RP30-2418SEW RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Part Number Input Output Output Input Current Efficiency Max. Range Voltage Current (see note 5) (see note 6) Capacitive Load (VDC) (VDC) (mA) (mA) (%) (µF) RP30-241.8SEW 10-40 1.8 8000 789 80 65000 RP30-242.5SEW 10-40 2.5 8000 1068 82 33000 RP30-243.3SEW 10-40 3.3 6000 1006 86 19500 RP30-2405SEW 10-40 5 6000 1506 87 10200 RP30-2412SEW 10-40 12 2500 1506 87 3300 RP30-2415SEW 10-40 15 2000 1488 88 1100 RP30-481.8SEW 18-75 1.8 8000 390 81 65000 RP30-482.5EW 18-75 2.5 8000 527 83 33000 RP30-483.3SEW 18-75 3.3 6000 497 87 19500 RP30-4805SEW 18-75 5 6000 744 88 10200 RP30-4812SEW 18-75 12 2500 753 87 3300 RP30-4815SEW 18-75 15 2000 744 88 1100 Selection Guide 1.8V, 2.5V, 3.3V, 5V, 12V and 15V Input Types 125 100 Ambient Temperature Range (°C) -40 -25 -10 0 50 60 70 80 90 100 Output Power (%) Natural Convection 125 100 Ambient Temperature Range (°C) -40 -25 -10 0 50 60 70 80 90 100 Output Power (%) Natural Convection Derating Curve without Heat-Sink Derating Curve with Heat-Sink Input Voltage (V) Efficiency (%) 15 35 4020 25 30 Output Load (A) Efficiency (%) 25 6 34 Efficiency vs Input Voltage Trim Up Trim Down External Output Trimming Efficiency vs Output Load

www.recom-international.com PO 61August 2002 Specifications (typical at nominal input and 25°C unless otherwise noted) Output Power 30W max. Voltage Accuracy (full Load and nominal Vin) ±1% Voltage Adjustability ±1 0 % Minimum Load 0% Line Regulation (LL-HL at FL) ±0.5% Load Regulation (10% to 100% FL) ±0.5% Ripple and Noise, 20MHz BW (measured with a 104pF/50V MLCC) 75mVp-p Temperature Coefficient ±0.02%/°C max. Transient Response Recovery Time (25% load step change) 300µsec Over Voltage Protection (zener diode clamp): 1.8V Output 3.0V 2.5V Output 3.6V 3.3V Output 3.9V 5V Output 6.2V 12V Output 15V 15V Output 18V Over Load Protection (0% of full load at nominal Vin) 150% typ. Short Circuit Protection Hiccup, Automatic Recovery Input Voltage Range 24V types nominal input 10-40VDC 48V types nominal input 18-75VDC Under Voltage Lockout 24V Input DC-DC ON 10VDC DC-DC OFF 8VDC 48V Input DC-DC ON 18VDC DC-DC OFF 16VDC Input Filter L-C Type Input Surge Voltage 24V Input 50VDC 100 ms max. 48V Input 100VDC Input Reflected Ripple (see note 1) Nominal Vin and full load 150mAp-p Start Up Time (nominal Vin and constant resistor load) 25ms Remote ON/OFF (see note 2) (Positive logic) DC-DC ON Open or 3.5V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V Remote off Input Current Nominal Vin 3mA Isolation Voltage 1600VDC Isolation Resistance 109 Ω Isolation Capacitance 1000pF Switching Frequency 300kHz Designed to Meet Safety Standard UL 1950, EN60950 Case Material Nickel-Coated Copper Base Material Non-conducted Black Plastic Potting Material Epoxy (UL94-V0) Weight 48g (1.69 oz) Dimensions 50.8 x 40.6 x 10.2 mm MTBF (see note 3) 1.315 x 106 Hours Operating Temperature Range -40°C to +85°C (with derating) continued on next page POWERLINE - DC/DC-Converter EW-Ser. 30W, 1.6 kV Isolation, 4:1 Wide Input Range (Single Output)

PO 62 www.recom-international.comAugust 2002 Pin Connections Pin # Single 1 +Vin 2 –Vin

4 Ctrl

5 No Pin

7– V out 8T r i m Pin Pitch Tolerance ±0.35 mm Package Style and Pinning (mm) 10.20 dia. 1.0 5.6 50.10 5.10 15.20 17.80 40.60 45.70 12.70 10.20 17.80 10.20 876 Bottom View Specifications continued (typical at nominal input and 25°C unless otherwise noted) Maximum Case Temperature +100°C Storage Temperature Range -55°C to +105°C Thermal Impedance (see note 4) Natural convection 10°C/Watt Natural convection with heat-sink 8.24°C/Watt Thermal Shock MIL-STD-810D Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Conducted Emissions EN55022 Level A Radiated Emissions EN55022 Level A Conducted Immunity EN61000-4-6 Perf. Criteria 2 Radiated Immunity EN61000-4-3 Perf. Criteria 2 Surge EN61000-4-5 Perf. Criteria 2 Fast Transient EN61000-4-4 Perf. Criteria 2 ESD Air EN61000-4-2 Perf. Criteria 2 Notes: 1. Simulated source impedance of 12uH, 12uH inductor in series with +Vin. 2. The ON/OFF control function. There is positiv logic (standard) and negative logic (option). The pin voltage is referenced to negative input. To order negative logic ON-OFF control add the suffix ‘N’ (Ex: RP30-2405SEWN) 3. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 4. Heat sink is optional and P/N: 7G-0011A. 5. Maximum value at nominal input voltage and full load. 6. Typical value at nominal input voltage and full load. POWERLINE - DC/DC-Converter EW-Ser. 30W, 1.6 kV Isolation, 4:1 Wide Input Range (Single Output)