RL160X HORNBY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
确 认 书 GLASS PASSIVATED SILICON RECTIFIER 产 品 规 格
GLASS PASSIVATED SILICON RECTIFIER REVERSE VOLTAGE: 50 to 1000 VOLTS FORWARD CURRENT: 16.0 AMPERE
FEATURES
- Low forward voltage drop TO-220A
- High current capability
- High capability
- High surge current capability MECHANICAL DATA Case: Molded plastic, TO-220A Epoxy: UL 94V-O rate flame retardant Terminals: Leads solderable per MIL-STD-202 method 208 guaranteed Polarity: As marked Mounting position: Any Weight: 0.08ounce, 2.24gram Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60HZ, resistive or inductive load. For capacitive load, derate current by 20%. Symbols RL1601 RL1602 RL1603 RL1604 RL1605 RL1606 RL1607 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at T C=100℃ Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 16.0A DC and 25℃ Maximum Reverse Current at T C=25℃ at Rated DC Blocking Voltage TC=125℃ Typical Junction Capacitance (Note 1) CJ pF Typical Thermal Resistance (Note 2) RθJC ℃/W Operating and Storage Temperature Range TJ，Tstg ℃ NOTES: 1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC. 2- Thermal Resistance from Junction to Case Mounted on Heatsink. Amp Amp Volts uAmp 1.1 I(AV) IFSM VF 16.0 250 IR -55 to +150 10.0 250 100 Dimensions in inches and (millimeters)
GLASS PASSIVATED SILICON RECTIFIER RATINGS AND CHARACTERISTIC CURVES