MT105/MT109/MT32/MT68/MT111/MT119/MT110 /MT82/MT68 /MT55/MT40/MT55/MT41 /MT56/MT40/MT56/MT41 /MT56/MT40/MT56/MT41 /MT54/MT40/MT52/MT41 External Output Trimming Output can be externally trimmed by using the method shown below. ( ) for dual output trim November-2006 283www.recom-international.com