RP40-123.3SE_06 RECOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
Selection Guide 12V, 24V and 48V Input Types Part Number Input Output Output Input (4) Efficiency(5) Capacitive(6) Range Voltage Current Current Load max. VDC VDC mA mA % µF RP40-123.3SE 9-18 3.3 10000 3530 85 25800 RP40-1205SE 9-18 5 8000 4170 87 13600 RP40-1212SE 9-18 12 3400 4100 88 2400 RP40-1215SE 9-18 15 2700 4100 88 1550 RP40-243.3SE 18-36 3.3 10000 1720 84 25800 RP40-2405SE 18-36 5 8000 2010 87 13600 RP40-2412SE 18-36 12 3400 1980 90 2400 RP40-2415SE 18-36 15 2700 2000 88 1550 RP40-483.3SE 36-75 3.3 10000 850 85 25800 RP40-4805SE 36-75 5 8000 980 89 13600 RP40-4812SE 36-75 12 3400 1000 89 2400 RP40-4815SE 36-75 15 2700 1000 88 1550 RP40-1205DE 9-18 ±5 +7000 / -1000 4330 81 12000 / 1700 RP40-1212DE 9-18 ±12 ±1800 4550 83 ±1200 RP40-1215DE 9-18 ±15 ±1400 4430 83 ±750 RP40-2405DE 18-36 ±5 +7000 / -1000 2130 82 12000 / 1700 RP40-2412DE 18-36 ±12 ±1800 2170 87 ±1200 RP40-2415DE 18-36 ±15 ±1400 2140 86 ±750 RP40-4805DE 36-75 ±5 +7000 / -1000 1060 84 12000 / 1700 RP40-4812DE 36-75 ±12 ±1800 1100 86 ±1200 RP40-4815DE 36-75 ±15 ±1400 1100 86 ±750 RP40-123.305DE 9-18 3.3 / 5 4000 / 4000 3730 78 10300 / 6800 RP40-243.305DE 18-36 3.3 / 5 4000 / 4000 1840 79 10300 / 6800 RP40-483.305DE 36-75 3.3 / 5 4000 / 4000 910 80 10300 / 6800 RP40-120512TE 9-18 5 / ±12 4000 / ±850 4490 79 6800 / ±590 RP40-120515TE 9-18 5 / ±15 4000 / ±680 4430 80 6800 / ±380 RP40-240512TE 18-36 5 / ±12 4000 / ±850 2180 81 6800 / ±590 RP40-240515TE 18-36 5 / ±15 4000 / ±680 2160 82 6800 / ±380 RP40-480512TE 36-75 5 / ±12 4000 / ±850 1060 83 6800 / ±590 RP40-480515TE 36-75 5 / ±15 4000 / ±680 1060 83 6800 / ±380 July-2006 www.recom-international.com270
Specifications (typical at nominal input and 25°C unless otherwise noted) Input Voltage Range 12V nominal input 9-18VDC 24V nominal input 18-36VDC 48V nominal input 36-75VDC Input Filter Pi Type Input Surge Voltage (100 ms max.) 12V Input 36VDC 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple (nominal Vin and full load) (see Note 3) 40mAp-p Start Up Time (nominal Vin and constant resistor load) 25ms typ. Remote ON/OFF (see Note 7) DC-DC ON Open or 3.5V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V Remote OFF input current Nominal input 30mA Output Power 40W max. Output Voltage Accuracy (full Load and nominal Vin) Single & Dual ±2% Triple 3.3V, 5V ±2% Auxiliary ±5% continued on next page Derating-Graph (Ambient Temperature) POWERLINE DC/DC-Converter RP40-S_D_TE Series /MT49/MT50/MT53 /MT55/MT53 /MT53/MT48 /MT50/MT53 /MT48 /MT49/MT48/MT48 /MT65/MT109/MT98/MT105/MT101/MT110/MT116/MT32/MT84/MT101/MT109/MT112/MT101/MT114/MT97/MT116/MT117/MT114/MT101/MT32/MT82/MT97/MT110/MT103/MT101/MT32/MT40/MT176/MT67/MT41 /MT45/MT50/MT53/MT45/MT49/MT48 /MT48 /MT53/MT48 /MT54/MT48 /MT56/MT48 /MT57/MT48 /MT49/MT48/MT48 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT80/MT111/MT119/MT101/MT114/MT32/MT40/MT37/MT41 /MT78/MT97/MT116/MT117/MT114/MT97/MT108/MT32/MT67/MT111/MT110/MT118/MT101/MT99/MT116/MT105/MT111/MT110 /MT45/MT52/MT48 /MT55/MT48 /MT53/MT53/MT176/MT67 RP40-4805SE /MT57/MT49 /MT56/MT51 /MT56/MT50 /MT56/MT48 /MT73/MT110/MT112/MT117/MT116/MT32/MT86/MT111/MT108/MT116/MT97/MT103/MT101/MT32/MT40/MT86/MT41 /MT51/MT54 /MT69/MT102/MT102/MT105/MT99/MT105/MT101/MT110/MT99/MT121/MT32/MT40/MT37/MT41 /MT56/MT52 /MT56/MT53 /MT56/MT54 /MT56/MT55 /MT56/MT56 /MT56/MT57 /MT57/MT48 /MT56/MT49 /MT52/MT48 /MT53/MT53 /MT54/MT53/MT52/MT53 /MT53/MT48 /MT55/MT48/MT54/MT48 /MT55/MT53 /MT69/MT102/MT102/MT105/MT99/MT105/MT101/MT110/MT99/MT121/MT32/MT86/MT83/MT32/MT73/MT110/MT112/MT117/MT116/MT32/MT86/MT111/MT108/MT116/MT97/MT103/MT101 /MT57/MT49 /MT55/MT48 /MT54/MT48 /MT52/MT53 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT76/MT111/MT97/MT100/MT32/MT40/MT65/MT41 /MT48/MT44/MT53 /MT69/MT102/MT102/MT105/MT99/MT105/MT101/MT110/MT99/MT121/MT32/MT40/MT37/MT41 /MT56/MT48 /MT56/MT50 /MT56/MT52 /MT56/MT54 /MT56/MT56 /MT56/MT57 /MT57/MT48 /MT53/MT48 /MT49/MT53 /MT56/MT51/MT52 /MT54/MT55/MT50 /MT69/MT102/MT102/MT105/MT99/MT105/MT101/MT110/MT99/MT121/MT32/MT86/MT83/MT32/MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT76/MT111/MT97/MT100 RP40-4805SE RP40-4805SE Typical Characteristics Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at info@recom-development.at July-2006 271www.recom-international.com
Specifications (typical at nominal input and 25°C unless otherwise noted) POWERLINE DC/DC-Converter RP40-S_D_TE Series Voltage Adjustability ±10% Minimum Load (see Note 1) RP40-xx3.305DE 20% min. others 10% of full load Line Regulation (low line, high line at full load) Single ±0.5% Dual ±1% Triple 3.3V, 5V ±2% Auxiliary ±5% Load Regulation (25% to 100% full load) Single ±0.5% Dual ±1% Triple 3.3V, 5V ±2% Auxiliary ±5% Cross Regulation (see Note 8) Dual ±1% Triple 3.3V, 5V ±1% Auxiliary ±5% Ripple and Noise (20MHz bandwith) 1%/p-p of Vout max. Temperature Coefficient ±0.02%/°C max. Transient Response (25% load step change) 500µs Over Voltage Protection 3.3V 3.9V Zener diode clamp (only single) 5V 6.2V 12V 15V 15V 18V Short Circuit Protection Hiccup, automatic recovery Efficiency see „Selection Guide“ table Isolation Voltage 1600VDC min. Isolation Resistance 1 GΩ min. Isolation Capacitance 500pF max. Operating Frequency 185kHz typ. Operating Temperature Range -40°C to +85°C(with derating) Maximum Case Temperature +100°C Storage Temperature Range -55°C to +105°C Thermal Impedance Natural convection 7.3°C/Watt Thermal Shock MIL-STD-810D Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel plated copper Base Material Non-conductive black plastic FR4 Potting Material Epoxy (UL94-V0) Conducted Emissions (see Note 9) EN55022 Level A Radiated Emissions EN55022 Level A ESD EN61000-4-2 Perf. Criteria 2 Radiated Immunity EN61000-4-3 Perf. Criteria 2 Fast Transient EN61000-4-4 Perf. Criteria 2 Surge EN61000-4-5 Perf. Criteria 2 Conducted Immunity EN61000-4-6 Perf. Criteria 2 Weight 48g Dimensions 76.2 x 66.0 x 10.2mm MTBF (see Note 2) 1315 x 103 hours July-2006 www.recom-international.com272
Notes : POWERLINE DC/DC-Converter RP40-S_D_TE Series Package Style and Pinning (mm) /MT53 /MT50 /MT51 /MT49 /MT55 /MT54/MT51/MT46/MT53/MT48 /MT100/MT105/MT97/MT46 /MT49/MT46/MT48 /MT56/MT46/MT48/MT48 /MT55/MT46/MT54 /MT49/MT53/MT46/MT50/MT48 /MT54 /MT56 /MT57 /MT49/MT48 /MT52 /MT49/MT48/MT46/MT50/MT48 /MT49/MT55/MT46/MT56/MT48 /MT49/MT48/MT46/MT50/MT48 /MT49/MT48/MT46/MT50/MT48 /MT55/MT46/MT54/MT48 /MT55/MT46/MT54/MT48 /MT49/MT48/MT46/MT50/MT48 /MT49/MT50/MT46/MT55/MT48 /MT49/MT48/MT46/MT50/MT48 /MT49/MT48/MT46/MT50/MT48 /MT55/MT54/MT46/MT50/MT48 /MT54/MT54/MT46/MT48/MT48 /MT66/MT111/MT116/MT116/MT111/MT109/MT32/MT86/MT105/MT101/MT119 /MT51/MT114/MT100/MT32/MT97/MT110/MT103/MT108/MT101 /MT112/MT114/MT111/MT106/MT101/MT99/MT116/MT105/MT111/MT110 Pin Pitch Tolerance ±0.35 mm Pin Connections Pin # Single Dual Triple 3.3V / 5V
1 CTRL CTRL CTRL CTRL
4 SYNC SYNC SYNC SYNC
5 Trim Down +Vout +Aux 3.3V
6 Trim Com Com (Aux) Com
7 Trim Up -Vout -Aux +5V
8 +Vout Trim +Vout(Primary) Trim 9 -Vout NC Com(Primary) NC
10 No Pin NC Trim NC
NC = No Connection 1. The RP40 series required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condit ion will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. The ON/OFF control pin voltage is referenced to negative input 8. Cross regulation: Dual output—Asymmetrical load 25% to 100% full load Triple output – 3.3V / 5V 100% load and one of auxiliary 100% load, other auxiliary load change from 25% to 100% load 9. See application notes for EMI-filtering. July-2006 273www.recom-international.com
/MT67/MT111/MT110/MT118/MT101/MT114/MT116/MT101/MT114/MT32/MT50 /MT67/MT111/MT110/MT118/MT101/MT114/MT116/MT101/MT114/MT32/MT49 /MT83/MT121/MT110/MT99 /MT43 /MT150 /MT83/MT121/MT110/MT99 /MT43 /MT150 /MT67/MT76/MT75 /MT50 /MT52 /MT51 /MT50 /MT52 /MT51 /MT43/MT32/MT86/MT105/MT110 /MT150/MT32/MT86/MT105/MT110 /MT50/MT78/MT55/MT48/MT48/MT48 /MT50/MT48/MT37 /MT67/MT76/MT75/MT32/MT83/MT105/MT103/MT110/MT97/MT108 /MT56/MT48/MT37 /MT67/MT111/MT110/MT118/MT101/MT114/MT116/MT101/MT114 /MT67/MT84/MT82/MT76 /MT43 /MT150 /MT79/MT78/MT47/MT79/MT70/MT70 /MT67/MT111/MT110/MT116/MT114/MT111/MT108 /MT50 /MT49 /MT51 /MT43/MT32/MT86/MT105/MT110 /MT150/MT32/MT86/MT105/MT110 1. The unit is capable of external synchronization from an independent time base with a switching rate between 200kHz and 215 kHz. 2. The amplitude of the synchronizing pulse train is TTL compatible. 3. The duty cycle of the CLK should be 20% high and 80% low. 4. Synchronization is referenced to negative input (–Vin). /MT84/MT114/MT105/MT109/MT32/MT85/MT112 /MT82/MT85 /MT84/MT114/MT105/MT109/MT32/MT68/MT111/MT119/MT110 /MT82/MT68 /MT55/MT40/MT55/MT41/MT32/MT32/MT91/MT57/MT93/MT32/MT123/MT54/MT125 /MT54/MT40/MT56/MT41/MT32/MT32/MT91/MT49/MT48/MT93/MT32/MT123/MT56/MT125 /MT53/MT40/MT53/MT41/MT32/MT32/MT91/MT56/MT93/MT32/MT123/MT53/MT125 /MT54/MT40/MT56/MT41/MT32/MT32/MT91/MT49/MT48/MT93/MT32/MT123/MT56/MT125 External Output Trimming Output can be externally trimmed by using the method shown below. ( ) for dual output trim [ ] for triple output trim { } for RP40-xx3.305DE only trim 3.3V / 5V Application of Synchronization POWERLINE DC/DC-Converter RP40-S_D_TE Series July-2006 www.recom-international.com274