RL1N1X00F HORNBY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
产 品 规 格 确 认 书 PHOTOFLASH FAST RECOVERY RECTIFIER
PHOTOFLASH FAST RECOVERY RECTIFIER REVERSE VOLTAGE: 1000 to 1800 VOLTS FORWARD CURRENT: 0.5 AMPERE
FEATURES
- Low leakage A-405
- Low forward voltage drop
- High current capability
- High reliability MECHANICAL DATA Case: Molded plastic, A-405 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.008ounce, 0.22gram Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60HZ, resistive or inductive load. For capacitive load, derate current by 20%. Symbols RL1N1000F RL1N1200F RL1N1400F RL1N1600F RL1N1800F Units Maximum Recurrent Peak Reverse Voltage VRRM 1000 1200 1400 1600 1800 Volts Maximum RMS Voltage VRMS 700 840 980 1120 1260 Volts Maximum DC Blocking Voltage VDC 1000 1200 1400 1600 1800 Volts Maximum Average Forward Rectified Current at TA=55℃ Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 0.5A DC and 25℃ Maximum Reverse Current at Rated DC Blocking Voltage T A=25℃ Maximum Full Load Reverse Current Average, Full Cycle .375”, (9.5mm) lead length at TL = 55℃ Typical Junction Capacitance (Note 1) CJ pF Maximum Reverse Recovery Time (Note 2) TRR nS Operating and Storage Temperature Range TJ，Tstg ℃ NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Reverse Recovery Test Conditions：IF=.5A，IR=1A，IRR=.25A. Dimensions in inches and (millimeters) 1.8 -55 to +150 300 100 5.0 IR uAmp Amp Amp Volts uAmp I (AV) IFSM VF 0.5
PHOTOFLASH FAST RECOVERY RECTIFIER RATINGS AND CHARACTERISTIC CURVES