RP20-F RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • 2:1 Wide Input Voltage Range
  • 1.6kVDC Isolation
  • UL Certified
  • Efficiency up to 89%
  • Six-Sided Continuous Shield
  • No Minimum Load PD-1REV.: 1/2016www.recom-power.com DC/DC Converter

3 YEAR

Description

The RP20-F series DC/DC converters are certified to UL 60950-1 and to cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2” x 1” package meets military standards for thermal shock and vibration tolerance. E196683

20 Watt

2“ x 1“ Single & Dual Output RP20-F Selection Guide Part Number Input Output Output Input(1) Efficiency (1) Max. Capacitive Voltage Range Voltage Current Current typ. Load(2) [VDC] [VDC] [mA] [mA] [%] [µF] RP20-123.3SF(3,4) 9-18 3.3 5000 1618 85 13000 RP20-1205SF(3,4) 9-18 5 4000 1916 87 6800 RP20-1212SF(3,4) 9-18 12 1670 1942 86 2200 RP20-1215SF(3,4) 9-18 15 1330 1933 86 755 RP20-243.3SF(3,4) 18-36 3.3 5000 799 86 13000 RP20-2405SF(3,4) 18-36 5 4000 936 89 6800 RP20-2412SF(3,4) 18-36 12 1670 960 87 2200 RP20-2415SF(3,4) 18-36 15 1330 955 87 755 RP20-483.3SF(3,4) 36-75 3.3 5000 395 87 13000 RP20-4805SF(3,4) 36-75 5 4000 468 89 6800 RP20-4812SF(3,4) 36-75 12 1670 474 88 2200 RP20-4815SF(3,4) 36-75 15 1330 477 87 755 RP20-1212DF(3,4) 9-18 ±12 ±833 1937 86 ±680 RP20-1215DF(3,4) 9-18 ±15 ±667 1938 86 ±450 RP20-2412DF(3,4) 18-36 ±12 ±833 957 87 ±680 RP20-2415DF(3,4) 18-36 ±15 ±667 947 88 ±450 RP20-4812DF(3,4) 36-75 ±12 ±833 473 88 ±680 RP20-4815DF(3,4) 36-75 ±15 ±667 473 88 ±450 UL60950-1 CertifiedModel Numbering Ordering Examples RP20-2405SF = 24V Input, 5V Output, Positive Logic CTRL pin fitted RP20-4812DF/N-HC = 48V Input, ±12V Output, Negative Logic CTRL pin fitted, Heat-sink fitted (no trim pin available with dual output) Input Voltage Output Voltage Single or Dual Package4) Control Logic(3) Notes: Note3: no suffix for CTRL function with Positive Logic (1=ON, 0=OFF), and trim pin add “N” for CTRL function with Negative Logic (0=ON, 1=OFF), and trim pin Note4: add suffix -HC for premounted Heat-sink and clips Notes: Note1: Maximum value at nominal input voltage and full load. Note2: Test by minimum Vin and constant resistor load.

PD-2 REV.: 1/2016 www.recom-power.com DC/DC Converter RP20-F Series BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range nom. Vin = 12V nom. Vin = 24V nom. Vin = 48V 9VDC 18VDC 36VDc 12VDC 24VDC 48VDC 18VDC 36VDC 75VDC Undervoltage Lockout (ULVO) none Input Filter(5) L-C Type Input Reflected Ripple Current(6) nominal Vin and full load 20mAp-p Input Surge Voltage Vin = 12V, 100ms max. Vin = 24V, 100ms max. Vin = 48V, 100ms max. 36VDC 50VDC 100VDC Start-up time Power up Remote ON/OFF 10ms 10ms Operating Frequency Range 450kHz 500kHz 550kHz Minimum Load(7) Single Dual ±10% Optional Output Trim ±10% Ripple and Noise measured by 20MHz bandwidth with a 0.1µF/50V MLCC Single 3.3Vout Single 5Vout, 12Vout, 15Vout 60mVp-p 75mVp-p Dual All 100mVp-p Remote ON/OFF(8) Positive Logic DC-DC ON DC-DC OFF Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V Negative Logic DC-DC ON DC-DC OFF Short or 0V < Vr < 1.2V Open or 3.0V < Vr < 12V Input current of Remote pin (CTRL) DC-DC OFF 2.5mA DC-DC ON -0.5mA 0.5mA continued on next page Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted Notes: Note5: An external filter capacitor is required for normal operation. The capacitor should be capable of handling 1A ripple current for 48V/24V models. RECOM suggest: Nippon chemi-con KY series, 220µF/100V, ESR 90m Ω. Note6: Simulated source impedance of 12µH. 12µH inductor in series with +Vin. Note7: The RP20-F series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. Note8: The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin. Efficiency vs. Output Current Efficiency vs. Input Voltage 9Vin 12Vin 18Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 Efficiency [%] Input Voltage [VDC] 11 12 14 16 1810 13 15 17 RP20-1205SF

Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted REGULATIONS Parameter Condition Value Output Voltage Accuracy full load and nominal Vin ±1% Voltage Adjustability Single ±10% Line Voltage Regulation low line to high line at full load ±0.2% Load Voltage Regulation no laod to full load ±0.5% Cross Regulation asymmetrical 25%<>100% load ±5% Transient Response recovery time 25% load step change 250µs continued on next page RP20-F Series PD-3REV.: 1/2016www.recom-power.com Efficiency vs. Output Current Efficiency vs. Output Current Efficiency vs. Input Voltage Efficiency vs. Input Voltage 18Vin 24Vin 36Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 36Vin 48Vin 75Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 Efficiency [%] Input Voltage [VDC] 22 24 28 32 3620 26 30 34 Efficiency [%] Input Voltage [VDC] 44 48 56 64 68 7540 52 60 72 RP20-2405SF RP20-4805SF External Output Trimming Output Voltage Trimming Single output Powerline converters offer the feature of trimming the output voltage over a certain range around the nominal value by using external trim resistors. No general equation can be given for calculating the trim resistors, but the following trimtables give typical values for chosing these trimming resistors. If voltages between the given trim points are required, extrapolate between the two nearest given values to work out the resis tor required or use a variable resistor to set the output voltage. Output can be externally trimmed by using the method shown below. RU RD Trim up Trim down

PD-4 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP20-F Series PROTECTIONS Parameter Condition Value Short Circuit Protection (SCP) continuous, automatic recovery Over Voltage Protection (OVP) Zener Diode Clamp 3.3Vout 5Vout 12Vout 15Vout 3.9VDC 6.2VDC 15VDC 18VDC Over Load Protection (OLP) % of Iout rated 150% typ. Isolation Voltage I/P to O/P I/P to O/P to case 1.6kVDC/1 minute 1.6kVDC/1 minute Isolation Resistance 500 VDC 1GΩ min. Isolation Capacitance 1000pF max. Notes: Note9: This power module is not internally fused. An input line fuse must always be used. Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % RP20-xx12SF RP20-xx15SF Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % RP20-xx05SF Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % RP20-xx3.3SF

Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP20-F Series PD-5REV.: 1/2016www.recom-power.com ENVIRONMENTAL Parameter Condition Value Operating Temperature Range without derating with derating -40°C to +70°C -40°C to +100°C Maximum Case Temperature +100°C Temperature Coefficient ±0.02%/°C max. Thermal Impedance Natural convection (20LFM) Natural convection (20LFM) with Heat-sink 12°C/Watt 10°C/Watt Operating Humidity 5% - 95% RH Thermal Shock MIL-STD-810F Vibration MIL-STD-810F MTBF MIL-HDBK-217F, full load BELLCORE TR-NWT-000332(10) 1583 x 103 hours 1791 x 10³ hours -40 60 80 100 12040200-20 100 Ambient Temperature [°C] Output Power [%] -40 60 80 100 12040200-20 100 Ambient Temperature [°C] Output Power [%] Derating Graph(11) Notes: Note10: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). Note11: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part- number not shown here please contact our technical support service at techsupportAT@recom-power.com RP20-4805SF RP20-4805SF with Heat-sink SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard UL General Safety E196683 UL60950-1 1st Ed.: 2003 C22.2 No. 60950 1st. Ed.: 2003 EMC Compliance Condition Standard / Criterion EMI Standard(12) with external filter EN55022, Class A or B ESD Radiated Immunity Fast Transient(13) Surge(13) Conducted Immunity Air ±8kV and Contact ±6kV

10 V/m

±2kV ±1kV 10 Vr.m.s EN61000-4-2, Criteria B EN61000-4-3, Criteria A EN61000-4-4, Criteria B EN61000-4-5, Criteria B EN61000-4-6, Criteria A continued on next page Notes: Note12: The standard modues meet EMI Class A or Class B with external components, see filter suggestions below. Note13: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Recom suggests: Nippon chemi-con KY series, 220µF/100V

PD-6 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP20-F Series Input Input DC DC Fuse C2C1 +VIN +VOUT -VOUT -VIN LOAD +VOUT COM -VOUT LOADLOAD DC DC Fuse C2C1 +VIN +VOUT -VOUT -VIN Input Input DC DC Fuse C2C1 +VIN +VOUT -VOUT -VIN LOAD +VOUT COM -VOUT LOADLOAD DC DC Fuse C2C1 +VIN +VOUT -VOUT -VIN EMI Filtering Class B MODEL C1 C2 C3/C4 L1 RP20-12xxSF RP20-12xxDF 3.3µF/50V

1812 MLCC

3.3µF/50V

1808 MLCC

CMC: 450µH ref.: WE 74482270005 ref.: CMC-05 RP20-24xxSF RP20-24xxDF 4.7µF/50V

1812 MLCC N/A 1000pF/2kV

CMC: 450µH ref.: WE 74482270005 ref.: CMC-05 RP20-48xxSF RP20-48xxDF 2.2µF/100V 2.2µF/100V CMC: 450µH ref.: WE 74482270005 ref.: CMC-05 Input Input DC DC Fuse +VIN +VOUT -VOUT -VIN LOAD DC DC Fuse +VIN +VOUT COM -VOUT -VIN LOADLOAD Input Input DC DC Fuse +VIN +VOUT -VOUT -VIN LOAD DC DC Fuse +VIN +VOUT COM -VOUT -VIN LOADLOAD EMI Filtering Class A MODEL C1 C2 C3 RP20-12xxSF RP20-12xxDF 4.7µF/50V 2.2µF/50V 2.2µF/100V

DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Base Potting Nickel coated copper Non-conductive black plastic Epoxy (UL94-V0) Package Dimensions (LxWxH) without Heat-sink with Heat-sink 50.8 x 25.4 x 10.2mm 56.8 x 25.4 x 16.8mm Package Weight without Heat-sink with Heat-sink 27g 37.89g DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP20-F Series PD-7REV.: 1/2016www.recom-power.com Pin Connections Pin # Single Dual 1 +Vin +Vin 2 -Vin -Vin 3 +Vout +Vout

4 Trim Com

6 CTRL CTRL

Pin Pitch Tolerance ±0.25 mm Pin dimension tolerance ±0.1mm Tolerance: X.X ±0.5mm X.XX ±0.25mm Dimension Drawing (mm) Bottom View 10.2 50.8 20.3015.20 25.4 5.6 5.10 2.5 15.20 20.32 5.08 10.1610.16 12.70 ø1.0 10.2 16.8 20.30 56.8 15.20 25.4 5.6 5.10 2.5 ø1.0 24.20 50.00 5.85 1.40 1.30 1.95 1.30 Top View Heat-sink Dimension Drawing (mm) with Heat-sink

PD-8 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP20-F Series The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. PACKAGING INFORMATION Parameter Type Value Packaging Quantity without Heat-sink with Heat-sink Tube Tray 9pcs. 20pcs. Storage Temperature Range -55°C to +125°C Storage Humidity 5% - 95% RH