RP03-053.3SE RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

Selection Guide 5V, 12V, 24V and 48V Input Types Part Number Input Output Output Input (4) Efficiency(5) Capacitive(6) Range Voltage Current Current Load max. DIP24 (SMD) VDC VDC mA mA % µF RP03-053.3SE 4.5-6 3.3 600 638 66 2200 RP03-0505SE 4.5-6 5 600 910 70 1000 RP03-0512SE 4.5-6 12 250 845 75 170 RP03-0515SE 4.5-6 15 200 845 75 110 RP03-123.3SE 9-18 3.3 600 252 70 2200 RP03-1205SE 9-18 5 600 352 75 1000 RP03-1212SE 9-18 12 250 334 79 170 RP03-1215SE 9-18 15 200 334 79 100 RP03-243.3SE 18-36 3.3 600 126 70 2200 RP03-2405SE 18-36 5 600 174 76 1000 RP03-2412SE 18-36 12 250 165 80 170 RP03-2415SE 18-36 15 200 165 80 100 RP03-483.3SE 36-75 3.3 600 61 72 2200 RP03-4805SE 36-75 5 600 88 75 1000 RP03-4812SE 36-75 12 250 84 79 170 RP03-4815SE 36-75 15 200 84 79 100 RP03-0505DE 4.5-6 ±5 ±300 870 73 ±500 RP03-0512DE 4.5-6 ±12 ±125 845 75 ±96 RP03-0515DE 4.5-6 ±15 ±100 870 73 ±47 RP03-1205DE 9-18 ±5 ±300 357 74 ±500 RP03-1212DE 9-18 ±12 ±125 334 79 ±96 RP03-1215DE 9-18 ±15 ±100 334 79 ±47 RP03-2405DE 18-36 ±5 ±300 174 76 ±500 RP03-2412DE 18-36 ±12 ±125 167 79 ±96 RP03-2415DE 18-36 ±15 ±100 167 79 ±47 RP03-4805DE 36-75 ±5 ±300 86 77 ±500 RP03-4812DE 36-75 ±12 ±125 84 79 ±96 RP03-4815DE 36-75 ±15 ±100 84 79 ±47 ** add Suffix SMD for SMD package

Description

The E-Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them ideal for all Telecom and safety applications where approved isolation is required. They also meet UL 1950 and CSA 950 standards.

www.recom-international.com 183April-2005 Selection Guide 5V, 12V, 24V and 48V Input Types Specifications (typical at nominal input and 25°C unless otherwise noted) POWERLINE DC/DC-Converter RP03-S_DE (DE/DS) Series /MT49/MT50/MT53 /MT55/MT53 /MT53/MT48 /MT50/MT53 /MT48 /MT49/MT48/MT48 /MT65/MT109/MT98/MT105/MT101/MT110/MT116/MT32/MT84/MT101/MT109/MT112/MT101/MT114/MT97/MT116/MT117/MT114/MT101/MT32/MT82/MT97/MT110/MT103/MT101/MT32/MT40/MT176/MT67/MT41 /MT45/MT50/MT53 /MT45/MT49/MT48 /MT48 /MT53/MT48 /MT54/MT48 /MT55/MT48 /MT56/MT48 /MT57/MT48 /MT49/MT48/MT48 /MT79/MT117/MT116/MT112/MT117/MT116/MT32/MT80/MT111/MT119/MT101/MT114/MT32/MT40/MT37/MT41 /MT55/MT49 /MT78/MT97/MT116/MT117/MT114/MT97/MT108/MT32/MT67/MT111/MT110/MT118/MT101/MT99/MT116/MT105/MT111/MT110 RP03-4805SE Input Voltage Range 5V nominal input 4.5-6VDC 12V nominal input 9-18VDC 24V nominal input 18-36VDC 48V nominal input 36-75VDC Input Filter Pi Type Input Surge Voltage (100 ms max.) 5V Input 15VDC 12V Input 36VDC 24V Input 50VDC 48V Input 100VDC continued on next page Part Number Input Output Output Input (4) Efficiency(5) Capacitive(6) Range Voltage Current Current Load max. for DE/DS(V1 & V2) V1 & V2 V1 & V2 V1 & V2 DIP24 (SMD) VDC VDC mA mA % µF RP03-0505DE/DS 4.5-6 5 / 5 300 / 300 870 73 500 / 500 RP03-0512DE/DS 4.5-6 12 / 12 125 / 125 845 75 96 / 96 RP03-0515DE/DS 4.5-6 15 / 15 100 / 100 870 73 47 / 47 RP03-1205DE/DS 9-18 5 / 5 300 / 300 357 74 500 / 500 RP03-1212DE/DS 9-18 12 / 12 125 / 125 334 79 96 / 96 RP03-1215DE/DS 9-18 15 / 15 100 / 100 334 78 47 / 47 RP03-2405DE/DS 18-36 5 / 5 300 / 300 174 76 500 / 500 RP03-2412DE/DS 18-36 12 / 12 125 / 125 167 79 96 / 96 RP03-2415DE/DS 18-36 15 / 15 100 / 100 167 79 47 / 47 RP03-4805DE/DS 36-75 5 / 5 300 / 300 86 77 500 / 500 RP03-4812DE/DS 36-75 12 / 12 125 / 125 84 79 96 / 96 RP03-4815DE/DS 36-75 15 / 15 100 / 100 84 79 47 / 47 ** add Suffix SMD for SMD package Derating-Graph (Ambient Temperature) Derating graphes are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at inf o@recom-development.at

184 www.recom-international.comApril-2005 Specifications (typical at nominal input and 25°C unless otherwise noted) POWERLINE DC/DC-Converter RP03-S_DE (DE/DS) Series Input Reflected Ripple (nominal Vin and full load) 120mAp-p Start Up Time (nominal Vin and constant resistor load) 30ms typ. Output Power 3W max. Output Voltage Accuracy (full Load and nominal Vin) ±2% Minimum Load (see Note 1) 10% of FL Line Regulation (LL-HL at full load) ±0.2% DS ±0.5% Load Regulation (25% to 100% FL) Single ±0.2% Dual ±2% DS ±0.5% Cross Regulation (asymmetrical load 25%/100% FL) ±5% Ripple and Noise (20MHz bandwith) 3.3V, 5V 75mVp-p others 1%/p-p of Vout max. Temperature Coefficient ±0.02%/°C, max. Transient Response (25% load step change) 500µS Over Load Protection (% of full load at nominal Vin) 180% typ Short Circuit Protection Continuous, automatic recovery Efficiency see „Selection Guide“ table Isolation Voltage In to out 1.600VDC min. Output to Output /DS type 500VDC min. Isolation Resistance 109 Ω min. Isolation Capacitance 300pF max. Operating Frequency 100kHz min. Approved to Safety Standards UL 1950, EN60950 Operating Temperature Range -25°C to +71°C Storage Temperature Range -55°C to +105°C Vibration 10-55Hz, 2G, 30 Min. along X, Y and Z Relative Humidity 5% to 95% RH Case Material Non-conductive black plastic Base Material Non-conductive black plastic Potting Material Epoxy (UL94-V0) Conducted Emissions EN55022 Level A Radiated Emissions EN55022 Level A ESD EN61000-4-2 Perf. Criteria 2 Radiated Immunity EN61000-4-3 Perf. Criteria 2 Fast Transient EN61000-4-4 Perf. Criteria 2 Surge EN61000-4-5 Perf. Criteria 2 Conducted Immunity EN61000-4-6 Perf. Criteria 2 Weight DIP 14g SMD 15g Dimensions DIP 31.8 x 20.3 x 10.2mm SMD 32.0 x 20.3 x 10.9mm MTBF (see note 2) 3.706 x 106 Hours

www.recom-international.com 185April-2005 POWERLINE DC/DC-Converter Notes : RP03-S_DE (DE/DS) Series Notes : 1. The RP03 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment). 3. Should an O/O isolation be required, please order the converter with the following part number: RP03-XXXXDE/DS. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. See application notes for EMI-filtering. /MT50/MT46/MT53/MT52 /MT50/MT50/MT46/MT57/MT48 /MT50 /MT49/MT48/MT46/MT50/MT48 /MT48/MT46/MT50/MT53/MT32/MT120/MT32/MT48/MT46/MT53/MT48 /MT82/MT101/MT99/MT116/MT97/MT110/MT103/MT117/MT108/MT97/MT114/MT32/MT80/MT105/MT110 /MT49/MT53/MT46/MT50/MT48 /MT66/MT111/MT116/MT116/MT111/MT109/MT32/MT86/MT105/MT101/MT119 /MT49/MT32/MT32/MT32/MT50/MT32/MT32/MT32/MT51 /MT50/MT48/MT46/MT51/MT48/MT51/MT49/MT46/MT56/MT48 /MT49/MT48/MT32/MT49/MT49/MT32/MT49/MT50 /MT49/MT53/MT32/MT49/MT52/MT32/MT49/MT51/MT50/MT52/MT32/MT50/MT51/MT32/MT50/MT50 /MT51/MT46/MT56 /MT51/MT114/MT100/MT32/MT97/MT110/MT103/MT108/MT101 /MT112/MT114/MT111/MT106/MT101/MT99/MT116/MT105/MT111/MT110 Pin Pitch Tolerance ±0.35 mm /MT50/MT48/MT46/MT51/MT48 /MT32/MT57/MT49/MT48/MT49/MT49/MT49/MT50 /MT50/MT52/MT50/MT51/MT50/MT50 /MT49/MT54/MT49/MT53/MT49/MT52/MT49/MT51/MT50/MT49/MT50/MT48 /MT49 /MT51/MT50/MT53/MT52 /MT49 /MT51/MT49/MT46/MT52/MT48 /MT50/MT53/MT46/MT52/MT48 /MT49/MT48/MT46/MT57/MT48 /MT66/MT111/MT116/MT116/MT111/MT109/MT32/MT86/MT105/MT101/MT119 /MT49/MT49/MT32/MT120/MT32/MT50/MT46/MT53/MT52 /MT80/MT105/MT110/MT32/MT97/MT114/MT101/MT97 /MT48/MT46/MT49/MT32/MT120/MT32/MT48/MT46/MT53/MT48/MT48/MT46/MT53/MT48 /MT51/MT50/MT46/MT48/MT48 /MT49/MT49/MT46/MT50/MT48 /MT50/MT46/MT53/MT52 /MT50/MT52/MT46/MT49/MT52 /MT50/MT55/MT46/MT57/MT52 /MT50/MT54/MT46/MT53/MT52 /MT49/MT46/MT54/MT48 /MT50/MT46/MT52/MT48 /MT84/MT111/MT112/MT32/MT86/MT105/MT101/MT119 /MT50/MT49/MT46/MT51/MT48/MT51/MT46/MT56/MT49/MT54/MT46/MT51/MT53 /MT50/MT46/MT53/MT52 /MT50/MT51/MT46/MT52/MT48 Same spec. as the original DIP spec. and pin definition, excl. of the SMD type pin. Pin Connections Pin # Single Dual Dual Separate 1 + V in + V in + V in

2 NC – V out – V1 out

3 NC Com + V1 out

10 - V out Com – V2 out 11 + V out + V out + V2 out 12 – V in – V in – V in 13 – V in – V in – V in 14 + V out + V out + V2 out 15 - V out Com – V2 out

22 NC Com + V1 out

23 NC - V out – V1 out

NC = No Connection Pin Pitch Tolerance ±0.35 mm Pin Connections Pin # Single Dual Dual Separate 1 + V in + V in + V in 10 - V out Com – V2 out 11 + V out + V out + V2 out 12 – V in – V in – V in 13 – V in – V in – V in 14 + V out + V out + V2 out 15 - V out Com – V2 out NC = No Connection