DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
www.roithner-laser.com 1 RLT1310- 20MGS
- Infrared DFB Laser Diode
- 1310 nm, 20 mW
- Single transverse mode
- 5.6mm TO-Can with Flat Window Maximum Rating* (TCASE = 25°C) Parameter Symbol Values Unit Min. Max. Reverse Voltage VR 2 V Operating Temperature* TOPR - 20 + 50 °C Storage Temperature* TSTG - 40 + 85 °C Soldering Temperature (max. 3s) TSOL + 260 °C * operating close to or outside these conditions may damage the device Electro-Optical Characteristics (TCASE = 25°C) Parameter Symbol Values Unit Min. Typ. Max. Peak Wavelength λP 1300 1310 1320 nm Optical Output Power PO 30 mW Spectral Width (FWHM) λ 3 nm Operating Voltage VF 1.4 V Threshold Current Ith 10 mA Operating Current IF 75 mA Beam Divergence (FWHM) parallel ӨII 9 deg. perpendicular Ө┴ 20 deg. PD Current IM 1 mA Electrical Connection Pin Configuration Bottom View
Description
RLT1310-20MGS is an infrared distributed feedback (DFB) laser diode, with single transverse mode emission at typically 1310 nm and low operating current. RLT1310-20MGS comes in 5.6 mm TO-Can with flat window and integrated PD. Pin # Function Pin 1 PD anode Pin 2 LD anode Pin 3 LD cathode Pin 4 PD cathode 18.10.17
www.roithner-laser.com 2 Outline Dimensions All dimensions in mm Precautions Safety Caution: Laser light emitted from any laser diode may be harmful to the human eye. Avoid looking directly into the laser diode’s aperture when the diode is in operation. Note: The use of optical lenses with this laser diode will increase eye hazard ESD caution Always do handle laser diodes with extreme care to prevent electrostatic discharge, the primary cause of unexpected diode failure. To prevent ESD related failures, it is strongly advised to always wearing wrist straps, and grounding all applicable work surfaces, when handling laser diodes Operating Considerations It is strongly advised to only operate this laser diode with a current source. The current of a laser diode is an exponential function of the voltage across it. Usage of current regulated drive circuits is mandatory. Laser diodes may be damaged by excessive drive currents or switching transients It is advised, to operat e the laser diode at the lowest temperature possible, and to never exceed maximum specifications as outlined in the datasheet . Device degradation will accelerate with increased temperature. Proper heat sinking will greatly enhance stability and life time of the laser diode © All Rights Reserved The above specifications are for reference purpose only and subjected to change without prior notice.