RP12-122.5SA_07 RECOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Selection Guide 5V, 12V, 24V and 48V Input Types Part Number Input Output Output Input (4) Efficiency(5) Capacitive(6) Range Voltage Current Current Load max. DIP24 (SMD) VDC VDC mA mA % µF RP12-122.5SA 9-18 2.5 3500 1687 82 2000 RP12-123.3SA 9-18 3.3 3500 1646 84 2000 RP12-1205SA 9-18 5 2400 1606 86 2000 RP12-1212SA 9-18 12 1000 1606 86 430 RP12-1215SA 9-18 15 800 1606 86 300 RP12-242.5SA 18-36 2.5 3500 843 83 2000 RP12-243.3SA 18-36 3.3 3500 823 85 2000 RP12-2405SA 18-36 5 2400 803 87 2000 RP12-2412SA 18-36 12 1000 803 87 430 RP12-2415SA 18-36 15 800 803 87 300 RP12-482.5SA 36-75 2.5 3500 422 83 2000 RP12-483.3SA 36-75 3.3 3500 411 85 2000 RP12-4805SA 36-75 5 2400 401 87 2000 RP12-4812SA 36-75 12 1000 401 87 430 RP12-4815SA 36-75 15 800 401 87 300 RP12-1205DA 9-18 ±5 ±1200 1687 82 ±1250 RP12-1212DA 9-18 ±12 ±500 1626 87 ±200 RP12-1215DA 9-18 ±15 ±400 1626 87 ±120 RP12-2405DA 18-36 ±5 ±1200 843 83 ±1250 RP12-2412DA 18-36 ±12 ±500 813 88 ±200 RP12-2415DA 18-36 ±15 ±400 813 88 ±120 RP12-4805DA 36-75 ±5 ±1200 422 83 ±1250 RP12-4812DA 36-75 ±12 ±500 406 88 ±200 RP12-4815DA 36-75 ±15 ±400 406 88 ±120 ** add Suffix SMD for SMD package UL-60950-1 Certified 14-February-2007 229www.recom-international.com
DC/DC-Converter RP12-S_DA Series /MT49/MT50/MT53 /MT55/MT53 /MT53/MT48 /MT50/MT53 /MT48 /MT49/MT48/MT48 /MT65/MT109/MT98/MT105/MT101/MT110/MT116/MT32/MT84/MT101/MT109/MT112/MT101/MT114/MT97/MT116/MT117/MT114/MT101/MT32/MT82/MT97/MT110/MT103/MT101/MT32/MT40/MT176/MT67/MT41 /MT45/MT52/MT48 /MT45/MT49/MT48 /MT48 /MT53/MT48 /MT54/MT48 /MT55/MT48 /MT56/MT48 /MT57/MT48 /MT49/MT48/MT48 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT80/MT111/MT119/MT101/MT114/MT32/MT40/MT37/MT41 /MT54/MT51 /MT78/MT97/MT116/MT117/MT114/MT97/MT108/MT32/MT67/MT111/MT110/MT118/MT101/MT99/MT116/MT105/MT111/MT110 /MT45/MT50/MT53 RP12-4805SA Input Voltage Range 12V nominal input 9-18VDC 24V nominal input 18-36VDC 48V nominal input 36-75VDC Under Voltage Lockout 12V Input DC-DC ON 9VDC DC-DC OFF 8VDC 24V Input DC-DC ON 18VDC DC-DC OFF 16VDC 48V Input DC-DC ON 36VDC DC-DC OFF 33VDC Input Filter Pi Type Input Voltage Variation dv/dt (Complies with ETS300 132 part 4.4) 5V/ms max. Input Surge Voltage (100 ms max.) 12V Input 36VDC 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple (nominal Vin and full load) (see Note 3) 20mAp-p Start Up Time (nominal Vin and constant resistor load) 600ms typ. Remote ON/OFF (see Note 7) DC-DC ON Open or 3.0V < Vr < 12V DC-DC OFF Short or 0V < Vr < 1.2V Remote OFF input curren Nominal input 2.5mA Output Power 12W max. Output Voltage Accuracy (full Load and nominal Vin) ±1.2% Minimum Load (see Note 1) 10% of full load continued on next page Specifications (typical at nominal input and 25°C unless otherwise noted) Derating-Graph (Ambient Temperature) Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at info@recom-development.at 14-February-2007 www.recom-international.com230
Specifications (typical at nominal input and 25°C unless otherwise noted) POWERLINE DC/DC-Converter RP12-S_DA Series Line Regulation (low line, high line at full load) Single ±0.2% Dual ±0.5% Load Regulation (25% to 100% full load) Single ±0.5% Dual ±1% (only 2.5Vout) ±1.5% Cross Regulation (asymmetrical load 25%/100% full load) ±5% Ripple and Noise (20MHz bandwith) 85mVp-p Temperature Coefficient ±0.02%/°C max. Transient Response (25% load step change) 300µs Over Voltage Protection 2.5V 3.9V Zener diode clamp (only single) 3.3V 3.9V 5V 6.2V 12V 15V 15V 18V Over Load Protection (% of full load at nominal Vin) 150% typ Short Circuit Protection Continuous, automatic recovery Efficiency see „Selection Guide“ table Isolation Voltage In to out 1600VDC min. I/O to case 1600VDC min. Isolation Resistance 1 GΩ min. Isolation Capacitance 1200pF max. Operating Frequency 400kHz typ. Operating Temperature Range -40°C to +85°C(with derating) Maximum Case Temperature +100°C Storage Temperature Range -55°C to +105°C Thermal Impedance Natural convection 20°C/Watt Thermal Shock MIL-STD-810D Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel plated copper Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) Conducted Emissions (see Note 8) EN55022 Class A Radiated Emissions EN55022 Class A ESD EN61000-4-2 Perf. Criteria 2 Radiated Immunity EN61000-4-3 Perf. Criteria 2 Fast Transient EN61000-4-4 Perf. Criteria 2 Surge EN61000-4-5 Perf. Criteria 2 Conducted Immunity EN61000-4-6 Perf. Criteria 2 Weight DIP 18g SMD 20g Dimensions 31.8 x 20.3 x 10.2mm MTBF (see Note 2) 2750 x 103 hours 14-February-2007 231www.recom-international.com
Notes : Package Style and Pinning (mm) /MT53/MT46/MT49/MT48 /MT50/MT48/MT46/MT51/MT48 /MT50 /MT49/MT48/MT46/MT50/MT48 /MT48/MT46/MT50/MT53/MT32/MT120/MT32/MT48/MT46/MT53/MT48 /MT82/MT101/MT99/MT116/MT97/MT110/MT103/MT117/MT108/MT97/MT114/MT32/MT80/MT105/MT110 /MT49/MT53/MT46/MT50/MT48 /MT66/MT111/MT116/MT116/MT111/MT109/MT32/MT86/MT105/MT101/MT119 /MT49/MT32/MT32/MT32/MT50/MT32/MT32/MT32/MT51 /MT50/MT48/MT46/MT51/MT48/MT51/MT49/MT46/MT56/MT48 /MT32/MT57/MT32/MT32/MT32/MT32/MT32/MT49/MT49 /MT49/MT54/MT32/MT32/MT32/MT32/MT32/MT49/MT52/MT50/MT51/MT32/MT50/MT50 /MT51/MT46/MT56 /MT50/MT46/MT53/MT52 POWERLINE DC/DC-Converter /MT51/MT114/MT100/MT32/MT97/MT110/MT103/MT108/MT101 /MT112/MT114/MT111/MT106/MT101/MT99/MT116/MT105/MT111/MT110 RP12-S_DA Series 1. The RP12 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. The ON/OFF control pin voltage is referenced to negative input. 8. See application notes for EMI-filtering. Pin Pitch Tolerance ±0.35 mm Pin Connections Pin # Single Dual
1 ON/OFF ON/OFF
9 NC Com
11 NC -Vout
NC = No Connection 14-February-2007 www.recom-international.com232 /MT50/MT48/MT46/MT51/MT48 /MT32/MT57/MT49/MT48/MT49/MT49/MT49/MT50 /MT50/MT52/MT50/MT51/MT50/MT50 /MT49/MT54/MT49/MT53/MT49/MT52/MT49/MT51/MT50/MT49/MT50/MT48 /MT49 /MT51/MT50/MT53/MT52 /MT49 /MT51/MT49/MT46/MT52/MT48 /MT50/MT53/MT46/MT52/MT48 /MT49/MT48/MT46/MT57/MT48 /MT66/MT111/MT116/MT116/MT111/MT109/MT32/MT86/MT105/MT101/MT119 /MT49/MT49/MT32/MT120/MT32/MT50/MT46/MT53/MT52 /MT80/MT105/MT110/MT32/MT97/MT114/MT101/MT97 /MT48/MT46/MT49/MT32/MT120/MT32/MT48/MT46/MT53/MT48/MT48/MT46/MT53/MT48 /MT51/MT50/MT46/MT48/MT48 /MT49/MT49/MT46/MT50/MT48 /MT50/MT46/MT53/MT52 /MT50/MT52/MT46/MT49/MT52 /MT50/MT55/MT46/MT57/MT52 /MT50/MT54/MT46/MT53/MT52 /MT49/MT46/MT54/MT48 /MT50/MT46/MT52/MT48 /MT84/MT111/MT112/MT32/MT86/MT105/MT101/MT119 /MT50/MT49/MT46/MT51/MT48/MT51/MT46/MT56/MT49/MT54/MT46/MT51/MT53 /MT50/MT46/MT53/MT52 /MT50/MT51/MT46/MT52/MT48 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. Pin Pitch Tolerance ±0.35 mm Pin Connections Pin # Single Dual NC = No Connection