RP110X NISSHINBO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 36

Technical content

150mA Low Supply Current LDO REGULATOR No. EA-239-230822 OUTLINE The RP110x Series is a voltage regulator (LDO ) IC, which has been developed using the CMOS process technology, with high output voltage accuracy, ultra-low supply current, and low ON-resistance transistor. The IC contains the following components: a voltage reference unit, an error amplifier, a resistor -net for output voltage setting, a current limit circuit for preventing short-circuit, a soft-start circuit, and a chip enable circuit. By minimizing the supply current to 1µA, the IC is able to prolong the battery life of each system. The external capacitor is 0.1µF with phase compensation. The IC also has a constant slope circuit as a soft-start circuit, which does not require any external capacitor. It minimizes the inrush current and prevents the output voltage overshoot at the start-up. In addition to the small packaged SOT -23-5 and SC -88A, the RP110x Series offers the ultra- small DFN(PL)0808-4 package and DFN1010-4, which enables the high density mounting of LDO regulator.

FEATURES

(Except the current through CE pull down circuit)

  • Temperature-Drift Coefficient of Output Voltage ... Typ. ±100ppm/°C SC-88A, SOT-23-5 (For other voltages, please refer to MARK INFORMATIONS.)
  • Built-in Constant Slope Circuit

APPLICATIONS

  • Power source for portable communication equipment.
  • Power source for electrical appliances such as cameras, VCRs and camcorders.
  • Power source for battery-powered equipment.

No. EA-239-230822 BLOCK DIAGRAMS RP110xxxxB RP110xxxxC VDD GND VOUT CE Vref Current Limit VDD GND VOUT Vref Current Limit NC RP110xxxxD VDD GND VOUT CE Vref Current Limit

No. EA-239-230822 SELECTION GUIDE The output voltage, chip enable circuit, auto discharge function, package for the ICs can be selected at the user’s request. Product Name Package Quantity per Reel Pb Free Halogen Free RP110Kxx1∗-TR DFN(PL)0808-4 10,000 pcs Yes Yes RP110Lxx1∗-TR DFN1010-4 10,000 pcs Yes Yes RP110Qxx2∗-TR-FE SC-88A 3,000 pcs Yes Yes RP110Nxx1∗-TR-FE SOT-23-5 3,000 pcs Yes Yes xx: Output voltage (VOUT) is selectable from 0.8V to 3.6V in 0.1V increments. The second decimal point is described as below. Ex.1.25V: RP110x12xx5 2.85V: RP110x28xx5 ∗: Selections of CE pin and Auto-discharge function are as shown below. B: CE “H” active, Auto-discharge function: No C: CE is unavailable, Auto-discharge function: No D: CE “H” active, Auto-discharge function: Yes

No. EA-239-230822 PIN CONFIGURATIONS

  • DFN(PL)0808-4 • DFN1010-4 Top View 2 1 3 4 Bottom View 1 2 4 3 Top View 2 1 3 4 Bottom View 1 2 4 3
  • SC-88A • SOT-23-5 5 4 3 2 (mark side) 1 2 3 4 5 (mark side) PIN DESCRIPTIONS
  • DFN(PL)0808-4 Pin No Symbol Pin Description

1 VOUT Output Pin

2 GND Ground Pin

3 CE / NC Chip Enable Pin ("H" Active) / No connection

4 VDD Input Pin

∗) Tab is GND level. (They are connected to the reverse side of this IC.) The tab is better to be connected to the GND, but leaving it open is also acceptable.

  • DFN1010-4 Pin No. Symbol Description

∗) Tab is GND level. (They are connected to the reverse side of this IC.) The tab is better to be connected to the GND, but leaving it open is also acceptable.

No. EA-239-230822

  • SC-88A Pin No. Symbol Description

1 CE / NC Chip Enable Pin ("H" Active) / No connection

2 ∗ NC No connection

3 GND Ground Pin

4 VOUT Output Pin

5 VDD Input Pin

∗) Pin No. 2 is connected to the bottom of the IC. It is recommended that the pin be connected to the ground plane on the board, or otherwise be left floating so that there is no contact with other potentials.

  • SOT-23-5 Pin No Symbol Pin Description

1 VDD Input Pin

4 NC No Connection

5 VOUT Output Pin

VIN Input Voltage 6.0 V VCE Input Voltage (CE Pin) 6.0 V VOUT Output Voltage −0.3 to VIN+0.3 V IOUT Output Current 180 mA PD Power Dissipation∗ DFN(PL)0808-4 Standard Land Pattern 286 mW DFN1010-4 JEDEC STD. 51 1000 SC-88A Standard Land Pattern 380 SOT-23-5 JEDEC STD. 51 660 Topt Operating Temperature Range −40 to 85 °C Tstg Storage Temperature Range −55 to 125 °C ∗) For Power Dissipation, please refer to PACKAGE INFORMATION. ABSOLUTE MAXIMUM RATINGS Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the permanent damages and may degrade the life time and safety for both device and system using the device in the field. The functional operation at or over these absolute maximum ratings is not assured.

No. EA-239-230822

ELECTRICAL CHARACTERISTICS

Unless otherwise noted, The specifications surrounded by are guaranteed by Design Engineering at - 40°C ≤ Ta ≤85°C. RP110xxxxx Ta=25°C Symbol Item Conditions Min. Typ. Max. Unit VOUT Output Voltage Ta = 25°C VOUT > 2.0V × 0.99 × 1.01 V VOUT ≤ 2.0V -20 20 mV -40°C ≤ Ta ≤ 85°C VOUT > 2.0V × 0.97 ×1.025 V VOUT ≤ 2.0V -60 50 mV IOUT Output Current 150 mA ∆VOUT /∆IOUT Load Regulation 1mA ≤ IOUT ≤ 150mA -20 0 20 mV VDIF Dropout Voltage Please refer to “Dropout Voltage”. ISS Supply Current IOUT = 0mA 1 2.0 μA Istandby Standby Current VCE =0V 0.1 1.0 μA ∆VOUT /∆VIN Line Regulation Set VOUT0.5V ≤ VIN ≤ 5.0V 0.02 0.10 %/V VIN Input Voltage * 1.4 5.25 V ∆VOUT /∆Ta Output Voltage Temperature Coefficient -40°C ≤ Ta ≤ 85°C ±100 ppm /°C ISC Short Current Limit VOUT = 0V 50 mA ICE CE Pull-down Current (Only applied to B/D versions) 0.3 μA VCEH CE input Voltage “H” (Only for B/D versions) 1.0 V VCEL CE Input Voltage ”L” (Only applied to B/D versions) 0.4 V RLOW LOW Output Nch ON Resistance (Only applied to D version) VIN = 4.0V, VCE = 0V 60 Ω All test categories were tested on the products under the pulse load condition (Tj ≈ Ta = 25ºC) except “Output Voltage Temperature Coefficient”. *) The maximum input voltage (electrical characteristics) is 5.25V. In case of exceeding this value, the maximum input voltage cannot be over 5.5V and the total operating time has to be within 500hrs.

No. EA-239-230822 The specifications surrounded by are guaranteed by Design Engineering at - 40°C ≤ Ta ≤85°C.

  • Dropout Voltage Ta=25°C Output Voltage VOUT (V) Dropout Voltage VDIF (V) Condition Typ. Max. 0.8 ≤ VOUT < 0.9 IOUT=150mA 0.96 1.40 0.9 ≤ VOUT < 1.0 0.87 1.25 1.0 ≤ VOUT < 1.2 0.78 1.15 1.2 ≤ VOUT < 1.4 0.64 1.00 1.4 ≤ VOUT < 1.7 0.52 0.80 1.7 ≤ VOUT < 2.0 0.40 0.60 2.0 ≤ VOUT < 2.5 0.32 0.48 2.5 ≤ VOUT < 3.0 0.28 0.40 3.0 ≤ VOUT ≤ 3.6 0.25 0.35 RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS) All of electronic equipment should be designed that the mounted semiconductor devices operate within the recommended operating conditions. The semiconductor devices cannot operate normally over the recommended operating conditions, even if when they are used over such conditions by momentary electronic noise or surge. And the semiconductor devices may receive serious damage when they continue to operate over the recommended operating conditions.

No. EA-239-230822 TYPICAL APPLICATION C1 RP110x Series VDD VOUT CE GND VOUT CE Control (External Components) C2 0.1µ F MURATA: GRM155B31 C104KA87B TECHNICAL NOTES When using these ICs, consider the following points: Phase Compensation In these ICs, phase compensation is made for securing stable operation even if the load current is varied. For this purpose, use a capacitor C2 with good frequency characteristics and ESR (Equivalent Series Resistance). (Note: If additional ceramic capacitors are connected with parallel to the output pin with an output capacitor for phase compensation, the operation might be unstable. Because of this, test these ICs with as same external components as ones to be used on the PCB.) PCB Layout Make V DD and GND lines sufficient. If their impedance is high, noise pickup or unstable operation may result. Connect a capacitor C1 with a capacitance value as much as 0.1µF or more between V DD and GND pin, and as close as possible to the pins. Set external components, especially the output capacitor C2, as close as possible to the ICs, and make wiring as short as possible.

No. EA-239-230822 CONSTANT SLOPE CIRCUITS The RP110x Series is equipped with a constant slope circuit as a soft-start circuit, which allows the output voltage to start up gradually when the CE is turned on. The constant slope circuit minimizes the inrush current at the start-up and also prevents the overshoot of the output voltage. The capacitor to create the start-up slope is built in the IC that does not require any external components. The start-up time and the start-up slope angle are fixed inside the IC. If the capacitance of the external output capacitor (COUT) becomes more than the certain capacitance, the output current limit circuit minimizes the incoming current of the output capacitor at the start -up. As a result, the start-up time becomes longer and the start-up slope angle becomes more gentle. As “Inrush Current Characteristics Example” below shows, if the COUT is less than 4.7µF, the constant slope circuit easily starts to function at the start-up, likewise, if the COUT is over 10µF, the output current limit circuit easily starts to function at the start-up. The boundary point of using these two circuits is inversely proportional to the output voltage. If the output voltage is higher, the output current limit circuit easily starts to function even if the COUT capacitance is small. For more details, please refer to the graph 14 of “Inrush Current Characteristics Example”. Inrush Current Characteristics Example (C1=none, IOUT=0mA, Topt=25ºC) RP110x25xB/D 50 150 250 3500 100 200 300 400 CE Input Voltage VCE / Output Voltage VOUT (V) Inrush Current IVDD (mA) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 150 100 250 200 350 300 Output Voltage CE Input Voltage Inrush Current VIN=3.5V COUT=0.1µF COUT=1.0µF COUT=2.2µF COUT=4.7µF COUT=10µF Time t (µs)

No. EA-239-230822

PACKAGE INFORMATION

  • Power Dissipation (DFN (PL) 0808-4) Power Dissipation (P D) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: Measurement Conditions: Standard Test Land Pattern Environment Mounting on Board (Wind velocity=0m/s) Board Material Glass cloth epoxy plastic (Double-sided) Board Dimensions 40mm × 40mm × 1.6mm Copper Ratio Top side: Approx. 50%, Back side: Approx. 50% Through-holes φ 0.5mm × 24pcs Measurement Results: (Ta=25 °C) Standard Test Land Pattern Power Dissipation 286mW (Tjmax=125°C) 358mW (Tjmax=150°C) Thermal Resistance θjc= 90°C/W Power Dissipation Measurement Board Pattern IC Mount Area (Unit: mm) The above graph shows the Power Dissipation of the package under the conditions of Tjmax=125°C and Tjmax=150°C. The operation of the IC within the shaded range in the graph might have an affect on the IC’s lifetime. The operation time of the IC must be remained within the time limit described in the table below. Operating Time Estimated Years (Operating four hours/day) 13,000 hours 9 years

No. EA-239-230822

  • Package Dimensions (DFN (PL) 0808-4)
  • Mark Specification (DFN (PL) 0808-4) : Product Code … Refer to “RP110K Series Mark Specification Table”. : Lot Number … Alphanumeric Serial Number   B INDEX 0.80 A 0.80 0.05 S 0.4max 0.05min 0.05 S 3 4 1 2 0.28±0.05 0.25 ±0.05 0.06±0.05 0.48 0.22±0.05 0.05 M S AB 0.25 ±0.05 45° C0.16 0.22±0.05 (Unit : mm) Bottom View *) Tab is GND level. (They are connected to the reverse side of this IC.) The tab is better to be connected to the GND, but leaving it open is also acceptable.

No. EA-239-230822

  • RP110K Series Mark Specification Table (DFN(PL)0808-4) RP110Kxx1B RP110Kxx1C RP110Kxx1D Product Name  VSET Product Name  VSET Product Name  VSET RP110K081B B 0.8V RP110K081C B 0.8V RP110K081D B 0.8V RP110K091B B 0.9V RP110K091C B 0.9V RP110K091D B 0.9V RP110K101B B 1.0V RP110K101C B 1.0V RP110K101D B 1.0V RP110K111B B 1.1V RP110K111C B 1.1V RP110K111D B 1.1V RP110K121B B 1.2V RP110K121C B 1.2V RP110K121D B 1.2V RP110K131B B 1.3V RP110K131C B 1.3V RP110K131D B 1.3V RP110K141B B 1.4V RP110K141C B 1.4V RP110K141D B 1.4V RP110K151B B 1.5V RP110K151C B 1.5V RP110K151D B 1.5V RP110K161B B 1.6V RP110K161C B 1.6V RP110K161D B 1.6V RP110K171B B 1.7V RP110K171C B 1.7V RP110K171D B 1.7V RP110K181B B 1.8V RP110K181C B 1.8V RP110K181D B 1.8V RP110K191B B 1.9V RP110K191C B 1.9V RP110K191D B 1.9V RP110K201B B 2.0V RP110K201C B 2.0V RP110K201D B 2.0V RP110K211B B 2.1V RP110K211C B 2.1V RP110K211D B 2.1V RP110K221B B 2.2V RP110K221C B 2.2V RP110K221D B 2.2V RP110K231B B 2.3V RP110K231C B 2.3V RP110K231D B 2.3V RP110K241B B 2.4V RP110K241C B 2.4V RP110K241D B 2.4V RP110K251B B 2.5V RP110K251C B 2.5V RP110K251D B 2.5V RP110K261B B 2.6V RP110K261C B 2.6V RP110K261D B 2.6V RP110K271B B 2.7V RP110K271C B 2.7V RP110K271D B 2.7V RP110K281B B 2.8V RP110K281C B 2.8V RP110K281D B 2.8V RP110K291B B 2.9V RP110K291C B 2.9V RP110K291D B 2.9V RP110K301B B 3.0V RP110K301C B 3.0V RP110K301D B 3.0V RP110K311B B 3.1V RP110K311C B 3.1V RP110K311D B 3.1V RP110K321B B 3.2V RP110K321C B 3.2V RP110K321D B 3.2V RP110K331B B 3.3V RP110K331C B 3.3V RP110K331D B 3.3V RP110K341B B 3.4V RP110K341C B 3.4V RP110K341D B 3.4V RP110K351B B 3.5V RP110K351C B 3.5V RP110K351D B 3.5V RP110K361B B 3.6V RP110K361C B 3.6V RP110K361D B 3.6V RP110K121B5 B 1.25V RP110K121C5 B 1.25V RP110K121D5 B 1.25V RP110K181B5 B 1.85V RP110K181C5 B 1.85V RP110K181D5 B 1.85V RP110K281B5 B 2.85V RP110K281C5 B 2.85V RP110K281D5 B 2.85V RP110K191B5 B 1.95V RP110K191C5 B 1.95V RP110K191D5 B 1.95V RP110K091B5 B 0.95V RP110K091C5 B 0.95V RP110K091D5 B 0.95V

No. EA-239-230822

  • Power Dissipation (DFN1010-4) The power dissipation of the package is dependent on PCB material, layout, and environmental conditions. The following measurement conditions are based on JEDEC STD. 51-7. Measurement Conditions Item Measurement Conditions Environment Mounting on Board (Wind Velocity = 0 m/s) Board Material Glass Cloth Epoxy Plastic (Four-Layer Board) Board Dimensions 76.2 mm × 114.3 mm × 0.8 mm Copper Ratio Outer Layer (First Layer): Less than 95% of 50 mm Square Inner Layers (Second and Third Layers): Approx. 100% of 50 mm Square Outer Layer (Fourth Layer): Approx. 100% of 50 mm Square Through-holes φ 0.2 mm × 21 pcs Measurement Result (Ta = 25°C, Tjmax = 125°C) Item Measurement Result Power Dissipation 1000 mW Thermal Resistance (θja) θja = 100°C/W Thermal Characterization Parameter (ψjt) ψjt = 41°C/W θja: Junction-to-Ambient Thermal Resistance ψjt: Junction-to-Top Thermal Characterization Parameter Power Dissipation vs. Ambient Temperature Measurement Board Pattern 200 400 600 800 1000 1200 0 25 50 75 100 125 Power Dissipation PD (mW) Ambient Temperature (°C)

No. EA-239-230822 1.00 1.00 A B 0.05 INDEX S 0.05 S 0.4max. 0.1-0.03 3 4 1 2 0.25±0.05 C0.12 0.48 ±0.05 0.65 4-C0.157 0.22±0.05 0.05 M AB 0.48 ±0.05 45° (Unit : mm) Bottom View +0.08 *) Tab is GND level. (They are connected to the reverse side of this IC.) The tab is better to be connected to the GND, but leaving it open is also acceptable.

  • Mark Specification (DFN1010-4) : Product Code …Refer to “RP110L Series Mark Specification Table” . : Lot Number … Alphanumeric Serial Number

No. EA-239-230822

  • RP110L Series Mark Specification Table (DFN1010-4) RP110Lxx1B RP110Lxx1C RP110Lxx1D Product Name  VSET Product Name  VSET Product Name  VSET RP110L081B 00 0.8V RP110L081C 32 0.8V RP110L081D 64 0.8V RP110L091B 01 0.9V RP110L091C 33 0.9V RP110L091D 65 0.9V RP110L101B 02 1.0V RP110L101C 34 1.0V RP110L101D 66 1.0V RP110L111B 03 1.1V RP110L111C 35 1.1V RP110L111D 67 1.1V RP110L121B 04 1.2V RP110L121C 36 1.2V RP110L121D 68 1.2V RP110L131B 06 1.3V RP110L131C 38 1.3V RP110L131D 70 1.3V RP110L141B 07 1.4V RP110L141C 39 1.4V RP110L141D 71 1.4V RP110L151B 08 1.5V RP110L151C 40 1.5V RP110L151D 72 1.5V RP110L161B 09 1.6V RP110L161C 41 1.6V RP110L161D 73 1.6V RP110L171B 10 1.7V RP110L171C 42 1.7V RP110L171D 74 1.7V RP110L181B 11 1.8V RP110L181C 43 1.8V RP110L181D 75 1.8V RP110L191B 13 1.9V RP110L191C 45 1.9V RP110L191D 77 1.9V RP110L201B 14 2.0V RP110L201C 46 2.0V RP110L201D 78 2.0V RP110L211B 15 2.1V RP110L211C 47 2.1V RP110L211D 79 2.1V RP110L221B 16 2.2V RP110L221C 48 2.2V RP110L221D 80 2.2V RP110L231B 17 2.3V RP110L231C 49 2.3V RP110L231D 81 2.3V RP110L241B 18 2.4V RP110L241C 50 2.4V RP110L241D 82 2.4V RP110L251B 19 2.5V RP110L251C 51 2.5V RP110L251D 83 2.5V RP110L261B 20 2.6V RP110L261C 52 2.6V RP110L261D 84 2.6V RP110L271B 21 2.7V RP110L271C 53 2.7V RP110L271D 85 2.7V RP110L281B 22 2.8V RP110L281C 54 2.8V RP110L281D 86 2.8V RP110L291B 24 2.9V RP110L291C 56 2.9V RP110L291D 88 2.9V RP110L301B 25 3.0V RP110L301C 57 3.0V RP110L301D 89 3.0V RP110L311B 26 3.1V RP110L311C 58 3.1V RP110L311D 90 3.1V RP110L321B 27 3.2V RP110L321C 59 3.2V RP110L321D 91 3.2V RP110L331B 28 3.3V RP110L331C 60 3.3V RP110L331D 92 3.3V RP110L341B 29 3.4V RP110L341C 61 3.4V RP110L341D 93 3.4V RP110L351B 30 3.5V RP110L351C 62 3.5V RP110L351D 94 3.5V RP110L361B 31 3.6V RP110L361C 63 3.6V RP110L361D 95 3.6V RP110L121B5 05 1.25V RP110L121C5 37 1.25V RP110L121D5 69 1.25V RP110L181B5 12 1.85V RP110L181C5 44 1.85V RP110L181D5 76 1.85V RP110L281B5 23 2.85V RP110L281C5 55 2.85V RP110L281D5 87 2.85V RP110L191B5 96 1.95V RP110L191C5 98 1.95V RP110L191D5 97 1.95V RP110L091B5 99 0.95V RP110L091C5 A0 0.95V RP110L091D5 A1 0.95V

No. EA-239-230822

  • Power Dissipation (SC-88A) Power Dissipation (P D) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: Measurement Conditions: Standard Land Pattern Environment Mounting on Board (Wind velocity=0m/s) Board Material Glass cloth epoxy plastic (Double Layers) Board Dimensions 40mm × 40mm × 1.6mm Copper Ratio Top side: Approx. 50%, Back side: Approx. 50% Through-hole φ0.5mm × 44pcs Measurement Results: (Ta=25 °C) Standard Land Pattern Free Air Power Dissipation 380mW (Tjmax=125°C) 475mW (Tjmax=150°C) 150mW Thermal Resistance θjc=75°C/W - Power Dissipation The above graph shows the Power Dissipation of the package under the conditions of Tjmax=125°C and Tjmax=150°C. The operation of the IC within the shaded range in the graph might have an affect on the IC’s lifetime. The operation time of the IC must be remained within the time limit described in the table below. Operating Time Estimated Years (Operating four hours/day) 13,000 hours 9 years

No. EA-239-230822

  • Package Dimensions (SC-88A) 2.0±0.2 1.3±0.2 1 2 3 +0.2 -0.1 1.25 2.1±0.3 0～0.1 Unit : mm 0.2 A 0.65 0.15±0.07 0～14° 0.15 0.36±0.1 +0.1 -0.05 B

0.10 S AB

0.10 S +0.1 -0.2 0.9 1.1Max. S

  • Mark Specification (SC-88A) : Product Code …Refer to “ RP110Q Series Mark Specification Table”. : Lot Number … Alphanumeric Serial Number   1 2 3

No. EA-239-230822

  • RP110Q Series Mark Specification Table (SC-88A) RP110Qxx2B RP110Qxx2C RP110Qxx2D Product Name  VSET Product Name  VSET Product Name  VSET RP110Q082B AN08 0.8V RP110Q082C AP08 0.8V RP110Q082D AQ08 0.8V RP110Q092B AN09 0.9V RP110Q092C AP09 0.9V RP110Q092D AQ09 0.9V RP110Q102B AN10 1.0V RP110Q102C AP10 1.0V RP110Q102D AQ10 1.0V RP110Q112B AN11 1.1V RP110Q112C AP11 1.1V RP110Q112D AQ11 1.1V RP110Q122B AN12 1.2V RP110Q122C AP12 1.2V RP110Q122D AQ12 1.2V RP110Q132B AN13 1.3V RP110Q132C AP13 1.3V RP110Q132D AQ13 1.3V RP110Q142B AN14 1.4V RP110Q142C AP14 1.4V RP110Q142D AQ14 1.4V RP110Q152B AN15 1.5V RP110Q152C AP15 1.5V RP110Q152D AQ15 1.5V RP110Q162B AN16 1.6V RP110Q162C AP16 1.6V RP110Q162D AQ16 1.6V RP110Q172B AN17 1.7V RP110Q172C AP17 1.7V RP110Q172D AQ17 1.7V RP110Q182B AN18 1.8V RP110Q182C AP18 1.8V RP110Q182D AQ18 1.8V RP110Q192B AN19 1.9V RP110Q192C AP19 1.9V RP110Q192D AQ19 1.9V RP110Q202B AN20 2.0V RP110Q202C AP20 2.0V RP110Q202D AQ20 2.0V RP110Q212B AN21 2.1V RP110Q212C AP21 2.1V RP110Q212D AQ21 2.1V RP110Q222B AN22 2.2V RP110Q222C AP22 2.2V RP110Q222D AQ22 2.2V RP110Q232B AN23 2.3V RP110Q232C AP23 2.3V RP110Q232D AQ23 2.3V RP110Q242B AN24 2.4V RP110Q242C AP24 2.4V RP110Q242D AQ24 2.4V RP110Q252B AN25 2.5V RP110Q252C AP25 2.5V RP110Q252D AQ25 2.5V RP110Q262B AN26 2.6V RP110Q262C AP26 2.6V RP110Q262D AQ26 2.6V RP110Q272B AN27 2.7V RP110Q272C AP27 2.7V RP110Q272D AQ27 2.7V RP110Q282B AN28 2.8V RP110Q282C AP28 2.8V RP110Q282D AQ28 2.8V RP110Q292B AN29 2.9V RP110Q292C AP29 2.9V RP110Q292D AQ29 2.9V RP110Q302B AN30 3.0V RP110Q302C AP30 3.0V RP110Q302D AQ30 3.0V RP110Q312B AN31 3.1V RP110Q312C AP31 3.1V RP110Q312D AQ31 3.1V RP110Q322B AN32 3.2V RP110Q322C AP32 3.2V RP110Q322D AQ32 3.2V RP110Q332B AN33 3.3V RP110Q332C AP33 3.3V RP110Q332D AQ33 3.3V RP110Q342B AN34 3.4V RP110Q342C AP34 3.4V RP110Q342D AQ34 3.4V RP110Q352B AN35 3.5V RP110Q352C AP35 3.5V RP110Q352D AQ35 3.5V RP110Q362B AN36 3.6V RP110Q362C AP36 3.6V RP110Q362D AQ36 3.6V RP110Q122B5 AN37 1.25V RP110Q122C5 AP37 1.25V RP110Q122D5 AQ37 1.25V RP110Q182B5 AN38 1.85V RP110Q182C5 AP38 1.85V RP110Q182D5 AQ38 1.85V RP110Q282B5 AN39 2.85V RP110Q282C5 AP39 2.85V RP110Q282D5 AQ39 2.85V RP110Q192B5 AN40 1.95V RP110Q192C5 AP40 1.95V RP110Q192D5 AQ40 1.95V RP110Q092B5 AN41 0.95V RP110Q092C5 AP41 0.95V RP110Q092D5 AQ41 0.95V

No. EA-239-230822

  • Power Dissipation (SOT-23-5) The power dissipation of the package is dependent on PCB material, layout, and environmental conditions. The following measurement conditions are based on JEDEC STD. 51-7. Measurement Conditions Item Measurement Conditions Environment Mounting on Board (Wind Velocity = 0 m/s) Board Material Glass Cloth Epoxy Plastic (Four-Layer Board) Board Dimensions 76.2 mm × 114.3 mm × 0.8 mm Copper Ratio Outer Layer (First Layer): Less than 95% of 50 mm Square Inner Layers (Second and Third Layers): Approx. 100% of 50 mm Square Outer Layer (Fourth Layer): Approx. 100% of 50 mm Square Through-holes φ 0.3 mm × 7 pcs Measurement Result (Ta = 25°C, Tjmax = 125°C) Item Measurement Result Power Dissipation 660 mW Thermal Resistance (θja) θja = 150°C/W Thermal Characterization Parameter (ψjt) ψjt = 51°C/W θja: Junction-to-Ambient Thermal Resistance ψjt: Junction-to-Top Thermal Characterization Parameter Power Dissipation vs. Ambient Temperature Measurement Board Pattern

No. EA-239-230822

  • Package Dimensions (SOT-23-5) 2.9±0.2 1.9±0.2 (0.95) (0.95) 5 4 1 2 3 1.6-0.1 +0.2 2.8±0.3 0.4±0.1 0.8±0.1 1.1±0.1 0～0.1 0.15-0.05 +0.1 Unit : mm 0.2min.
  • Mark Specification (SOT-23-5) : Product Code … Refer to “RP110N Series Mark Specification Table”. : Lot Number … Alphanumeric Serial Number 5 4 1 2 3

No. EA-239-230822

  • RP110N Series Mark Specification Table (SOT-23-5) RP110Nxx1B RP110Nxx1C RP110Nxx1D Product Name  VSET Product Name  VSET Product Name  VSET RP110N081B A08 0.8V RP110N081C B08 0.8V RP110N081D C08 0.8V RP110N091B A09 0.9V RP110N091C B09 0.9V RP110N091D C09 0.9V RP110N101B A10 1.0V RP110N101C B10 1.0V RP110N101D C10 1.0V RP110N111B A11 1.1V RP110N111C B11 1.1V RP110N111D C11 1.1V RP110N121B A12 1.2V RP110N121C B12 1.2V RP110N121D C12 1.2V RP110N131B A13 1.3V RP110N131C B13 1.3V RP110N131D C13 1.3V RP110N141B A14 1.4V RP110N141C B14 1.4V RP110N141D C14 1.4V RP110N151B A15 1.5V RP110N151C B15 1.5V RP110N151D C15 1.5V RP110N161B A16 1.6V RP110N161C B16 1.6V RP110N161D C16 1.6V RP110N171B A17 1.7V RP110N171C B17 1.7V RP110N171D C17 1.7V RP110N181B A18 1.8V RP110N181C B18 1.8V RP110N181D C18 1.8V RP110N191B A19 1.9V RP110N191C B19 1.9V RP110N191D C19 1.9V RP110N201B A20 2.0V RP110N201C B20 2.0V RP110N201D C20 2.0V RP110N211B A21 2.1V RP110N211C B21 2.1V RP110N211D C21 2.1V RP110N221B A22 2.2V RP110N221C B22 2.2V RP110N221D C22 2.2V RP110N231B A23 2.3V RP110N231C B23 2.3V RP110N231D C23 2.3V RP110N241B A24 2.4V RP110N241C B24 2.4V RP110N241D C24 2.4V RP110N251B A25 2.5V RP110N251C B25 2.5V RP110N251D C25 2.5V RP110N261B A26 2.6V RP110N261C B26 2.6V RP110N261D C26 2.6V RP110N271B A27 2.7V RP110N271C B27 2.7V RP110N271D C27 2.7V RP110N281B A28 2.8V RP110N281C B28 2.8V RP110N281D C28 2.8V RP110N291B A29 2.9V RP110N291C B29 2.9V RP110N291D C29 2.9V RP110N301B A30 3.0V RP110N301C B30 3.0V RP110N301D C30 3.0V RP110N311B A31 3.1V RP110N311C B31 3.1V RP110N311D C31 3.1V RP110N321B A32 3.2V RP110N321C B32 3.2V RP110N321D C32 3.2V RP110N331B A33 3.3V RP110N331C B33 3.3V RP110N331D C33 3.3V RP110N341B A34 3.4V RP110N341C B34 3.4V RP110N341D C34 3.4V RP110N351B A35 3.5V RP110N351C B35 3.5V RP110N351D C35 3.5V RP110N361B A36 3.6V RP110N361C B36 3.6V RP110N361D C36 3.6V RP110N121B5 A37 1.25V RP110N121C5 B37 1.25V RP110N121D5 C37 1.25V RP110N181B5 A38 1.85V RP110N181C5 B38 1.85V RP110N181D5 C38 1.85V RP110N281B5 A39 2.85V RP110N281C5 B39 2.85V RP110N281D5 C39 2.85V RP110N191B5 A40 1.95V RP110N191C5 B40 1.95V RP110N191D5 C40 1.95V RP110N091B5 A41 0.95V RP110N091C5 B41 0.95V RP110N091D5 C41 0.95V

No. EA-239-230822 TYPICAL CHARACTERISTICS 1) Output Voltage vs. Output Current (C1=Ceramic 0.1µF, C2=Ceramic 0.1µF, Topt=25°C) RP110x08xx RP110x25xx RP110x36xx 2) Output Voltage vs. Input Voltage (C1=Ceramic 0.1µF, C2=Ceramic 0.1µF, Topt=25°C) RP110x08xx RP110x25xx 0 100 200 400 Output Voltage VOUT (V) 0.6 0.8 1.0 0.4 0.1 0.2 0.7 0.9 0.5 0.3 Output Current IOUT (mA) 300 VIN=1.4V VIN=1.5V VIN=1.6V VIN=1.8V VIN=2.8V VIN=3.8V VIN=4.8V VIN=5.25V 0 100 200 400 Output Voltage VOUT (V) 1.0 2.0 3.0 1.5 2.5 0.5 Output Current IOUT (mA) 300 VIN=2.8V VIN=2.9V VIN=3.5V VIN=4.5V VIN=5.25V 0 100 200 400 Output Voltage VOUT (V) 1.0 2.0 4.0 1.5 3.0 2.5 3.5 0.5 Output Current IOUT (mA) 300 VIN=3.8V VIN=3.9V VIN=4.6V VIN=5.25V 0 1 2 3 4 5 Output Voltage VOUT (V) 0.2 0.4 1.0 0.3 0.6 0.5 0.8 0.7 0.9 0.1 Input Voltage VIN (V) IOUT=1mA IOUT=30mA IOUT=50mA 0 1 2 3 4 5 Output Voltage VOUT (V) 1.0 2.0 3.0 1.5 2.5 0.5 Input Voltage VIN (V) IOUT=1mA IOUT=30mA IOUT=50mA

No. EA-239-230822 RP110x36xx 3) Supply Current vs. Input Voltage (C1=Ceramic 0.1µF, C2=Ceramic 0.1µF, Topt=25°C) RP110x08xx RP110x25xx RP110x36xx 0 1 2 3 4 5 Output Voltage VOUT (V) 1.0 2.0 4.0 1.5 3.0 2.5 3.5 0.5 Input Voltage VIN (V) IOUT=1mA IOUT=30mA IOUT=50mA 0 1 2 3 4 5 0.4 0.8 1.4 1.2 0.6 1.0 0.2 Input Voltage VIN (V) Supply Current ISS (µA) 0 1 2 3 4 5 0.4 0.8 1.4 1.2 0.6 1.0 0.2 Input Voltage VIN (V) Supply Current ISS (µA) 0 1 2 3 4 5 0.4 0.8 1.4 1.2 0.6 1.0 0.2 Input Voltage VIN (V) Supply Current ISS (µA)

No. EA-239-230822 4) Output Voltage vs. Temperature (C1=Ceramic 0.1µF, C2=Ceramic 0.1µF, IOUT=1mA) RP110x08xx RP110x25xx RP110x36xx 5) Supply Current vs. Temperature (C1=Ceramic 0.1µF, C2=Ceramic 0.1µF) RP110x08xx RP110x25xx -40 -25 0 25 50 85 Output Voltage VOUT (V) 0.82 0.84 0.86 0.80 0.76 0.78 0.74 Temperature Topt (°C) VIN=1.8V -40 -25 0 25 50 85 Output Voltage VOUT (V) 2.48 2.52 2.50 2.54 2.56 2.46 2.42 2.44 2.40 Temperature Topt (°C) VIN=3.5V -40 -25 0 25 50 85 Output Voltage VOUT (V) 3.57 3.61 3.59 3.65 3.63 3.69 3.67 3.55 3.51 3.53 3.49 Temperature Topt (°C) VIN=4.6V -40 -25 0 25 50 85 1.5 2.0 2.5 1.0 0.5 Temperature Topt (°C) VIN=1.8V Supply Current ISS (µA) -40 -25 0 25 50 85 1.5 2.0 2.5 1.0 0.5 Temperature Topt (°C) VIN=3.5V Supply Current ISS (µA)

No. EA-239-230822 RP110x36xx 6) Dropout Voltage vs. Output Current (C1=Ceramic 0.1µF, C2=Ceramic 0.1µF, Topt=25°C) RP110x08xx RP110x25xx RP110x36xx -40 -25 0 25 50 85 1.5 2.0 2.5 1.0 0.5 Temperature Topt (°C) VIN=4.6V Supply Current ISS (µA) 0 25 50 75 100 125 150 Dropout Voltage VDIF (mV) 400 800 1200 600 1000 200 Output Current IOUT (mA) 85°C 25°C -40°C 0 25 50 75 100 125 150 Dropout Voltage VDIF (mV) 100 200 350 150 250 300 Output Current IOUT (mA) 85°C 25°C -40°C 0 25 50 75 100 125 150 Dropout Voltage VDIF (mV) 100 200 300 150 250 Output Current IOUT (mA) 85°C 25°C -40°C

No. EA-239-230822 7) Dropout Voltage vs Set Output Voltage (C1=Ceramic 0.1µF, C2=Ceramic 0.1µF, Topt=25°C) 8) Ripple Rejection vs. Input Bias Voltage (C1=none, C2=Ceramic 0.1µF, Ripple=0.2Vp-p,Topt=25°C) RP110x08xx RP110x25xx RP110x36xx RP110x08xx 0.8 1.6 2.4 3.6 Dropout Voltage VDIF (mV) 600 800 1000 400 100 200 700 900 500 300 Set Output Voltage VREG (V) 3.21.2 2.0 2.8 IOUT=1mA IOUT=30mA IOUT=50mA IOUT=150mA 0.9 1.5 1.8 Ripple Rejection RR (dB) Input Voltage VIN (V) 1.2 100Hz 1kHz 10kHz 100kHz IOUT=1mA 2.6 3.2 3.5 Ripple Rejection RR (dB) Input Voltage VIN (V) 2.9 100Hz 1kHz 10kHz 100kHz IOUT=1mA 3.7 4.3 4.6 Ripple Rejection RR (dB) Input Voltage VIN (V) 4.0 100Hz 1kHz 10kHz 100kHz IOUT=1mA 0.9 1.5 1.8 Ripple Rejection RR (dB) Input Voltage VIN (V) 1.2 100Hz 1kHz 10kHz 100kHz IOUT=30mA

No. EA-239-230822 RP110x25xx RP110x36xx 9) Ripple Rejection vs. Frequency (C1=none, C2=Ceramic 0.1µF, Ripple=0.2Vp-p, Topt=25°C) RP110x08xx RP110x25xx RP110x36xx 2.6 3.2 3.5 Ripple Rejection RR (dB) Input Voltage VIN (V) 2.9 IOUT=30mA 100Hz 1kHz 10kHz 100kHz 3.7 4.3 4.6 Ripple Rejection RR (dB) Input Voltage VIN (V) 4.0 IOUT=30mA 100Hz 1kHz 10kHz 100kHz 0.1 101.0 1000100 Frequency f (kHz) Ripple Rejection RR (dB) IOUT=1mA IOUT=30mA IOUT=150mA IOUT=150mA (VIN=2.5V) VIN=1.8V Frequency f (kHz) Ripple Rejection RR (dB) IOUT=1mA IOUT=30mA IOUT=150mA VIN=3.5V 0.1 101.0 1000100 Frequency f (kHz) Ripple Rejection RR (dB) IOUT=1mA IOUT=30mA IOUT=150mA VIN=4.6V 0.1 101.0 1000100

No. EA-239-230822 10) Input Transient Response (C1=none, C2=0.1µF, IOUT=30mA, tr=tf=5µs, Topt=25°C) RP110x08xx RP110x25xx RP110x33xx 11) Load Transient Response (C1=none, tr=tf=5µs, Topt=25°C) RP110x08xx RP110x25xx 0.6 0.9 1.0 0.7 0.8 3.8 2.8 1.8 Input Voltage VIN (V) Output Voltage Input Voltage Time t (ms) Output Voltage VOUT (V) 2.3 2.6 2.8 2.7 2.4 2.5 5.5 4.5 3.5 Input Voltage VIN (V) Output Voltage Input Voltage Time t (ms) Output Voltage VOUT (V) 3.1 3.4 3.5 3.6 3.2 3.3 6.2 5.2 4.2 Input Voltage VIN (V) Output Voltage Input Voltage Time t (ms) Output Voltage VOUT (V) 0.4 1.0 1.2 0.6 0.8 150 100 Output Current VOUT (mA) Output Voltage Output Current Time t (ms) Output Voltage VOUT (V) 50mA 100mA VIN=1.8V, C2=0.1µF 1.9 2.8 3.1 2.2 2.5 150 100 Output Current IOUT (mA) Output Voltage Output Current Time t (ms) Output Voltage VOUT (V) 50mA 100mA VIN=3.5V, C2=0.1µF

No. EA-239-230822 RP110x36xx RP110x08xx RP110x25xx RP110x36xx RP110x08xx RP110x25xx 3.0 3.9 4.2 3.3 3.6 150 100 Output Current IOUT (mA) Output Voltage Output Current Time t (ms) Output Voltage VOUT (V) 50mA 100mA VIN=4.6V, C2=0.1µF 0.4 1.0 1.2 0.6 0.8 Output Current IOUT (mA) Output Voltage Output Current Time t (ms) Output Voltage VOUT (V) 1mA 10mA VIN=1.8V, C2=0.1µF 1.9 2.8 2.2 2.5 Output Current IOUT (mA) Output Voltage Output Current Time t (ms) Output Voltage VOUT (V) 1mA 10mA VIN=3.5V, C2=0.1µF 3.2 3.8 4.0 3.4 3.6 Output Current IOUT (mA) Output Voltage Output Current Time t (ms) Output Voltage VOUT (V) 1mA 10mA VIN=4.6V, C2=0.1µF 0.4 1.0 0.6 0.8 150 100 Output Current IOUT (mA) Output Voltage Output Current Time t (ms) Output Voltage VOUT (V) 50mA 100mA VIN=1.8V, C2=1.0µF 1.9 2.8 2.2 2.5 150 100 Output Current IOUT (mA) Output Voltage Output Current Time t (ms) Output Voltage VOUT (V) 50mA 100mA VIN=3.5V, C2=1.0µF

No. EA-239-230822 RP110x36xx RP110x08xx RP110x25xx RP110x36xx 12) Turn On Speed (C1=Ceramic 0.1µF, C2=Ceramic 0.1µF, Topt=25°C) RP110x08xC RP110x08xB/D 3.0 3.9 3.3 3.6 150 100 Output Current IOUT (mA) Output Voltage Output Current Time t (ms) Output Voltage VOUT (V) 50mA 100mA VIN=4.6V, C2=1.0µF 0.4 1.0 0.6 0.8 Output Current IOUT (mA) Output Voltage Output Current Time t (ms) Output Voltage VOUT (V) 1mA 10mA VIN=1.8V, C2=1.0µF 1.9 2.8 2.2 2.5 Output Current IOUT (mA) Output Voltage Output Current Time t (ms) Output Voltage VOUT (V) 1mA 10mA VIN=3.5V, C2=1.0µF 3.2 3.8 3.4 3.6 Output Current IOUT (mA) Output Voltage Output Current Time t (ms) Output Voltage VOUT (V) 1mA 10mA VIN=4.6V, C2=1.0µF 0.6 1.0 0.8 0.2 0.4 2.0 1.5 0.5 1.0 0 50 100 150 200 250 300 350 400 Input Voltage VIN (V) Output Voltage Input Voltage Output Voltage VOUT (V) IOUT=0mA IOUT=30mA IOUT=150mA Time t (µs) 0.6 VIN=1.8V 1.0 0.8 0.2 0.4 2.0 1.5 0.5 1.0 0 50 100 150 200 250 300 350 400 CE Input Voltage VCE (V) Output Voltage CE Input Voltage Output Voltage VOUT (V) IOUT=0mA IOUT=30mA IOUT=150mA Time t (µs)

No. EA-239-230822 RP110x25xC RP110x25xB/D RP110x36xC RP110x36xB/D 13) Turn Off Speed with CE pin (C1=Ceramic 0.1µF, C2=Ceramic 0.1µF, Topt=25°C) RP110x08xB RP110x08xB 2.5 0.5 1.5 2.0 3.0 1.0 0 50 100 150 200 250 300 350 400 Input Voltage VIN (V) Output Voltage Input Voltage Output Voltage VOUT (V) IOUT=0mA IOUT=30mA IOUT=150mA Time t (µs) 2.5 VIN=3.5V 0.5 1.5 2.0 3.0 1.0 0 50 100 150 200 250 300 350 400 CE Input Voltage VCE (V) Output Voltage CE Input Voltage Output Voltage VOUT (V) IOUT=0mA IOUT=30mA IOUT=150mA Time t (µs) 2.5 3.5 0.5 1.5 2.0 4.0 3.0 1.0 0 50 100 150 200 250 300 350 400 Input Voltage VIN (V) Output Voltage Input Voltage Output Voltage VOUT (V) IOUT=0mA IOUT=30mA IOUT=150mA Time t (µs) 2.5 VIN=4.6V 3.5 0.5 1.5 2.0 4.0 3.0 1.0 0 50 100 150 200 250 300 350 400 CE Input Voltage VCE (V) Output Voltage Output Voltage VOUT (V) CE Input Voltage IOUT=0mA IOUT=30mA IOUT=150mA Time t (µs) -0.2 0.4 VIN=1.8V 0.8 0.6 0.2 2.0 1.0 1.5 0.5 0 10 20 30 40 50 60 70 80 CE Input Voltage VCE (V) Output Voltage Output Voltage VOUT (V) CE Input Voltage IOUT=150mA IOUT=30mA Time t (µs) 0.6 VIN=1.8V 0.8 0.2 0.4 2.0 1.0 1.5 0.5 0 10 20 30 40 50 60 70 80 CE Input Voltage VCE (V) Output Voltage Time t (ms) Output Voltage VOUT (V) CE Input Voltage IOUT=0mA

No. EA-239-230822 RP110x08xD RP110x25xB RP110x25xB RP110x25xD RP110x36xB RP110x36xB -0.2 0.4 VIN=1.8V 0.8 0.6 0.2 2.0 1.0 1.5 0.5 0 10 20 30 40 50 60 70 80 CE Input Voltage VCE (V) Output Voltage Output Voltage VOUT (V) CE Input Voltage IOUT=0mA IOUT=30mA IOUT=150mA Time t (µs) VIN=3.5V 0 10 20 30 40 50 60 70 80 CE Input Voltage VCE (V) Output Voltage Output Voltage VOUT (V) CE Input Voltage IOUT=30mA IOUT=150mA Time t (µs) VIN=3.5V 10 30 500 20 40 60 70 80 90 100 110 120 CE Input Voltage VCE (V) Output Voltage Time t (ms) Output Voltage VOUT (V) CE Input Voltage IOUT=0mA VIN=3.5V 0 10 20 30 40 50 60 70 80 CE Input Voltage VCE (V) Output Voltage Output Voltage VOUT (V) CE Input Voltage IOUT=0mA IOUT=30mA IOUT=150mA Time t (µs) VIN=4.6V 0 10 20 30 40 50 60 70 80 CE Input Voltage VCE (V) Output Voltage VOUT (V) Output Voltage CE Input Voltage IOUT=150mA IOUT=30mA Time t (µs) VIN=4.6V 0 10 20 30 50 70 90 11040 60 80 100 120 CE Input Voltage VCE (V) Time t (ms) Output Voltage VOUT (V) Output Voltage CE Input Voltage IOUT=0mA

No. EA-239-230822 RP110x36xD 14) Inrush Current (C1=none, IOUT=0mA, Topt=25°C) RP110x08xC RP110x08xB/D VIN=4.6V 0 10 20 30 40 50 60 70 80 CE Input Voltage VCE (V) Output Voltage VOUT (V) Output Voltage CE Input Voltage IOUT=0mA IOUT=30mA IOUT=150mA Time t (µs) 50 150 250 3500 100 200 300 400 Input Voltage VIN / Output Voltage VOUT (V) Inrush Current IVDD (mA) 0.4 0.8 0.6 1.2 1.0 1.8 1.6 1.4 2.0 0.2 150 100 250 200 350 300 Output Voltage Inrush Current COUT=0.1µF Input Voltage (tr=0.5µs) COUT=1.0µF COUT=2.2µF COUT=4.7µF COUT=10µF COUT=22µF Time t (µs) 50 150 250 3500 100 200 300 400 CE Input Voltage VCE / Output Voltage VOUT (V) Inrush Current IVDD (mA) 0.4 0.8 0.6 1.2 1.0 1.8 1.6 1.4 2.0 0.2 150 100 250 200 350 300 Output Voltage CE Input Voltage Inrush Current VIN=1.8V COUT=0.1µF COUT=1.0µF COUT=2.2µF COUT=4.7µF COUT=10µF COUT=22µF Time t (µs)

No. EA-239-230822 RP110x25xC RP110x25xB/D RP110x36xC RP110x36xB/D 50 150 250 3500 100 200 300 400 Input Voltage VIN / Output Voltage VOUT (V) Inrush Current IVDD (mA) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 150 100 250 200 350 300 Output Voltage Inrush Current COUT=0.1µF COUT=1.0µF COUT=2.2µF COUT=4.7µF COUT=10µF Input Voltage (tr=0.5µs) Time t (µs) 50 150 250 3500 100 200 300 400 CE Input Voltage VCE / Output Voltage VOUT (V) Inrush Current IVDD (mA) 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 150 100 250 200 350 300 Output Voltage CE Input Voltage Inrush Current VIN=3.5V COUT=0.1µF COUT=1.0µF COUT=2.2µF COUT=4.7µF COUT=10µF Time t (µs) 50 150 250 3500 100 200 300 400 Input Voltage VIN / Output Voltage VOUT (V) Inrush Current IVDD (mA) 1.0 2.0 1.5 3.0 2.5 4.5 4.0 3.5 5.0 0.5 150 100 250 200 350 300 Output Voltage Inrush Current COUT=0.1µF COUT=1.0µF COUT=2.2µF COUT=4.7µF COUT=10µF Time t (µs) Input Voltage (tr=0.5µs) 50 150 250 3500 100 200 300 400 CE Input Voltage VCE / Output Voltage VOUT (V) Inrush Current IVDD (mA) 1.0 2.0 1.5 3.0 2.5 4.5 4.0 3.5 5.0 0.5 150 100 250 200 350 300 Output Voltage CE Input Voltage Inrush Current VIN=4.6V Time t (µs) COUT=0.1µF COUT=1.0µF COUT=2.2µF COUT=4.7µF COUT=10µF

No. EA-239-230822 ESR vs. Output Current When using these ICs, consider the following points: The relations between IOUT (Output Current) and ESR of an output capacitor are shown below. The conditions when the white noise level is under 40µV (Avg.) are marked as the hatched area in the graph. Measurement conditions Frequency Band : 10Hz to 2MHz Temperature : −40°C to 85°C Hatched Area : Noise level is under 40µ V(Avg.) C IN,COUT : 0.1µ F RP110x08xx RP110x25xx RP110x36xx 0 50 25 75 100 125 150 100 1000 0.1 0.01 Output Current IOUT (mA) VIN=1.4V to 5.25V ESR (Ω) 15mΩ 0 50 25 75 100 125 150 100 1000 0.1 0.01 Output Current IOUT (mA) VIN=2.5V to 5.25V ESR (Ω) 15mΩ 0 50 25 75 100 125 150 100 1000 0.1 0.01 Output Current IOUT (mA) VIN=3.6V to 5.25V ESR (Ω) 15mΩ

  1. T he products and the product specifications described in this document are subject to change or discontinuation of production without notice for reasons such as improvement. Therefore, before deciding to use the products, please refer to our sales representatives for the latest information thereon. 2. The materials in this document may not be copied or otherwise reproduced in whole or in part without the prior written consent of us. 3. This product and any technical information relating thereto are subject to complementary export controls (so- called KNOW controls) under the Foreign Exchange and Foreign Trade Law, and related politics ministerial ordinance of the law. (Note that the complementary export controls are inapplicable to any application-specific products, except rockets and pilotless aircraft, that are insusceptible to design or program changes.) Accordingly, when exporting or carrying abroad this product, follow the Foreign Exchange and Foreign Trade Control Law and its related regulations with respect to the complementary export controls. 4. The technical information described in this document shows typical characteristics and example application circuits for the products. The release of such information is not to be construed as a warranty of or a grant of license under our or any third party's intellectual property rights or any other rights. 5. The products listed in this document are intended and designed for use as general electronic components in standard applications (office equipment, telecommunication equipment, measuring instruments, consumer electronic products, amusement equipment etc.). Those customers intending to use a product in an application requiring extreme quality and reliability, for example, in a highly specific application where the failure or misoperation of the product could result in human injury or death should first contact us.
  • Aerospace Equipment
  • Equipment Used in the Deep Sea
  • Power Generator Control Equipment (nuclear, steam, hydraulic, etc.)
  • Life Maintenance Medical Equipment
  • Fire Alarms / Intruder Detectors
  • Vehicle Control Equipment (automotive, airplane, railroad, ship, etc.)
  • Various Safety Devices
  • Traffic control system
  • Combustion equipment In case your company desires to use this product for any applications other than general electronic equipment mentioned above, make sure to contact our company in advance. Note that the important requirements mentioned in this section are not applicable to cases where operation requirements such as application conditions are confirmed by our company in writing after consultation with your company. 6. We are making our continuous effort to improve the quality and reliability of our products, but semiconductor products are likely to fail with certain probability. In order to prevent any injury to persons or damages to property resulting from such failure, customers should be careful enough to incorporate safety measures in their design, such as redundancy feature, fire containment feature and fail-safe feature. We do not assume any liability or responsibility for any loss or damage arising from misuse or inappropriate use of the products. 7. The products have been designed and tested to function within controlled environmental conditions. Do not use products under conditions that deviate from methods or applications specified in this datasheet. Failure to employ the products in the proper applications can lead to deterioration, destruction or failure of the products. We shall not be responsible for any bodily injury, fires or accident, property damage or any consequential damages resulting from misuse or misapplication of the products. 8. Quality Warranty 8-1. Quality Warranty Period In the case of a product purchased through an authorized distributor or directly from us, the warranty period for this product shall be one (1) year after delivery to your company. For defective products that occurred during this period, we will take the quality warranty measures described in section 8-2. However, if there is an agreement on the warranty period in the basic transaction agreement, quality assurance agreement, delivery specifications, etc., it shall be followed. 8-2. Quality Warranty Remedies When it has been proved defective due to manufacturing factors as a result of defect analysis by us, we will either deliver a substitute for the defective product or refund the purchase price of the defective product. Note that such delivery or refund is sole and exclusive remedies to your company for the defective product. 8-3. Remedies after Quality Warranty Period With respect to any defect of this product found after the quality warranty period, the defect will be analyzed by us. On the basis of the defect analysis results, the scope and amounts of damage shall be determined by mutual agreement of both parties. Then we will deal with upper limit in Section 8-2. This provision is not intended to limit any legal rights of your company. 9. Anti-radiation design is not implemented in the products described in this document. 10. The X-ray exposure can influence functions and characteristics of the products. Confirm the product functions and characteristics in the evaluation stage. 11. WLCSP products should be used in light shielded environments. The light exposure can influence functions and characteristics of the products under operation or storage. 12. Warning for handling Gallium and Arsenic (GaAs) products (Applying to GaAs MMIC, Photo Reflector). These products use Gallium (Ga) and Arsenic (As) which are specified as poisonous chemicals by law. For the prevention of a hazard, do not burn, destroy, or process chemically to make them as gas or power. When the product is disposed of, please follow the related regulation and do not mix this with general industrial waste or household waste. 13. Please contact our sales representatives should you have any questions or comments concerning the products or the technical information. Official website https://www.nisshinbo-microdevices.co.jp/en/ Purchase information https://www.nisshinbo-microdevices.co.jp/en/buy/