RP05-2433SAW RECOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
Selection Guide 12V, 24V and 48V Input Types
Description
Part Number Input Output Output Input (4) Efficiency(5) Capacitive(6) Range Voltage Current Current Load max. DIP24 (SMD) VDC VDC mA mA % µF RP05-243.3SAW 9-36 3.3 1000 191 76 2200 RP05-2405SAW 9-36 5 1000 285 77 1000 RP05-2412SAW 9-36 12 470 309 80 220 RP05-2415SAW 9-36 15 400 329 80 150 RP05-483.3SAW 18-75 3.3 1000 100 73 2200 RP05-4805SAW 18-75 5 1000 145 76 1000 RP05-4812SAW 18-75 12 470 155 80 220 RP05-4815SAW 18-75 15 400 167 79 150 RP05-2405DAW 9-36 ±5 ±500 282 78 ±680 RP05-2412DAW 9-36 ±12 ±230 295 82 ±100 RP05-2415DAW 9-36 ±15 ±190 313 80 ±68 RP05-4805DAW 18-75 ±5 ±500 145 76 ±680 RP05-4812DAW 18-75 ±12 ±230 151 80 ±100 RP05-4815DAW 18-75 ±15 ±190 159 79 ±68 ** add Suffix SMD for SMD package The AW-Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them ideal for all Telecom and safety applications where approved isolation is required. They also meet UL 1950 and CSA 950 standards. /MT49/MT50/MT53 /MT55/MT53 /MT53/MT48 /MT50/MT53 /MT48 /MT49/MT48/MT48 /MT65/MT109/MT98/MT105/MT101/MT110/MT116/MT32/MT84/MT101/MT109/MT112/MT101/MT114/MT97/MT116/MT117/MT114/MT101/MT32/MT82/MT97/MT110/MT103/MT101/MT32/MT40/MT176/MT67/MT41 /MT45/MT50/MT53 /MT45/MT49/MT48 /MT48 /MT53/MT48 /MT54/MT48 /MT55/MT48 /MT56/MT48 /MT57/MT48 /MT49/MT48/MT48 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT80/MT111/MT119/MT101/MT114/MT32/MT40/MT37/MT41 /MT78/MT97/MT116/MT117/MT114/MT97/MT108/MT32/MT67/MT111/MT110/MT118/MT101/MT99/MT116/MT105/MT111/MT110 RP05-2415DAW Derating-Graph (Ambient Temperature)
www.recom-international.com 195April-2005 Input Voltage Range 24V nominal input 9-36VDC 48V nominal input 18-75VDC Input Filter Pi Type Input Surge Voltage (100 ms max.) 12V Input 36VDC 24V Input 50VDC 48V Input 100VDC Input Reflected Ripple (nominal Vin and full load) 20mAp-p Start Up Time (nominal Vin and constant resistor load) 600ms typ. Output Power 5W max. Output Voltage Accuracy (full Load and nominal Vin) ±2% Minimum Load (see Note 1) 10% of FL Line Regulation (LL-HL at full load) ±0.2% Load Regulation (25% to 100% FL) Single ±0.2% Dual ±1% Cross Regulation (asymmetrical load 25%/100% FL) ±5% Ripple and Noise (20MHz bandwith) 50mVp-p Temperature Coefficient ±0.02%/°C, max. Transient Response (25% load step change) 200µS Over Load Protection (% of full load at nominal Vin) 170% typ Short Circuit Protection Continuous, automatic recovery Efficiency see „Selection Guide“ table continued on next page Specifications (typical at nominal input and 25°C unless otherwise noted) POWERLINE DC/DC-Converter RP05-S_DAW Series /MT49/MT50/MT53 /MT55/MT53 /MT53/MT48 /MT50/MT53 /MT48 /MT49/MT48/MT48 /MT65/MT109/MT98/MT105/MT101/MT110/MT116/MT32/MT84/MT101/MT109/MT112/MT101/MT114/MT97/MT116/MT117/MT114/MT101/MT32/MT82/MT97/MT110/MT103/MT101/MT32/MT40/MT176/MT67/MT41 /MT45/MT52/MT48/MT45/MT50/MT53/MT45/MT49/MT48 /MT48 /MT53/MT48 /MT54/MT48 /MT55/MT48 /MT56/MT48 /MT57/MT48 /MT49/MT48/MT48 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT80/MT111/MT119/MT101/MT114/MT32/MT40/MT37/MT41 /MT55/MT55 /MT78/MT97/MT116/MT117/MT114/MT97/MT108/MT32/MT67/MT111/MT110/MT118/MT101/MT99/MT116/MT105/MT111/MT110 /MT49/MT50/MT53 /MT55/MT53 /MT53/MT48 /MT50/MT53 /MT48 /MT49/MT48/MT48 /MT65/MT109/MT98/MT105/MT101/MT110/MT116/MT32/MT84/MT101/MT109/MT112/MT101/MT114/MT97/MT116/MT117/MT114/MT101/MT32/MT82/MT97/MT110/MT103/MT101/MT32/MT40/MT176/MT67/MT41 /MT45/MT52/MT48/MT45/MT50/MT53/MT45/MT49/MT48 /MT48 /MT53/MT48 /MT54/MT48 /MT55/MT48 /MT56/MT48 /MT57/MT48 /MT49/MT48/MT48 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT80/MT111/MT119/MT101/MT114/MT32/MT40/MT37/MT41 /MT78/MT97/MT116/MT117/MT114/MT97/MT108/MT32/MT67/MT111/MT110/MT118/MT101/MT99/MT116/MT105/MT111/MT110 RP05-4805SAW/M2 RP05-2415DAW/M2 Derating-Graph (Ambient Temperature) Derating graphes are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at inf o@recom-development.at
196 www.recom-international.comApril-2005 Specifications (typical at nominal input and 25°C unless otherwise noted) Notes : POWERLINE DC/DC-Converter RP05-S_DAW Series Isolation Voltage In to out 1.600VDC min. I/O to case DIP type 1.600VDC min. I/O to case SMD type 1.000VDC min. Isolation Resistance 109 Ω min. Isolation Capacitance 300pF max. Operating Frequency 300kHz typ. Approved to Safety Standards UL 1950, EN60950 Operating Temperature Range Standard -25°C to +85°C (with derating) M2 (see note 3) -40°C to +85°C (with derating) Maximum Case Temperature +100°C Storage Temperature Range -55°C to +105°C Thermal Impedance Natural convection 20°C/Watt Thermal Shock MIL-STD-810D Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Nickel-Coated copper Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) Conducted Emissions EN55022 Level A Radiated Emissions EN55022 Level A ESD EN61000-4-2 Perf. Criteria 2 Radiated Immunity EN61000-4-3 Perf. Criteria 2 Fast Transient EN61000-4-4 Perf. Criteria 2 Surge EN61000-4-5 Perf. Criteria 2 Conducted Immunity EN61000-4-6 Perf. Criteria 2 Weight DIP 16g SMD 18g Dimensions DIP 31.8 x 20.3 x 10.2mm SMD 32.0 x 20.3 x 10.9mm MTBF (see note 2) 3.165 x 106 Hours 1. The RP05 AW series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load c ondition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40 °C (Ground fixed and controlled environment). 3. M2 version is more efficient, therefore, it can be operated in a more extensive temperature range than the standard version. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. Simulated source impedance of 12uH. 12uH inductor on series with +Vin. 8. See application notes for EMI-filtering.
www.recom-international.com 197April-2005 RP05-S_DAW Series Package Style and Pinning (mm) /MT53/MT46/MT49/MT48 /MT49/MT55/MT46/MT56/MT48 /MT52/MT46/MT54/MT48 /MT49/MT48/MT46/MT50/MT48 /MT48/MT46/MT50/MT53/MT32/MT120/MT32/MT48/MT46/MT53/MT48 /MT82/MT101/MT99/MT116/MT97/MT110/MT103/MT117/MT108/MT97/MT114/MT32/MT80/MT105/MT110 /MT49/MT53/MT46/MT50/MT48 /MT66/MT111/MT116/MT116/MT111/MT109/MT32/MT86/MT105/MT101/MT119 /MT50/MT32/MT32/MT32/MT51 /MT50/MT48/MT46/MT51/MT48/MT51/MT49/MT46/MT56/MT48 /MT32/MT57/MT32/MT32/MT32/MT32/MT32/MT32/MT49/MT49 /MT49/MT54/MT32/MT32/MT32/MT32/MT32/MT49/MT52/MT50/MT51/MT32/MT50/MT50 /MT51/MT46/MT56 /MT50/MT48/MT46/MT51/MT48 /MT32/MT57/MT49/MT48/MT49/MT49/MT49/MT50 /MT50/MT52/MT50/MT51/MT50/MT50 /MT49/MT54/MT49/MT53/MT49/MT52/MT49/MT51/MT50/MT49/MT50/MT48 /MT49 /MT51/MT50/MT53/MT52 /MT49 /MT51/MT49/MT46/MT52/MT48 /MT50/MT53/MT46/MT52/MT48 /MT49/MT48/MT46/MT57/MT48 /MT66/MT111/MT116/MT116/MT111/MT109/MT32/MT86/MT105/MT101/MT119 /MT49/MT49/MT32/MT120/MT32/MT50/MT46/MT53/MT52 /MT80/MT105/MT110/MT32/MT97/MT114/MT101/MT97 /MT48/MT46/MT49/MT32/MT120/MT32/MT48/MT46/MT53/MT48/MT48/MT46/MT53/MT48 /MT51/MT50/MT46/MT48/MT48 /MT49/MT49/MT46/MT50/MT48 /MT50/MT46/MT53/MT52 /MT50/MT52/MT46/MT49/MT52 /MT50/MT55/MT46/MT57/MT52 /MT50/MT54/MT46/MT53/MT52 /MT49/MT46/MT54/MT48 /MT50/MT46/MT52/MT48 /MT84/MT111/MT112/MT32/MT86/MT105/MT101/MT119 /MT50/MT49/MT46/MT51/MT48/MT51/MT46/MT56/MT49/MT54/MT46/MT51/MT53 /MT50/MT46/MT53/MT52 /MT50/MT51/MT46/MT52/MT48 POWERLINE DC/DC-Converter /MT51/MT114/MT100/MT32/MT97/MT110/MT103/MT108/MT101 /MT112/MT114/MT111/MT106/MT101/MT99/MT116/MT105/MT111/MT110 Pin Connections Pin # Single Dual 2– V in –Vin 3– V in –Vin
9 NC Com
11 NC –V out
16 –V out Com 22 +V in +Vin 23 +V in +Vin NC = No Connection Pin Pitch Tolerance ±0.35 mm Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. Pin Connections Pin # Single Dual 2– V in –Vin 3– V in –Vin
10 NC NC
15 NC NC
16 –V out Com 22 +V in +Vin 23 +V in +Vin Others NC NC NC = No Connection Pin Pitch Tolerance ±0.35 mm