RP30-F RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • 2:1 Wide Input Voltage Range
  • 1.6kVDC Isolation
  • UL Certified
  • Efficiency up to 91%
  • Six-Sided Continuous Shield
  • No Minimum Load Required PD-1REV.: 1/2016www.recom-power.com DC/DC Converter

3 YEAR

Description

The RP30-F series DC/DC converters are designed to meet to UL 60950-1 and to cUL60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2” x 1” package meets military standards for thermal shock and vibration tolerance. E196683 RP30-F Selection Guide Part Number Input Output Output Input(1) Efficiency (1) Max. Capacitive Voltage Range Voltage Current Current typ. Load(2) [VDC] [VDC] [mA] [mA] [%] [µF] RP30-123.3SF(3,4) 9-18 3.3 8000 2588 85 20000 RP30-1205SF(3,4) 9-18 5 6000 2874 87 14400 RP30-1212SF(3,4) 9-18 12 2500 2809 89 3000 RP30-1215SF(3,4) 9-18 15 2000 2809 89 2000 RP30-243.3SF(3,4) 18-36 3.3 8000 1264 87 20000 RP30-2405SF(3,4) 18-36 5 6000 1389 90 14400 RP30-2412SF(3,4) 18-36 12 2500 1374 91 3000 RP30-2415SF(3,4) 18-36 15 2000 1374 91 2000 RP30-483.3SF(3,4) 36-75 3.3 8000 632 87 20000 RP30-4805SF(3,4) 36-75 5 6000 694 90 14400 RP30-4812SF(3,4) 36-75 12 2500 687 91 3000 RP30-4815SF(3,4) 36-75 15 2000 687 91 2000 RP30-1205DF(3,4) 9-18 ±5 ±3000 2874 87 ±3000 RP30-1212DF(3,4) 9-18 ±12 ±1250 2874 87 ±2000 RP30-1215DF(3,4) 9-18 ±15 ±1000 2874 87 ±1300 RP30-2405DF(3,4) 18-36 ±5 ±3000 1389 90 ±3000 RP30-2412DF(3,4) 18-36 ±12 ±1250 1404 89 ±2000 RP30-2415DF(3,4) 18-36 ±15 ±1000 1389 90 ±1300 RP30-4805DF(3,4) 36-75 ±5 ±3000 694 90 ±3000 RP30-4812DF(3,4) 36-75 ±12 ±1250 710 88 ±2000 RP30-4815DF(3,4) 36-75 ±15 ±1000 702 89 ±1300 UL60950-1 CertifiedModel Numbering Ordering Examples RP30-2405SF = 24V Input, 5V Output, Positive Logic CTRL pin fitted RP30-4812DF/N-HC = 48V Input, ±12V Output, Negative Logic CTRL pin fitted, Heat-sink fitted Input Voltage Output Voltage Single or Dual Package(4) Control Logic(3) Notes: Note3: no suffix for CTRL function with Positive Logic (1=ON, 0=OFF) add “N” for CTRL function with Negative Logic (0=ON, 1=OFF) Note4: add suffix -HC for premounted Heat-sink and clips Notes: Note1: Typical value at nominal input voltage and full load. Note2: Test by minimum Vin and constant resistor load.

PD-2 REV.: 1/2016 www.recom-power.com DC/DC Converter RP30-F Series BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range nom. Vin = 12V nom. Vin = 24V nom. Vin = 48V 9VDC 18VDC 36VDC 12VDC 24VDC 48VDC 18VDC 36VDC 75VDC Under Voltage Lockout (UVLO) Vin = 12V DC-DC ON DC-DC OFF 8VDC 9VDC Vin = 24V DC-DC ON DC-DC OFF 16VDC 18VDC Vin = 48V DC-DC ON DC-DC OFF 32VDC 36VDC Input Filter Pi-Type Input Reflected Ripple Current(5) nominal Vin and full load 20mAp-p Input Surge Voltage Vin = 12V, 100ms max. Vin = 24V, 100ms max. Vin = 48V, 100ms max. 25VDC 50VDC 100VDC Start-up time Power up Remote ON/OFF 30ms 30ms Operating Frequency Range 387kHz 430kHz 473kHz Minimum Load 0% Ripple and Noise measured by 20Mhz bandwidth with a 1µF/50V MLCC 3.3Vout, 5Vout 12Vout, 15Vout 100mVp-p 150mVp-p Remote ON/OFF(6) Positive Logic DC-DC ON DC-DC OFF Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V Negative Logic DC-DC ON DC-DC OFF Short or 0V < Vr < 1.2V Open or 3.0V < Vr < 12V Input current of Remote pin (CTRL) DC-DC OFF 3mA DC-DC ON -0.5mA 0.5mA continued on next page Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted Notes: Note5: Simulated source impedance of 12µH. 12µH inductor in series with +Vin. Note6: The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin. Efficiency vs. Output Current Efficiency vs. Input Voltage 9Vin 12Vin 18Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 Efficiency [%] Input Voltage [VDC] 11 12 14 171610 13 15 18 RP30-1205SF

Output Voltage Accuracy ±1% Voltage Adjustability Single Output ±10% Line Voltage Regulation low line to high line at full load ±0.2% Load Voltage Regulation no load to full load Single Dual ±0.5% ±1.0% Cross Regulation asymmetrical 25%<>100% load ±5% Transient Response recovery time 25% load step change 250µs continued on next page DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP30-F Series PD-3REV.: 1/2016www.recom-power.com Efficiency vs. Output Current Efficiency vs. Output Current Efficiency vs. Input Voltage Efficiency vs. Input Voltage 18Vin 24Vin 36Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 36Vin 48Vin 75Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 Efficiency [%] Input Voltage [VDC] 22 24 28 3432 3620 26 30 Efficiency [%] Input Voltage [VDC] 44 48 56 6864 7540 52 60 72 RP30-2405SF RP30-4805SF External Output Trimming Output Voltage Trimming Single output Powerline converters offer the feature of trimming the output voltage over a certain range around the nominal value by using external trim resistors. No general equation can be given for calculating the trim resistors, but the following trimtables give typical values for chosing these trimming resistors. If voltages between the given trim points are required, extrapolate between the two nearest given values to work out the resis tor required or use a variable resistor to set the output voltage. Output can be externally trimmed by using the method shown below. RU RD Trim up Trim down

PD-4 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP30-F Series Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % RP30-xx3.3SF Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % RP30-xx05SF RP30-xx12SF RP30-xx15SF PROTECTIONS Parameter Condition Value Short Circuit Protection (SCP) Continuous, automatic recovery Over Voltage Protection (OVP) Zener Diode Clamp 3.3Vout 5Vout 12Vout 15Vout 3.9VDC 6.2VDC 15VDC 18VDC Over Load Protection (OLP) % of Iout rated 150% typ. Over Temperature Protection (OTP) 115°C typ. Isolation Voltage I/P to O/P I/P to O/P to case 1.6kVDC/1 minute 1.6kVDC/1 minute Isolation Resistance 500VDC 1GΩ min. Isolation Capacitance 1500pF max. Notes: Note8: This power module is not internally fused. An input line fuse must always be used.

Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP30-F Series PD-5REV.: 1/2016www.recom-power.com SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard UL General Safety E196683 UL60950-1 1st. Ed.: 2003 C22.2 No. 60950 1st. Ed.: 2003 EMC Compliance Condition Standard / Criterion EMI Standard(11) with external filter EN55022, Class A or B ESD Radiated Immunity Fast Transient(12) Surge(12) Conducted Immunity Air ±8kV and Contact ±6kC

10 V/m

±2kV ±1kV 10 Vr.m.s EN61000-4-2, Criteria A EN61000-4-3, Criteria A EN61000-4-4, Criteria A EN61000-4-5, Criteria A EN61000-4-6, Criteria A continued on next page ENVIRONMENTAL Parameter Condition Value Operating Temperature Range without derating with derating -40°C o +74°C -40°C to +97°C Maximum Case Temperature +105°C Temperature Coefficient ±0.02%/°C max. Thermal Impedance Natural convection (20LFM) Natural convection (20LFM) with Heat-sink 12°C/Watt 10°C/Watt Operating Humidity 5% - 95% RH Thermal Shock MIL-STD-810F Vibration MIL-STD-810F MTBF MIL-HDBK-217F Bellcore TR-NWT-000332(9) 1453 x 103 hours 3173 x 103 hours -40 80 100 12040200-20 100 Ambient Temperature [°C] Output Power [%] 60 -40 80 100 12040200-20 100 Ambient Temperature [°C] Output Power [%] Derating Graph(10) Notes: Note9: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment) MIL-HDBK-217F Notice2 @ TA= 25°C, Full load (Ground, Benign, controlled environment) Note10: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part- number not shown here please contact our technical support service at techsupportAT@recom-power.com RP30-2415SF RP30-2415SF with Heat-sink

PD-6 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP30-F Series Input Input DC DC Fuse Fuse +VIN +VOUT -VOUT -VIN LOAD DC DC +VIN +VOUT COM -VOUT -VIN LOADLOAD Input Input DC DC Fuse Fuse +VIN +VOUT -VOUT -VIN LOAD DC DC +VIN +VOUT COM -VOUT -VIN LOADLOAD EMI Filtering Class A MODEL C1 C2/C3/C4 RP30-12xxSF RP30-12xxDF 10µF/25V

1812 MLCC

1808 MLCC

4.7µF/50V 2.2µF/100V +VIN +VOUT -VOUT -VIN LOAD +VOUT COM -VOUT LOADLOAD L1 L1 Fuse C2C1 L1 L1 DC DC +VIN +VOUT -VOUT -VIN Input Input DC DC Fuse C2C1 +VIN +VOUT -VOUT -VIN LOAD +VOUT COM -VOUT LOADLOAD L1 L1 Fuse C2C1 L1 L1 DC DC +VIN +VOUT -VOUT -VIN Notes: Note12: The standard modues meet EMI Class A or Class B with external components, see filter suggestions below. Note13: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Recom suggests: 12VDC & 24VDC input Nippon chemi-con KY series, 330µF/50V 48VDC input Nippon chemi-con KY series, 220µF/100V

Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP30-F Series PD-7REV.: 1/2016www.recom-power.com DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Base Potting Nickel coated copper FR4 PCB Epoxy (UL94-V0) Package Dimensions (LxWxH) without Heat-sink with Heat-sink 50.8 x 25.4 x 10.2mm 56.8 x 25.4 x 16.8mm Package Weight without Heat-sink with Heat-sink 30.5g 41.39g Pin Connections Pin # Single Dual 1 +Vin +Vin 2 -Vin -Vin

3 CTRL CTRL

6 Trim -Vout

Pin Pitch Tolerance ±0.25 mm Pin Dimension Tolerance ±0.1mm Tolerance: X.X ±0.5mm X.XX ±0.25mm Dimension Drawing (mm) Dimension Drawing (mm) with Heat-sink Bottom View 50.8 10.2 Ø1.00 25.4 5.60 45.72 15.20 5.10 5.08 2.5410.20 12.70 10.2 Ø1.0 56.8 5.60 16.8 24.20 50.0 1.40 1.30 1.95 1.30 Top View Heat-sink 25.4 5.85 MODEL C1/C2/C3 C4/C5/C6 L1 L2 RP30-12xxSF RP30-12xxDF 10µF/25V CMC: 33.3µH ref.: WE 744842932 ref.: CMC-09 CMC: 55µH ref.: WE 744290560 ref.: CMC-10 RP30-24xxSF RP30-24xxDF 4.7µF/50V CMC: 33.3µH ref.: WE 744842932 ref.: CMC-09 CMC: 55µH ref.: WE 744290560 ref.: CMC-10 RP30-48xxSF RP30-48xxDF 2.2µF/100V CMC: 33.3µH ref.: WE 744842932 ref.: CMC-09 CMC: 55µH ref.: WE 744290560 ref.: CMC-10

PD-8 REV.: 0/2015 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP30-F Series PACKAGING INFORMATION Parameter Type Value Packaging Quantity without Heat-sink with Heat-sink Tube Tray 9pcs. 20pcs. Storage Temperature Range -55°C to +125°C Storage Humidity 5% - 95% RH The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.