RP30-E RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Features

  • 2:1 Wide Input Voltage Range
  • 1.6kVDC Isolation
  • UL Certified
  • Efficiency up to 90%
  • Six-Sided Continuous Shield
  • Available as Power Module (RPM30-E) PD-1REV.: 1/2016www.recom-power.com DC/DC Converter

3 YEAR

Description

The RP30-E series DC/DC converters are certified to UL 60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2” x 1.6” package meets military standards for thermal shock and vibration tolerance E196683

30 Watt

Single & Dual Output RP30-E Selection Guide Part Number Input Output Output Input(1) Efficiency (1) Max. Capacitive Voltage Range Voltage Current Current typ. Load(2) [VDC] [VDC] [mA] [mA] [%] [µF] RP30-123.3SE(3,4) 9-18 3.3 6000 1941 85 19500 RP30-1205SE(3,4) 9-18 5 6000 2874 87 10200 RP30-1212SE(3,4) 9-18 12 2500 2841 88 3240 RP30-1215SE(3,4) 9-18 15 2000 2841 88 1100 RP30-243.3SE(3,4) 18-36 3.3 6000 959 86 19500 RP30-2405SE(3,4) 18-36 5 6000 1420 88 10200 RP30-2412SE(3,4) 18-36 12 2500 1404 89 3240 RP30-2415SE(3,4) 18-36 15 2000 1404 89 1100 RP30-483.3SE(3,4) 36-75 3.3 6000 474 87 19500 RP30-4805SE(3,4) 36-75 5 6000 702 89 10200 RP30-4812SE(3,4) 36-75 12 2500 694 90 3240 RP30-4815SE(3,4) 36-75 15 2000 694 90 1100 RP30-1212DE(3,4) 9-18 ±12 ±1250 2874 87 ±1020 RP30-1215DE(3,4) 9-18 ±15 ±1000 2874 87 ±675 RP30-2412DE(3,4) 18-36 ±12 ±1250 1420 88 ±1020 RP30-2415DE(3,4) 18-36 ±15 ±1000 1420 88 ±675 RP30-4812DE(3,4) 36-75 ±12 ±1250 710 88 ±1020 RP30-4815DE(3,4) 36-75 ±15 ±1000 710 88 ±675 UL60950-1 CertifiedModel Numbering Ordering Examples RP30-2405SE = 24V Input, 5V Output, Positive Logic CTRL pin. RP30-4812DE-HC = 48V Input, ±12V Output, Positive Logic CTRL pin, Heat-sink fitted Input Voltage Output Voltage Single or Dual Package(4) Control Logic(3) Notes: Note3: no suffix for CTRL function with Positive Logic (1=ON, 0=OFF) Note4: add suffix -HC for premounted Heat-sink and clips Notes: Note1: Maximum value at nominal input voltage and full load of standard type. Note2: Test by minimum Vin and constant resistor load.

PD-2 REV.: 1/2016 www.recom-power.com DC/DC Converter RP30-E Series BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range nom. Vin= 12V nom. Vin= 24V nom. Vin= 48V 9VDC 18VDC 36VDC 12VDC 24VDC 48VDC 18VDC 36VDC 75VDC Under Voltage Lockout (UVLO) Vin = 12V DC-DC ON DC-DC OFF 8VDC 9VDC Vin = 24V DC-DC ON DC-DC OFF 16VDC 17.8VDC Vin = 48V DC-DC ON DC-DC OFF 33VDC 36VDC Input Filter(5) L-C Type Input Reflected Ripple Current(6) nominal Vin and full load 30mAp-p Input Surge Voltage Vin= 12V, 100ms max. Vin= 24V, 100ms max. Vin= 48V, 100ms max. 36VDC 50VDC 100VDC Start-up time Power up Remote ON/OFF 25ms 25ms Operating Frequency Range 270kHz 300kHz 330kHz Minimum Load 0% Ripple and Noise measured by 20MHz bandwidth with a 0.1µF/50V MLCC 3.3Vout, 5Vout 12Vout, 15Vout 50mVp-p 75mVp-p Dual all 100mVp-p Remote ON/OFF(7) Positive Logic DC-DC ON DC-DC OFF Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V Input current of Remote pin (CTRL) DC-DC OFF 2.5mA DC-DC ON -0.5mA 0.5mA continued on next page Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted Notes: Note5: An external filter capacitor is required for normal operation. The capacitor should be capable of handling 1A ripple current for 48V/24V models. RECOM suggest: Nippon chemi-con KY series, 220µF/100V, ESR 90m Ω. Note6: Simulated source impedance of 12µH. 12µH inductor in series with +Vin. Note7: The ON/OFF control pin voltage is referenced to -Vin pin Efficiency vs. Output Current Efficiency vs. Input Voltage 9Vin 12Vin 18Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 Efficiency [%] Input Voltage [VDC] 11 12 14 171610 13 15 18 RP30-1205SE

Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted REGULATIONS Parameter Condition Value Output Voltage Accuracy ±1% Voltage Adjustability ±10% Line Voltage Regulation low line to high line at full load Single Dual ±0.2% ±0.5% Load Voltage Regulation no load to full load Single Dual ±0.5% ±1.0% Cross Regulation asymmetrical 25%<>100% load ±5% Transient Response recovery time 25% load step change 300µs typ. continued on next page RP30-E Series PD-3REV.: 1/2016www.recom-power.com Efficiency vs. Output Current Efficiency vs. Output Current Efficiency vs. Input Voltage Efficiency vs. Input Voltage 18Vin 24Vin 36Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 36Vin 48Vin 75Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 Efficiency [%] Input Voltage [VDC] 22 24 28 3432 3620 26 30 Efficiency [%] Input Voltage [VDC] 44 48 56 6864 7540 52 60 72 RP30-2405SE RP30-4805SE

PD-4 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP30-E Series External Output Trimming Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % RP30-xx3.3SE Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % RP30-xx05SE RP30-xx12SE RP30-xx15SE Output Voltage Trimming Single output Powerline converters offer the feature of trimming the output voltage over a certain range around the nominal value by using external trim resistors. No general equation can be given for calculating the trim resistors, but the following trimtables give typical values for chosing these trimming resistors. If voltages between the given trim points are required, extrapolate between the two nearest given values to work out the resis tor required or use a variable resistor to set the output voltage. Output can be externally trimmed by using the method shown below. RU 7(7) 8(8) RD 8(8) 6(5) Trim up Trim down

Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP30-E Series PD-5REV.: 1/2016www.recom-power.com Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % RP30-xx12DE RP30-xx15DE Dual Output Voltage Trim Tables PROTECTIONS Parameter Condition Value Short Circuit Protection (SCP) Continuous, automatic recovery Over Voltage Protection (OVP) Zener Diode Clamp 3.3Vout 5Vout 12Vout 15Vout 3.9VDC 6.2VDC 15VDC 18VDC Over Load Protection (OLP) % of Iout rated 150% typ. Over Temperature Protection (OTP) 115°C typ. Isolation Voltage I/P to O/P I/P to O/P to case 1.6kVDC/ 1 minute 1.6kVDC/ 1 minute Isolation Resistance 500VDC 1GΩ min. Isolation Capacitance 1000pF max. Notes: Note8: This power module is not internally fused. An input line fuse must always be used. ENVIRONMENTAL Parameter Condition Value Operating Temperature Range without derating with derating -40°C to +70°C -40°C to +100°C Maximum Case Temperature +100°C Temperature Coefficient ±0.02%/°C max. Thermal Impedance Natural convection (20LFM) Natural convection (20LFM) with Heat Sink 10°C/Watt 8.24°C/Watt Operating Humidity 5% - 95% RH Thermal Shock MIL-STD-810F Vibration MIL-STD-810F MTBF MIL-HDBK-217F Bellcore TR-NWT-000332(10) 1283 x 103 hours 1535 x 103 hours continued on next page

PD-6 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP30-E Series SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard UL General Safety E196683 UL60950-1 1st. Ed.: 2003 C22.2 No. 60950 1st. Ed.: 2003 EMC Compliance Condition Standard / Criterion EMI Standard(12) with external filter EN55022, Class A, Class B ESD Radiated Immunity Fast Transient(13) Surge(13) Conducted Immunity Air ±8kV and Contact ±6kC

10 V/m

±2kV ±1kV 10 Vr.m.s EN61000-4-2, Criteria B EN61000-4-3, Criteria A EN61000-4-4, Criteria B EN61000-4-5, Criteria B EN61000-4-6, Criteria A continued on next page Input Input DC DC Fuse Fuse C2C1 +VIN +VOUT -VOUT -VIN LOAD DC DC +VIN +VOUT COM -VOUT -VIN LOADLOAD Input Input DC DC Fuse Fuse C2C1 +VIN +VOUT -VOUT -VIN LOAD DC DC +VIN +VOUT COM -VOUT -VIN LOADLOAD EMI Filtering Class A Derating Graph(11) Notes: Note10: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). Note11: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part- number not shown here please contact our technical support service at techsupportAT@recom-power.com -40 80 100 12040200-20 100 Ambient Temperature [°C] Output Power [%] 60 -40 60 80 100 12040200-20 100 Ambient Temperature [°C] Output Power [%] RP30-483.3SE RP30-483.3SE with Heat-sink Notes: Note10: The standard modues meet EMI Class A or Class B with external components, see filter suggestions below. Note11: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Recom suggests: Nippon chemi-con KY series, 220µF/100V

Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP30-E Series PD-7REV.: 1/2016www.recom-power.com MODEL C1 C2 C3/C4 RP30-12xxSE RP30-12xxDE 6.8µF/50V

1812 MLCC N/A 1000pF/2kV

1808 MLCC

6.8µF/50V 2.2µF/100V +VIN +VOUT -VOUT -VIN LOAD +VOUT COM -VOUT LOADLOAD DC DC +VIN +VOUT -VOUT -VIN Input Fuse C3C2C1 Input DC DC Fuse C3C2C1 +VIN +VOUT -VOUT -VIN LOAD +VOUT COM -VOUT LOADLOAD DC DC +VIN +VOUT -VOUT -VIN Input Fuse C3C2C1 EMI Filtering Class B MODEL C1 C2 C3 C4 C5/C6 L1 RP30-12xxSE 4.7µF/50V 1812 MLCC N/A 4.7µF/50V CMC: 450µH ref.: WE 7448227005 ref.: CMC-05 RP30-24xxSE 6.8µF/50V 1812 MLCC N/A 6.8µF/50V CMC: 450µH ref.: WE 7448227005 ref.: CMC-05 RP30-48xxSE 2.2µF/100V

1812 MLCC

2.2µF/100V 2.2µF/100V 2.2µF/100V CMC: 450µH ref.: WE 7448227005 ref.: CMC-05 DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Base Potting Nickel coated copper FR4 PCB Epoxy (UL94-V0) Package Dimensions (LxWxH) without Heat-sink with Heat-sink 50.8 x 40.6 x 10.2mm 56.8 x 40.6 x 17.0mm Package Weight without Heat-sink with Heat-sink 48g 65.78 continued on next page

PD-8 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP30-E Series Pin Connections Pin # Single Dual 1 +Vin +Vin 2 -Vin -Vin

4 CTRL CTRL

5 No Pin +Vout

8 Trim Trim

Pin Pitch Tolerance ±0.25mm Pin Dimension Tolerance ±0.1mm Tolerance: X.X ±0.5mm X.XX ±0.25mm Dimension Drawing (mm) Dimension Drawing (mm) with Heat-sink 5.60 17.0 10.2 ø1.00 56.8 37.25 50.00 5.85 1.40 1.60 1.40 Top View Heat-sink 40.6 40.6 5.60 50.8 10.2 Ø1.00 45.70 17.8015.20 5.10 10.2010.20 12.7017.80 Bottom View

Packaging Quantity without Heat-sink with Heat-sink Tube Tray 5pcs. 15pcs. Storage Temperature Range -55°C to +125°C Storage Humidity 5% - 95% RH The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP30-E Series PD-9REV.: 1/2016www.recom-power.com