RL0603D ULC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
100W ~ 250W AC-DC SWITCHING POWER SUPPLY RL0603D DUAL OUTPUT SERIES FEATURES: ◆ Compact 250W with 1U height Power Density: 10.4 watts/cu in. ◆ Low Leakage Current 500uA @ 240Vac / 300uA @ 120Vac ◆ U-Chassis & Enclosed with built-in fan Mechanical Options ◆ 3.3/ 5/ 12/ 24/ 48V Dual Output Optional Combinations ◆ Variable Fan Speed & Low Acoustical Noise ◆ High Quality & Reliable Component Usage ◆ Approved to UL CUL TUV CB and CE. ◆ AC Input Range Auto-Selectable ◆ Output Voltages from 2 ~ 60Vdc PRODUCT SPECIFICATIONS: Power Supply On: Green LED designated as LED1 on the PCB. Power Good: PG on CN1 goes high 100-500mS after DC regulation and low at least 1mS before loss of regulation (Open collector). Fan Drive: 12VDC/300mA is available to drive an external fan. EMC: EN55022 class B conducted / radiated, EN61000-3-2, EN61000-3-3; EN55024 (IEC61000-4-2, IEC61000-4-3, IEC61000-4- 4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-11). Safety Regulation: UL60950-1, EN60950-1, IEC60950-1. Leakage Current: < 1mA @ 264Vac. (optional for 500uA max. at 240Vac / 300uA max. at 120Vac input) HI-POT Withstand Voltage: 1500 VAC input line to chassis (10mA DC cut off current); Isolating 3000VAC primary to secondary windings; Primary to core 1500VAC. All for 3 sec. Grounding Test: Apply 25 A from ground pin of the three prong plug to the far most earth. Max allowable resistance 0.1 ohm. Warranty: 2 years. MTBF: 100000 Hrs (according to MIL-HBK-217F) at 30 degree C. Cooling: Type U (with min. 16CFM forced air) & F: Max. 250W total combined power of V1 and V2 for RL0603Dx-1224 and 200W for other models. Type U (with convection cooling): Max. 135W total combined power of V1 and V2 for RL0603DU-1224 and 100W for other models. Burn in: 45 +/- 5 degree C for 1 hour @230Vac with full load. Enclosure: RL0603DU Series (U-Chassis Type): 5(L) x 3.2(W) x 1.5(H) inches. RL0603DF Series (Enclosed Type): 5(L) x 3.2(W) x 2(H) inches. Weight: RL0603DU Series: 450g; RL0603DF Series: 550g. Input Voltage: 90-132 / 180-264Vac, 47-63Hz auto selectable. Input Current: 6/3A at 110-120 / 200-240VAC. Inrush Current: Max. 70A@230Vac & 35A@115Vac; cold start. PFC: Power factor corrected to EN61000-3-2 class A. Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change, peak does not excess 5%. Overshoot: Turn-on & off overshoot < 5% over nominal voltage. Efficiency: 75% ~ 85% depends on model. Turn On Delay: 1 second maximum at 230 Vac. Hold Up Time: 20mS min. at 80% of full load. Adjustability: Output user adjustable +/-5% minimum. Input Fusing Protection: One T8A/250V fuse inserted in primary. Over Voltage Protection: Unit latching down when output exceed 130% and recycle AC input to reset. Over-Power Protection: 110-140% of I-Max; Auto-recovery. Short Circuit Protection: Trip without damage and auto-recovery. Over-Temperature Protection: Unit protected of excessive operating ambient 110 ℃, and automatic recovery. Operating Temperature: 0℃ to 70℃ ambient, de-rating at 2.5% per degree from 50℃ to 70℃. Operating Humidity: 5% to 90% RH, Non-condensing. Storage Humidity: 5% to 95% RH, Non-condensing. Storage Temperature: -20 to 85 ℃. Vibration: 5 ~ 50 Hz, acceleration 7.35 m/s*s on X,Y and Z Axis. Switching Frequency: 25K Hz fixed frequency. Remote On-Off: Designated as RMSW on the CN1, requires a low signal to inhibit output. Hiccough mode. CB RL0603DU Series (U-Chassis Type): 5(L) x 3.2(W) x 1.5(H) inches. RL0603DF Series (Enclosed Type): 5(L) x 3.2(W) x 2(H) inches. Copy Right Ultra Level Tech Co., Ltd 2015, All Right Reserved. Specifications subject to change without notice. ULTRA LEVEL TECH CO., LTD. We Supply the Power Customers Need ISO9001 www.ultralevel.com.tw Tel:+886-2-29180118 Fax:+886-2-29181465
OUTPUT VOLTAGE / CURRENT RATING CHART: Measured at output power connector. OUTLINE DRAWING: NOTE: * RL0603D series are designated as RL0603Dx-y where x can be U (U-Chassis Type) or F (U-Chassis with Cover and built-in Fan installed); y can be 0312, 0324, 0512, 0524, 0548 and 1224. * Type U (with min. 16CFM forced air) & F: Max. 250W total combined power of V1 and V2 for RL0603Dx-1224 and 200W for other models. * Type U (with convection cooling): Max. 135W total combined power of V1 and V2 for RL0603DU-1224 and 100W for other models. * Ripple and noise is measured from 10KHZ to 20MHz bandwidth at output with parallel 0.1uF ceramic and 22uF electrolytic capacitors. * 10% minimum load is required for all outputs to maintain the ripple and regulation. * Output is fully isolated. RL0603DU Series (U-Chassis Type): 5(L) x 3.2(W) x 1.5(H) inches; Weight: 450g. Copy Right Ultra Level Tech Co., Ltd 2015, All Right Reserved. Specifications subject to change without notice. Model Number Output Voltage Max. Output Current Regulation Ripple & Noise Type U (with min. 16CFM forced air) & F Type U (Convection) RL0603Dx-0312 V1:+3.3V 24A 12A +/- 5% 50mV RL0603Dx-0324 V1:+3.3V 24A 12A +/- 5% 50mV RL0603Dx-0512 RL0603Dx-0524 RL0603Dx-0548 RL0603Dx-1224 ULTRA LEVEL TECH CO., LTD. We Supply the Power Customers Need ISO9001 www.ultralevel.com.tw Tel:+886-2-29180118 Fax:+886-2-29181465 INPUT OUTPUT
Copy Right Ultra Level Tech Co., Ltd 2015, All Right Reserved. Specifications subject to change without notice. RL0603DF Series (Enclosed with Top Fan Type): 5(L) x 3.2(W) x 2(H) inches; Weight: 550g. NOTES: Input Connector(CN3): Mating Molex Part No. 09-93-0500 or equivalent (5 pin, 3 used) PCB Labeling: L = Line; N = Neutral; G = Chassis Ground; Molex Engineering Series 2478, 2578, 8818 or Howder M3. 3 pin Terminal block 6.35MM Center (HD-601-3P). Output Connector (CN2): Mating Molex Part No. 09-93-0800. Mating Pins: Molex Engineering Series 2478, 2578, 8818. or Howder M3. 3 pin Terminal block 8.25MM Center (HD-816-3P). Connector Pin Assignment: (See table in right). Power Good, Remote On/Off mating connectors (CN1): Mating JST Part No. XHP-3 or equivalent (CHYAO SHIUNN JS-2001-03). Mating Pins: JST SXH-002T-P0.6 FOR AWG 30 to 26. Signal Pin Assignment: Pins 1 : Power good . Pins 2 : Remote Switch. Pins 3 : RTN. Fan Drive: Mating JST Part No. XHP-2 or equivalent (CHYAO SHIUNN JS-2001-02). Mounting Inserts: 7 Places M3. Maximum Penetration 3.8mm sees outline drawing for location. Molex Howder Pins 1: V2 Pins 1: V2 Pins 2-5: RTN Pins 2: RTN Pins 6-8: V1 Pins 3: V1 ULTRA LEVEL TECH CO., LTD. We Supply the Power Customers Need ISO9001 www.ultralevel.com.tw Tel:+886-2-29180118 Fax:+886-2-29181465