RMB2S GE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

MINIATURE GLASS PASSIVATED SINGLE-PHASE SURFACE MOUNT FAST RECOVERY BRIDGE RECTIFIER Reverse Voltage -200 to 400 Volts Forward Current -0.5 Ampere

FEATURES

¤ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ¤ This series is UL recognized under Component Index, file number E54214 ¤ Glass passivated chip junctions ¤ High surge overload rating: 35A peak ¤ Saves space on printed circuit boards ¤ Fast recovery, low loss switching ¤ High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs. (2.3kg) tension MECHANICAL DATA Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on body Mounting Position:Any Weight:0.0078 ounce, 0.22 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS RMB2S RMB4S UNITS Device marking code R2 R4 Maximum repetitive peak reverse voltage V RRM 200 400 Volts Maximum RMS voltage V RMS 140 280 Volts Maximum DC blocking voltage V DC 200 400 Volts Maximum average forward output rectified current at TA=30°C - on glass-epoxy P.C.B. (NOTE 1) I(AV) 0.5 Amp - on aluminum substrate (NOTE 2) 0.8 Peak forward surge current 8.3msec single half sine- wave superimposed on rated load (JEDEC Method) IFSM 30.0 Amps Rating for fusing (t<8.3ms) I 2t 5.0 A 2sec Maximum instantaneous forward voltage drop per leg at 0.4A VF 1.25 Volts Maximum DC reverse current at T A=25°C 5.0 rated DC blocking voltage per leg T A=125°C IR 100 Maximum reverse recovery time (NOTE 3) trr 150 ns Typical junction capacitance per leg (NOTE 4) C J 13.0 pF Typical thermal resistance per leg (NOTE 1) R Q JA 85.0 (NOTE 2) R Q JA 70.0 °C/W (NOTE 1) R Q JL 20.0 Operating junction and storage temperature range T J, TSTG -55 to +150 °C NOTES: (3) Reverse recovery test conditions: I F=0.5A, IR =1.0A, Irr=0.25A (4) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts 0.029 (0.74) 0.017 (0.43) 0-8 o 0.049 (1.24) 0.039 (0.99) 0.062 (1.57) 0.058 (1.47) 0.016 (0.41) 0.006 (0.15) 0.018 (0.46) 0.014 (0.36) 0.008 (0.20) 0.004 (0.10) 0.117 (2.97) 0.107 (2.72) 0.058 (1.47) 0.054 (1.37) 0.252 (6.40) 0.272 (6.90) 0.106 (2.70) 0.090 (2.30) 0.0075 (0.19) 0.0065 (0.16) 0.105 (2.67) 0.095 (2.41) 0.195 (4.95) 0.179 (4.55) 0.144 (3.65) 0.161 (4.10) 0.205 (5.21) 0.195 (4.95) 4 (2.90) 4 (2.40) 0.038 (0.96) 0.019 (0.48) Case Style MBS Dimensions in inches and (millimeters) PATENT PENDING PATENT PENDING PATENT PENDING 9/8/98

5.0 02 0 40 60 80 100 120 140 160 0.01 0.1 100 0.01 0.1 0.1 1 10 100 5.0 200 0 20 40 60 80 100 120 140 160 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 RATINGS AND CHARACTERISTIC CURVES RMB2S THRU RMB4S FIG. 1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT AMBIENT TEMPERATURE, °C PEAK FORWARD SURGE CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG NUMBER OF CYCLES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 3 - TYPICAL FORWARD VOLTAGE CHARACTERISTICS PER LEG FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES JUNCTION CAPACITANCE, pF INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % REVERSE VOLTAGE, VOLTS TA=40°C SINGLE HALF SINE-WAVE (JEDEC Method) TJ=125°C TJ=25°C TJ=25°C f=1.0 MHz Vsig=50mVp-p TJ=150°C TJ=25°C PULSE WIDTH=300 ms 1% DUTY CYCLE f=60 HZ f=50 HZ1.0 CYCLE GLASS EPOXY P.C.B. RESISTIVE OR INDUCTIVE LOAD