RLT820-100MGS ROITHNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

www.roithner-laser.com 1 RLT820-100MGS

  • IR Laser Diode
  • 820 nm, 100 mW
  • Single Transverse Mode
  • 5.6 mm TO Package, Flat Window

Description

RLT820-100MGS is an infrared laser diode, typically emitting at 820 nm. It features single mode emission and operating temperature range of up to 50°C. RLT820-100MGS comes in 5.6 mm TO-Can package with integrated monitor PD. Maximum Rating* Parameter Symbol Values Unit Min. Max. Reverse Voltage VR 2 V PD Reverse Voltage VRPD 25 V Operating Temperature* TOPR - 20 + 50 °C Storage Temperature* TSTG - 40 + 85 °C Soldering Temperature (3 s) TSOL + 260 °C * operating close to or outside these conditions may damage the device Electro-Optical Characteristics (TCASE = 25°C) Parameter Symbol Values Unit Min. Typ. Max. Peak Wavelength λP 810 820 830 nm Spectral Width λΔ 3.0 nm Optical Output Power PO 100 mW Operating Voltage VF 2.2 2.7 V Threshold Current Ith 30 60 mA Operating Current IF 160 180 mA Slope Efficiency η 0.85 W/A Monitor Current IM 0.5 mA Beam Divergence (FWHM) parallel ӨII 8 deg. perpendicular Ө┴ 30 deg.

www.roithner-laser.com 2 Electrical Connection Pin Configuration Bottom View Outline Dimensions 5.6 mm TO-Can All dimensions in mm Precautions Safety Laser light emitted from any laser diode may be harmful to the human eye. Avoid looking directly into the laser diode’s aperture. The use of optical lenses will increase eye hazard ESD Caution Always do handle laser diodes with care to prevent electrostatic discharge. We advise to wearing wrist straps, and grounding all applicable work surfaces, when handling laser diodes Operating Considerations Usage of current regulated drive circuits is mandatory We advise to operate this laser diode with a current source and heat sink, and to never exceed the maximum specifications as outlined in this datasheet. © All Rights Reserved The above specifications are for reference purpose only and subjected to change without prior notice. Pin # Function Pin 1 LD Cathode Pin 2 LD Anode, PD Cathode Pin 3 PD Anode