RP15-123.3SF_06 RECOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Selection Guide 12V, 24V and 48V Input Types Part Number Input Output Output Input (4) Efficiency(5) Capacitive(6) Range Voltage Current Current Load max. VDC VDC mA mA % µF RP15-123.3SF 9-18 3.3 4000 1467 79 10200 RP15-1205SF 9-18 5 3000 1603 82 7050 RP15-1212SF 9-18 12 1250 1524 86 1035 RP15-1215SF 9-18 15 1000 1524 86 705 RP15-243.3SF 18-36 3.3 4000 724 80 10200 RP15-2405SF 18-36 5 3000 781 84 7050 RP15-2412SF 18-36 12 1250 772 85 1035 RP15-2415SF 18-36 15 1000 772 85 705 RP15-483.3SF 36-75 3.3 4000 357 81 10200 RP15-4805SF 36-75 5 3000 396 83 7050 RP15-4812SF 36-75 12 1250 377 87 1035 RP15-4815SF 36-75 15 1000 381 86 705 RP15-1205DF 9-18 ±5 ±1500 1582 83 ±1020 RP15-1212DF 9-18 ±12 ±625 1524 86 ±495 RP15-1215DF 9-18 ±15 ±500 1563 84 ±165 RP15-2405DF 18-36 ±5 ±1500 781 84 ±1020 RP15-2412DF 18-36 ±12 ±625 762 86 ±495 RP15-2415DF 18-36 ±15 ±500 762 86 ±165 RP15-4805DF 36-75 ±5 ±1500 386 85 ±1020 RP15-4812DF 36-75 ±12 ±625 372 88 ±495 RP15-4815DF 36-75 ±15 ±500 377 87 ±165 * add /PP for CTRL function with Positive Logic (1=ON, 0=OFF) * add /NN for CTRL function with Negative Logic (0=ON, 1=OFF)
Description
The F-Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them ideal for all Telecom and safety applications where approved isolation is required. They also meet UL 1950 and CSA 950 standards. UL-60950-1 Certified July-2006 www.recom-international.com240
Derating-Graph (Ambient Temperature) POWERLINE DC/DC-Converter RP15-S_DF Series /MT49/MT50/MT53 /MT55/MT53 /MT53/MT48 /MT50/MT53 /MT48 /MT49/MT48/MT48 /MT65/MT109/MT98/MT105/MT101/MT110/MT116/MT32/MT84/MT101/MT109/MT112/MT101/MT114/MT97/MT116/MT117/MT114/MT101/MT32/MT82/MT97/MT110/MT103/MT101/MT32/MT40/MT176/MT67/MT41 /MT45/MT50/MT53/MT45/MT49/MT48 /MT48 /MT53/MT48/MT54/MT48/MT55/MT48 /MT56/MT48 /MT57/MT48 /MT49/MT48/MT48 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT80/MT111/MT119/MT101/MT114/MT32/MT40/MT37/MT41 /MT78/MT97/MT116/MT117/MT114/MT97/MT108/MT32/MT67/MT111/MT110/MT118/MT101/MT99/MT116/MT105/MT111/MT110 /MT45/MT52/MT48 /MT49/MT50/MT53 /MT55/MT53 /MT53/MT48 /MT50/MT53 /MT48 /MT49/MT48/MT48 /MT65/MT109/MT98/MT105/MT101/MT110/MT116/MT32/MT84/MT101/MT109/MT112/MT101/MT114/MT97/MT116/MT117/MT114/MT101/MT32/MT82/MT97/MT110/MT103/MT101/MT32/MT40/MT176/MT67/MT41 /MT45/MT50/MT53/MT45/MT49/MT48 /MT48 /MT53/MT48 /MT54/MT48/MT55/MT48/MT56/MT48 /MT57/MT48 /MT49/MT48/MT48 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT80/MT111/MT119/MT101/MT114/MT32/MT40/MT37/MT41 /MT78/MT97/MT116/MT117/MT114/MT97/MT108/MT32/MT67/MT111/MT110/MT118/MT101/MT99/MT116/MT105/MT111/MT110 /MT45/MT52/MT48 RP15-4805SF RP15-4805SF With Heat Sink /MT52/MT53/MT51/MT54 /MT54/MT48 /MT69/MT102/MT102/MT105/MT99/MT105/MT101/MT110/MT99/MT121/MT32/MT32/MT86/MT83/MT32/MT73/MT110/MT112/MT117/MT116/MT32/MT86/MT111/MT108/MT116/MT97/MT103/MT101 /MT53/MT48/MT53/MT53/MT52/MT48 /MT54/MT53/MT55/MT48/MT55/MT53 /MT55/MT51 /MT55/MT52 /MT55/MT53 /MT55/MT54 /MT55/MT55 /MT55/MT56 /MT55/MT57 /MT56/MT48 /MT56/MT49 /MT56/MT50 /MT56/MT51 /MT69/MT102/MT102/MT105/MT99/MT105/MT101/MT110/MT99/MT121/MT32/MT40/MT37/MT41 /MT73/MT110/MT112/MT117/MT116/MT32/MT86/MT111/MT108/MT116/MT97/MT103/MT101/MT32/MT40/MT86/MT41 /MT49/MT48/MT46/MT53 /MT50 /MT69/MT102/MT102/MT105/MT99/MT105/MT101/MT110/MT99/MT121/MT32/MT32/MT86/MT83/MT32/MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT108/MT111/MT97/MT100 /MT49/MT46/MT53 /MT50/MT46/MT53/MT51 /MT53/MT48 /MT54/MT53 /MT55/MT48 /MT55/MT54 /MT55/MT55 /MT55/MT56 /MT55/MT57 /MT56/MT48 /MT56/MT49 /MT56/MT50 /MT56/MT51 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT76/MT111/MT97/MT100/MT32/MT40/MT65/MT41 /MT69/MT102/MT102/MT105/MT99/MT105/MT101/MT110/MT99/MT121/MT32/MT40/MT37/MT41 RP15-4805SF RP15-4805SF Typical Characteristics Input Voltage Range 12V nominal input 9-18VDC 24V nominal input 18-36VDC 48V nominal input 36-75VDC Input Filter Pi Type Input Surge Voltage (100 ms max.) 12V Input 36VDC 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple (nominal Vin and full load) (see Note 3) 20mAp-p Start Up Time (nominal Vin and constant resistor load) 20ms typ. Remote ON/OFF (Optional. See Note 7) (Positive logic) DC-DC ON Open or 3.5V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V (Negative logic) DC-DC ON Short or 0V < Vr < 1.2V DC-DC OFF Open or 3.5V < Vr < 12V Remote OFF input current Nominal input 20mA Output Power 15W max. continued on next page Specifications (typical at nominal input and 25°C unless otherwise noted) Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at info@recom-development.at July-2006 241www.recom-international.com
Specifications (typical at nominal input and 25°C unless otherwise noted) POWERLINE DC/DC-Converter RP15-S_DF Series Output Voltage Accuracy (full Load and nominal Vin) ±1% Minimum Load (see Note 1) 10% of full load Line Regulation (low line, high line at full load) ±1% Load Regulation (25% to 100% full load) Single ±1% Dual ±2% Cross Regulation (asymmetrical load 25%/100% full load) ±5% Ripple and Noise (20MHz bandwith) Single 50mVp-p Dual 75mVp-p Temperature Coefficient ±0.02%/°C max. Transient Response (25% load step change) 500µs Over Voltage Protection 3.3V 3.9V Zener diode clamp (only single) 5V 6.2V 12V 15V 15V 18V Over Load Protection (% of full load at nominal Vin) 150% typ Short Circuit Protection Hiccup, automatic recovery Efficiency see „Selection Guide“ table Isolation Voltage 1600VDC min. Isolation Resistance 1 GΩ min. Isolation Capacitance 300pF max. Operating Frequency Single 500kHz typ. Dual 300kHz typ. Approved to Safety Standards UL 1950, EN60950 Operating Temperature Range -40°C to +85°C(with derating) Maximum Case Temperature +100°C Storage Temperature Range -55°C to +105°C Thermal Impedance Natural convection 12°C/Watt (see Note 8) Natural convection with Heat Sink 10°C/Watt Thermal Shock MIL-STD-810D Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel plated copper Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) Conducted Emissions (see Note 9) EN55022 Level A Radiated Emissions EN55022 Level A ESD EN61000-4-2 Perf. Criteria 2 Radiated Immunity EN61000-4-3 Perf. Criteria 2 Fast Transient EN61000-4-4 Perf. Criteria 2 Surge EN61000-4-5 Perf. Criteria 2 Conducted Immunity EN61000-4-6 Perf. Criteria 2 continued on next page July-2006 www.recom-international.com242
Specifications (typical at nominal input and 25°C unless otherwise noted) POWERLINE DC/DC-Converter RP15-S_DF Series Weight 27g Dimensions 50.8 x 25.4 x 10.2mm MTBF (see Note 2) 2041 x 103 hours 1. The RP15 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input. Positive logic ON/OFF is marked with suffix-P (eg. RP15-2405SF/P) Negative logic ON/OFF is marked with suffix-N (eg. RP15-2405SF/N). If no suffix is specified, the control pin will be omitted. 8. Heat sink is optional and P/N: 7G-0020A. 9. See application notes for EMI-filtering. Notes : Package Style and Pinning (mm) /MT51 /MT49 /MT50 /MT53 /MT52 /MT50/MT48/MT46/MT51/MT48 /MT53/MT48/MT46/MT56/MT48 /MT100/MT105/MT97/MT46 /MT49/MT46/MT48 /MT49/MT48/MT46/MT50/MT48 /MT49/MT48/MT46/MT50/MT48 /MT49/MT50/MT46/MT55/MT48 /MT49/MT53/MT46/MT50/MT48 /MT66/MT111/MT116/MT116/MT111/MT109/MT32/MT86/MT105/MT101/MT119 /MT54 /MT50/MT46/MT53/MT48 /MT53/MT46/MT49/MT48 /MT50/MT53/MT46/MT52/MT48 /MT53/MT46/MT54 /MT49/MT48/MT46/MT50/MT48 /MT51/MT114/MT100/MT32/MT97/MT110/MT103/MT108/MT101 /MT112/MT114/MT111/MT106/MT101/MT99/MT116/MT105/MT111/MT110 Pin Pitch Tolerance ±0.35 mm Pin Connections Pin # Single Dual 1 +Vin +Vin 2 -Vin -Vin 3 +Vout +Vout
4 No Pin Com
6* CTRL* CTRL* * Optional. See Note 7. July-2006 243www.recom-international.com