RP08-11005DAW

RP08-AW RECOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

• 4:1 Wide Input Voltage Range
• 1.6kVDC Isolation
• UL, EN50155 Certified
• Efficiency to 88%
• Protected Outputs
• High Input Voltage Range (110VDC) PD-1REV.: 2/2016www.recom-power.com DC/DC Converter

3 YEAR

Description

The RP08-AW series wide range input DC/DC converters are certified to UL 60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The 24V and 110VDC input versions have been especially designed for railway applications. The DIP24 package is available in both pinned and SMD case styles and meets military standards for thermal shock and vibration tolerance. E196683

8 Watt

Single & Dual Output RP08-AW Selection Guide Part Number Input Output Output Input(1) Efficiency (1) Max. Capacitive Voltage Range Voltage Current Current typ. Load(2) [VDC] [VDC] [mA] [mA] [%] [µF] RP08-243.3SAW(3) 9-36 3.3 2400 388 85 1330 RP08-2405SAW(3) 9-36 5 1600 383 87 1330 RP08-2412SAW(3) 9-36 12 666 387 86 288 RP08-2415SAW(3) 9-36 15 533 387 86 200 RP08-483.3SAW(3) 18-75 3.3 2400 194 85 1330 RP08-4805SAW(3) 18-75 5 1600 192 87 1330 RP08-4812SAW(3) 18-75 12 666 191 87 288 RP08-4815SAW(3) 18-75 15 533 189 88 200 RP08-1103.3SAW(3) 43-160 3.3 2400 86 84 1330 RP08-11005SAW(3) 43-160 5 1600 86 85 1330 RP08-11012SAW(3) 43-160 12 666 84 86 288 RP08-11015SAW(3) 43-160 15 533 85 86 200 RP08-2405DAW(3) 9-36 ±5 ±800 397 84 ±900 RP08-2412DAW(3) 9-36 ±12 ±333 387 86 ±133 RP08-2415DAW(3) 9-36 ±15 ±267 388 86 ±90 RP08-4805DAW(3) 18-75 ±5 ±800 198 84 ±900 RP08-4812DAW(3) 18-75 ±12 ±333 191 87 ±133 RP08-4815DAW(3) 18-75 ±15 ±267 192 87 ±90 RP08-11005DAW(3) 43-160 ±5 ±800 89 82 ±900 RP08-11012DAW(3) 43-160 ±12 ±333 85 85 ±133 RP08-11015DAW(3) 43-160 ±15 ±267 86 85 ±90 UL60950-1 Certified EN50155 CertifiedInput Voltage Output Voltage Single or Dual Package(3) Model Numbering Ordering Examples RP08-4805AW/SMD = 48V Input, 5V Output, SMD Package RP08-2405AW = 24V Input, 5V Output, DIP24 Package Notes: Note3: No suffix for standard package (DIP24), add suffix “SMD” for SMD package Notes: Note1: Maximum value at nominal input voltage and full load Note2: Test by minimum Vin and constant resistor load.

Parameter Condition Min. Typ. Max. Input Voltage Range nom. Vin = 24V nom. Vin = 48V nom. Vin = 110V 9VDVC 18VDC 43VDC 24VDC 48VDC 110VDC 36VDC 75VDC 160VDC Under Voltage Lockout (UVLO) Vin= 24V DC-DC ON DC-DC OFF 8VDC 9VDC Vin= 48V DC-DC ON DC-DC OFF 16VDC 18VDC Vin=110V DC-DC ON DC-DC OFF 40VDC 43VDC Input Filter Pi-Type Input reflected Ripple Current nominal Vin and full load 20mAp-p Input Surge Voltage Vin = 24V, 100ms max. Vin = 48V, 100ms max. Vin = 110V, 100ms max. 50VDC 100VDC 170VDC Start-up time Power up Remote ON/OFF 450ms 5ms Operating Frequency Range 270kHz 300kHz 330kHz Minimum Load 0% Ripple and Noise 20MHz bandwidth Vin = 24V Vin = 48V Vin = 110V 50mVp-p 50mVp-p 75mVp-p Remote ON/OFF(4) Positive Logic DC-DC ON DC-DC OFF Open or 3.0 < Vr < 12VDC Short or 0 < Vr < 1.2VDC Input current of Remote pin (CTRL) DC-DC OFF 2.5mA DC-DC ON -0.5mA +0.5mA continued on next page PD-2 REV.: 2/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP08-AW Series Notes: Note4: The ON/OFF control pin voltage is referenced to -Vin pin. Efficiency vs. Output Current Efficiency vs. Input Voltage Efficiency [%] Input Voltage [VDC] 15 18 24 30 3612 21 27 33 Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 9Vin 24Vin 36Vin RP08-2405SAW

Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted REGULATIONS Parameter Condition Value Output Voltage Accuracy ±1% Line Voltage Regulation low line to high line, full load ±0.2% Load Voltage Regulation no load to full load DIP24 Single Dual ±0.5% ±1% SMD Single Dual ±1% ±1% 10% load to 90% load DIP24 Single Dual ±0.3% ±0.8% SMD Single Dual ±0.8% ±0.8% Cross Regulation asymmetrical 25%<>100% load ±5% Transient Response recovery time 25% load step change 250μs typ. RP08-AW Series PD-3REV.: 2/2016www.recom-power.com Efficiency vs. Output Current Efficiency vs. Output Current Efficiency vs. Input Voltage Efficiency vs. Input Voltage Efficiency [%] Input Voltage [VDC] 30 36 48 60 757224 42 54 66 Efficiency [%] Input Voltage [VDC] 67 79 103 139 16055 91 127115 151 18Vin 48Vin 75Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 43Vin 110Vin 160Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 RP08-4805SAW RP08-11005SAW

Operating Temperature Range(6) without derating with derating -40°C to +85°C -40°C to +105°C Maximum Case Temperature +105°C Temperature Coefficient ±0.02%/°C max. Thermal Impedance Natural convection (20LFM) 20°C/Watt Operating Humidity non-condensing 5% - 95% RH Shock MIL-STD-810F Thermal Shock MIL-STD-810F Vibration MIL-STD-810F MTBF MIL-HDBK-217F Bellcore-TR-NWT-000332(7) 2832 x 103 hours 2350 x 103 hours -40 60 10040200-20 100 Ambient Temperature [°C] Output Power [%] 120 105 PD-4 REV.: 2/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP08-AW Series Derating Graph(8) RP08-4805SAW Notes: Note6: Converter can meet the railway T2 and TX temperature requirement Note7: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground Benign and controlled environment). MIL-HDBK-217F, Notice 2, Full Load, 25°C, Ground Benign. Note8: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part- number not shown here please contact our technical support service at techsupportAT@recom-power.com. PROTECTIONS Parameter Condition Value Short Circuit Protection (SCP) continuous, automatic recovery Over Voltage Protection (OVP) Single Output 3.3Vout 5Vout 12Vout 15Vout 3.9VDC typ. 6.2VDC typ. 15VDC typ. 18VDC typ. Over Load Protection (OLP) % of Iout rated 150% typ. Isolation Voltage DIP24 I/P to O/P I/P (O/P) to case 1.6kVDC/1 minute 1.6kVDC/1 minute SMD I/P to O/P I/P (O/P) to case 1.6kVDC/1 minute 1.0kVDC/1 minute Isolation Resistance 500VDC 1GΩ min. Isolation Capacitance 1500pF max. Notes: Note5: This power module is not internally fused. An input line fuse must always be used.

Certificate Type (Safety) Report / File Number Standard UL General Safety E196683 UL60950-1 1st Ed.: 2003 C22.2 No. 60950 1st. Ed.: 2003 Railway 15A100701E-C EN50155 EMC Compliance Condition Standard / Criterion EMI Standard(9) with external filter EN55022, EN55011, Class A or B ESD Radiated Immunity Fast Transient(10) Surge(10) Conducted Immunity Air ±8kV and Contact ± 6kV

20 V/m

±2kV ±2kV 10 Vr.m.s EN61000-4-2, Criteria A EN61000-4-3, Criteria A EN61000-4-4, Criteria A EN61000-4-5, Criteria A EN61000-4-6, Criteria A DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP08-AW Series PD-5REV.: 2/2016www.recom-power.com Notes: Note9: The standard modules meet EMI Class A or Class B with external components, see filter suggestions below. Note10: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. Recom suggests Nippon chemi-con KY series 220μF/100V (24V and 48V) or 150μF/200V (110V). EMI Filtering Class A Input Input DC DC Fuse +VIN +VOUT -VOUT -VIN LOAD DC DC Fuse +VIN +VOUT COM -VOUT -VIN LOADLOAD Input Input DC DC Fuse +VIN +VOUT -VOUT -VIN LOAD DC DC Fuse +VIN +VOUT COM -VOUT -VIN LOADLOAD MODEL C1 C2 C3/C4 RP08-24xxS_DW RP08-24xxS_DW/SMD 1.0μF/50V 1210MLCC N/A 1000pF/2kV

1206 MLCC

RP08-48xxS_DW RP08-48xxS_DW/SMD 0.47μF/100V 1810MLCC N/A 1000pF/2kV RP08-110xxS_DW RP08-110xxS_DW/SMD 1μF/250V

1812 MLCC

1μF/250V +VIN +VOUT -VOUT -VIN LOAD +VOUT COM -VOUT LOADLOAD DC DC Fuse C2C1 +VIN +VOUT -VOUT -VIN Input Input DC DC Fuse C2C1 +VIN +VOUT -VOUT -VIN LOAD +VOUT COM -VOUT LOADLOAD DC DC Fuse C2C1 +VIN +VOUT -VOUT -VIN MODEL C1 C2 C3/C4 C5 L1 RP08-24xxS_DW RP08-24xxS_DW/SMD 4.7μF/50V

1812 MLCC N/A 1000pF/2kV

1206 MLCC N/A

CMC: 325μH ref.: WE 744290321 ref.: CMC-06 RP08-48xxS_DW RP08-48xxS_DW/SMD 1.5μF/100V 1.5μF/100V CMC: 325μH ref.: WE 744290321 ref.: CMC-06 RP08-110xxS_DW RP08-110xxS_DW/SMD 1μF/250V 22μF/200V Al Cap. (lie down) Chemi-con KMF CMC: 497μH ref.: WE 7448013501

PD-6 REV.: 2/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP08-AW Series DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Base Potting Nickel coated copper Non-conductive black plastic Epoxy (UL94-V0) Package Dimensions (LxWxH) DIP SMD 31.8 x 20.3 x 10.3mm 32.0 x 21.3 x 10.9mm Package Weight DIP SMD 18g 20g DIP24 Dimension Drawing (mm) Pin Connections Pin # Single Dual

1 Ctrl Ctrl

9 NC Com

11 NC -Vout

Pin Pitch Tolerance ±0.25mm Pin dimension tolerance ±0.1mm XX.X ± 0.5mm XX.XX ± 0.25mm NC = No Connection 20.3 3.8 10.2 31.8 Ø 0.5 20.32 2.0 2 3 Bottom View 9 11 23 22 16 14 5.08 15.20 2.54 SMD Dimension Drawing (mm) 10.9 11.220.3 2.54 0.50 1.60 2.40 32.0 10.16 27.94 25.4 25.4 2.54 1.0 x 0.50 1 4 5 9 10 11 1232 24 21 20 Bottom View Top View 16 15 14 132223 Pin area Pin Connections Pin # Single Dual Pin Pitch Tolerance ±0.25mm Pin dimension tolerance ±0.1mm XX.X ± 0.5mm XX.XX ± 0.25mm NC = No Connection

Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP08-AW Series PD-7REV.: 2/2016www.recom-power.com PACKAGING INFORMATION Parameter Type Value Packaging Quantity 7pcs. Storage Temperature Range -55°C to +125°C Storage Humidity 5% - 95% RH The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.