RP10-E RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • 2:1 Wide Input Voltage Range
  • 1.6kVDC Isolation
  • UL Certified
  • Efficiency up to 87%
  • Fixed Operating Frequency
  • Six-Sided Continuous Shield PD-1REV.: 1/2016www.recom-power.com DC/DC Converter

3 YEAR

Description

The RP10-E series DC/DC converters are certified to UL 60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The industry standard 2” x 1” package meets military standards for thermal shock and vibration tolerance and is available with an optional remote on/off control pin. This series is also available with the /M1 and /M2 option which is particularly suitable for extended temperature range applications. E196683

10 Watt

2“ x 1“ Single & Dual Output RP10-E Selection Guide Part Number Input Output Output Input(1) Efficiency (1) Max. Capacitive Voltage Range Voltage Current Current typ. Load(2) [VDC] [VDC] [mA] [mA] [%] [µF] RP10-123.3SE(3,4) 9-18 3.3 2000 688 80 6800 RP10-1205SE(3,4) 9-18 5 2000 1029 81 4700 RP10-1212SE(3,4) 9-18 12 830 988 84 690 RP10-1215SE(3,4) 9-18 15 670 997 84 470 RP10-243.3SE(3,4) 18-36 3.3 2000 344 80 6800 RP10-2405SE(3,4) 18-36 5 2000 508 82 4700 RP10-2412SE(3,4) 18-36 12 830 494 84 690 RP10-2415SE(3,4) 18-36 15 670 499 84 470 RP10-483.3SE(3,4) 36-75 3.3 2000 172 80 6800 RP10-4805SE(3,4) 36-75 5 2000 248 84 4700 RP10-4812SE(3,4) 36-75 12 830 241 86 690 RP10-4815SE(3,4) 36-75 15 670 241 87 470 RP10-1205DE(3,4) 9-18 ±5 ±1000 992 84 ±680 RP10-1212DE(3,4) 9-18 ±12 ±416 1002 83 ±330 RP10-1215DE(3,4) 9-18 ±15 ±333 991 84 ±110 RP10-2405DE(3,4) 18-36 ±5 ±1000 502 83 ±680 RP10-2412DE(3,4) 18-36 ±12 ±416 489 85 ±330 RP10-2415DE(3,4) 18-36 ±15 ±333 496 84 ±110 RP10-4805DE(3,4) 36-75 ±5 ±1000 248 84 ±680 RP10-4812DE(3,4) 36-75 ±12 ±416 242 86 ±330 RP10-4815DE(3,4) 36-75 ±15 ±333 245 85 ±110 UL60950-1 Certified Input Voltage Output Voltage Single or Dual Ordering Expamples: RP10-1205SE/P = 12V Input, 5V Output, Standard Temp. Range, Positive Logic CTRL pin fitted RP10-4805DE/M1-HC = 48V Input, 5V Output, Extended Temp. Range, No CTRL pin, Heat-sink fitted Model Numbering Notes: Note3: add suffix “M1” for higher efficiencies and extended temperature range add suffix “P” for CTRL function with Positive Logic (1=ON, 0=OFF) add suffix “N” for CTRL function with Negative Logic (0=ON, 1=OFF) Note4: add suffix -HC for premounted Heat-sink and clips Package(4) Control Logic(3) Notes: Note1: Maximum value at nominal input voltage and full load. Note2: Test by minimum Vin and constant resistor load.

Parameter Condition Min. Typ. Max. Input Voltage Range nom. Vin = 12V nom. Vin = 24V nom. Vin = 48V 9VDVC 18VDC 36VDC 12VDC 24VDC 48VDC 18VDC 36VDC 75VDC Under Voltage Lockout (UVLO) none Input Filter Pi-Type Input Reflected Ripple Current(5) nominal Vin and full load 30mAp-p Input Surge Voltage 12V input, 100ms max. 24V input, 100ms max. 48V input, 100ms max. 36VDC 50VDC 100VDC Start-up time nominal Vin and constant resistor load Power up 20ms Operating Frequency Range 270kHz 300kHz 330kHz Minimum Load (6) of full load 10% Ripple and Noise measured by 20MHz bandwidth Single Dual 50mVp-p 75mVp-p Remote ON/OFF(7) Positive Logic DC-DC ON DC-DC OFF Open or 3.5V < Vr < 12V Short or 0V < Vr < 1.2V Negative Logic DC-DC ON DC-DC OFF Short or 0V < Vr < 1.2V Open or 3.5V < Vr < 12V Input current of Remote pin (CTRL) DC-DC OFF 20mA DC-DC ON -0.5mA +1.0mA continued on next page PD-2 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP10-E Series Notes: Note5: Simulated source impedance of 12μH. 12μH inductor in series with +Vin. Note6: The RP10 (W) series required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. Note7: The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin. If no suffix is specified, the control pin will be omitted. Efficiency vs. Output Current Efficiency vs. Input Voltage 9Vin 12Vin 18Vin Efficiency [%] Output Current [%] 20 30 40 50 60 70 80 90 100 Efficiency [%] Total Input Voltage [%] 11 12 14 16 1810 13 15 17 RP10-1205SE

Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted REGULATIONS Parameter Condition Value Output Voltage Accuracy ±1% Line Voltage Regulation low line to high line ±0.2% Load Voltage Regulation 0% to 100% load Single Dual ±0.5% ±1.0% Cross Regulation asymmetrical 25%<>100% load ±5% Transient Response recovery time 25% load step change 250μs typ. RP10-E Series PD-3REV.: 1/2016www.recom-power.com Efficiency vs. Output Current Efficiency vs. Output Current Efficiency vs. Input Voltage Efficiency vs. Input Voltage 18Vin 24Vin 36Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 36Vin 48Vin 75Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 Efficiency [%] Total Input Voltage [%] 22 24 28 32 3620 26 30 34 Efficiency [%] Total Input Voltage [%] 44 48 56 66 7540 52 60 72 RP10-2405SE RP10-4805SE

PD-4 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP10-E Series ENVIRONMENTAL Parameter Condition Value Operating Temperature Range (Reference Derating Curve)(9) Standard with derating with derating -25°C to +100°C -40°C to +85°C Maximum Case Temperature +105°C Temperature Coefficient ±0.02%/°C max. Thermal Impedance vertical direction by natural convection (20LFM) without Heat-Sink with Heat-Sink 12°C/Watt 10°C/Watt Operating Humidity non-condensing 5% - 95% RH Thermal Shock MIL-STD-810F Vibration MIL-STD-810F MTBF(10) MIL-HDBK-217F, Full Load 3342 x103 hours continued on next page -25 60 80 10040200-20 100 Ambient Temperature [°C] Output Power [%] -25 80 10040200-20 100 Ambient Temperature [°C] Output Power [%] Derating Graph(9,11) PROTECTIONS Parameter Condition Value Short Circuit Protection (SCP) continuous, automatic recovery Over Voltage Protection (OVP) Zener Diode Clamp 3.3Vout 5Vout 12Vout 15Vout 3.9VDC typ. 6.2VDC typ. 15VDC typ. 18VDC typ. Over Load Protection (OLP) % of Iout rated 150% max. Isolation Voltage I/P to O/P I/P (O/P) to case 1.6kVDC/1 minute 1.6kVDC/1 minute Isolation Resistance 500VDC 1GΩ min. Isolation Capacitance 300pF max. RP10-4805SE RP10-4805SE with Heat-sink Notes: Note8: This power module is not internally fused. An input line fuse must always be used.

Certificate Type (Safety) Report / File Number Standard UL General Safety E196683 UL60950-1 1st Ed.: 2003 C22.2 No. 60950 1st. Ed.: 2003 EMC Compliance Condition Standard / Criterion EMI Standard(12) with external filter EN55022, Class A or B ESD Radiated Immunity Fast Transient(13) Surge(13) Conducted Immunity Air ±8kV and Contact ± 6kV

10 V/m

±2kV ±2kV 10 Vr.m.s EN61000-4-2, Criteria B EN61000-4-3, Criteria A EN61000-4-4, Criteria B EN61000-4-5, Criteria B EN61000-4-6, Criteria A continued on next page DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP10-E Series PD-5REV.: 1/2016www.recom-power.com -40 60 80 10040200-20 100 Ambient Temperature [°C] Output Power [%] -40 60 80 10040200-20 100 Ambient Temperature [°C] Output Power [%] Notes: Note9: M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard version. Note10: BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment). Note11: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part- number not shown here please contact our technical support service at techsupportAT@recom-power.com. Notes: Note12: The standard modules meet EMI Class A or Class B with external components, see filter suggestions below. Note13: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Recom suggests: Nippon chemi-con KY series, 220μF/100V. RP10-4805SE/M1-HCRP10-4805SE/M1 Input Input DC DC Fuse +VIN +VOUT -VOUT -VIN LOAD DC DC Fuse +VIN +VOUT COM -VOUT -VIN LOADLOAD Input Input DC DC Fuse +VIN +VOUT -VOUT -VIN LOAD DC DC Fuse +VIN +VOUT COM -VOUT -VIN LOADLOAD MODEL C1 C2 C3 RP10-12xxS_DE 2.2μF/25V

1206 MLCC

1808 MLCC

RP10-24xxS_DE N/A 1000pF/2kV RP10-48xxS_DE N/A 1000pF/2kV

PD-6 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP10-E Series DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Base Potting Nickel coated copper Non-conductive black plastic Epoxy (UL94-V0) Package Dimensions (LxWxH) without Heat-sink with Heat-sink 50.8 x 25.4 x 10.2mm 56.8 x 25.4 x 16.8mm Package Weight without Heat-sink with Heat-sink 27g 37.89g continued on next page Dimension Drawing (mm) 25.4 5.60 10.2 50.8 Ø 1.0 4Bottom View 23 5 5.10 15.20 20.30 2.50 10.20 10.20 12.70 Pin Connections Pin # Single Dual 1 +Vin +Vin 2 -Vin -Vin 3 +Vout +Vout

4 No Pin Com

6 CTRL CTRL

Pin Pitch Tolerance ±0.25mm Pin dimension tolerance ±0.1mm XX.X ± 0.5mm XX.XX ± 0.25mm Input Input DC DC Fuse C2C1 +VIN +VOUT -VOUT -VIN LOAD +VOUT COM -VOUT LOADLOAD DC DC Fuse C2C1 +VIN +VOUT -VOUT -VIN Input Input DC DC Fuse C2C1 +VIN +VOUT -VOUT -VIN LOAD +VOUT COM -VOUT LOADLOAD DC DC Fuse C2C1 +VIN +VOUT -VOUT -VIN EMI Filtering Class B MODEL C1 C2 C3/C4 L1 RP10-12xxS_DE 3.3μF/50V

1812 MLCC N/A 1000pF/2kV

CMC: 325μH ref: WE 744290321 ref.: CMC-06 RP10-24xxS_DE 2.2μF/50V CMC: 325μH ref: WE 744290321 ref.: CMC-06 RP10-48xxS_DE 2.2μF/100V

1812 MLCC

2.2μF/100V CMC: 325μH ref: WE 744290321 ref.: CMC-06

Packaging Quantity without Heat-sink with Heat-sink Tube Tray 9pcs. 20pcs. Storage Temperature Range -55°C to +125°C Storage Humidity 5% - 95% RH The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. Dimension Drawing (mm) with Heat-sink 10.2 16.8 20.30 56.80 15.20 25.4 5.6 5.10 2.50 ø1.0 24.20 50.00 5.85 1.40 1.30 1.95 1.30 Top View Heat-sink DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP10-E Series PD-7REV.: 1/2016www.recom-power.com