RL0603

RL0603 ULC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

135W ~ 250W AC-DC SWITCHING POWER SUPPLY RL0603 SINGLE OUTPUT SERIES FEATURES: ◆ Compact 250W with 1U height Power Density: 10.4 watts/cu in. ◆ U-Chassis & Enclosed with built-in fan Mechanical Options ◆ Low Leakage Current 500uA @ 240Vac / 300uA @ 120Vac ◆ Providing Peak Power 600W within 500uS duty duration ◆ Variable Fan Speed & Low Acoustical Noise ◆ High Quality & Reliable Component Usage ◆ Approved to UL CUL TUV CB and CE. ◆ AC Input Range Auto-Selectable ◆ Output Voltages from 2 ~ 60Vdc PRODUCT SPECIFICATIONS: Power Good: PG on CN1 goes high 100-500mS after DC regulation and low at least 1mS before loss of regulation (Open collector). Fan Drive: 12VDC/300mA is available to drive an external fan. Switching Frequency: 25K Hz fixed frequency. EMC: EN55022 class B conducted / radiated, EN61000-3-2, EN61000-3-3; EN55024 (IEC61000-4-2, IEC61000-4-3, IEC61000-4- 4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-11). Safety Regulation: UL60950-1, EN60950-1, IEC60950-1. Leakage Current: < 1mA @ 264Vac. (optional for 500uA max. at 240Vac / 300uA max. at 120Vac input) HI-POT Withstand Voltage: 1500 VAC input line to chassis (10mA DC cut off current); Isolating 3000VAC primary to secondary windings; Primary to core 1500VAC. All for 3 sec. Grounding Test: Apply 25 A from ground pin of the three prong plug to the far most earth. Max allowable resistance 0.1 ohm. Warranty: 2 years. MTBF: 100000 Hrs (according to MIL-HBK-217F) at 30 degree C. Cooling: RL0603U Series: 135W max. under air convection. 250W max. with min. 16CFM forced air flow. RL0603F Series: 250W max. with top built-in fan flow. Burn in: 45 +/- 5 degree C for 1 hour @230Vac with full load. Enclosure: RL0603U Series (U-Chassis Type): 5(L) x 3.2(W) x 1.5(H) inches. RL0603F Series (Enclosed Type): 5(L) x 3.2(W) x 2(H) inches. Weight: RL0603U Series: 400g; RL0603F Series: 500g. Input Voltage: 90-132 / 180-264Vac, 47-63Hz auto selectable. Input Current: 6/3A at 110-120 / 200-240VAC. Inrush Current: Max. 70A@230Vac & 35A@115Vac; cold start. PFC: Power factor corrected to EN61000-3-2 class A. Transient Response: Output voltage returns to within 1% in less than 2.5mS for a 50% load change, peak does not excess 5%. Overshoot: Turn-on & off overshoot < 5% over nominal voltage. Efficiency: 70% ~ 85% depends on model. Turn On Delay: 1 second maximum at 230 Vac. Hold Up Time: 20mS min. at 80% of full load. Adjustability: Output user adjustable +/-5% minimum. Input Fusing Protection: One T8A/250V fuse inserted in primary. Over Voltage Protection: Unit latching down when output exceed 130% and recycle AC input to reset. Over-Power Protection: 110-140% of I-Max; Auto-recovery. Short Circuit Protection: Trip without damage and auto-recovery. Over-Temperature Protection: Unit protected of excessive operating ambient 110 ℃, and automatic recovery. Operating Temperature: 0℃ to 70℃ ambient, de-rating at 2.5% per degree from 50℃ to 70℃. Operating Humidity: 5% to 90% RH, Non-condensing. Storage Humidity: 5% to 95% RH, Non-condensing. Storage Temperature: -20 to 85 ℃. Vibration: 5 ~ 50 Hz, acceleration 7.35 m/s*s on X,Y and Z Axis. Remote On-Off: Designated as RMSW on the CN1, requires a low signal to inhibit output. Hiccough mode. Power Supply On: Green LED designated as LED1 on the PCB. CB RL0603U Series (U-Chassis Type): 5(L) x 3.2(W) x 1.5(H) inches. RL0603F Series (Enclosed Type): 5(L) x 3.2(W) x 2(H) inches. ULTRA LEVEL TECH CO., LTD. We Supply the Power Customers Need ISO9001 www.ultralevel.com.tw Tel:+886-2-29180118 Fax:+886-2-29181465 Copy Right Ultra Level Tech Co., Ltd 2015, All Right Reserved. Specifications subject to change without notice.

OUTPUT VOLTAGE / CURRENT RATING CHART: Measured at output power connector. OUTLINE DRAWING: NOTE: * RL0603 series are designated as RL0603x-y where x can be U (U-Chassis Type) or F (U-Chassis with Cover and built-in Fan installed); y can be 05, 09, 12, 15, 18, 24, 28, 36, 48, 54. * RL0603U Series: 250W max. with min.16CFM forced air flow offering; 135W max. under air convection. * RL0603F Series: 250W max. with Top built-in Fan flow. * Providing peak power to 600W within 500uS for all models, longer duty duration need contact manufacturer. * Ripple and noise is measured from 10KHZ to 20MHz bandwidth at output with parallel 0.1uF ceramic and 22uF electrolytic capacitors. * 1% minimum load is required to maintain the ripple and regulation. * Output is fully isolated. RL0603U Series (U-Chassis Type): 5(L) x 3.2(W) x 1.5(H) inches; Weight: 400g. Copy Right Ultra Level Tech Co., Ltd 2015, All Right Reserved. Specifications subject to change without notice. Model Output Range Preset Voltage Max. Output Power or Current Regulation Ripple & Noise Type U (with min.16CFM forced air) & Type F Type U (Convection) RL0603x-05 2 ~ 5V 5V 40A 20A +/- 1% 1% RL0603x-09 6 ~ 10V 9 V 25A 13.5A +/- 1% 1% RL0603x-12 11 ~ 13.8V 12 V 250W 135W +/- 1% 1% RL0603x-15 14 ~ 15.5V 15 V 250W 135W +/- 1% 1% RL0603x-18 16 ~ 20V 18V 250W 135W +/- 1% 1% RL0603x-24 21 ~ 26V 24V 250W 135W +/- 1% 1% RL0603x-28 27 ~ 34V 28V 250W 135W +/- 1% 1% RL0603x-36 35 ~ 42V 36V 250W 135W +/- 1% 1% RL0603x-48 43 ~ 50V 48V 250W 135W +/- 1% 1% RL0603x-54 51 ~ 60V 54V 250W 135W +/- 1% 1% B B B ULTRA LEVEL TECH CO., LTD. We Supply the Power Customers Need ISO9001 www.ultralevel.com.tw Tel:+886-2-29180118 Fax:+886-2-29181465

Copy Right Ultra Level Tech Co., Ltd 2015, All Right Reserved. Specifications subject to change without notice. RL0603F Series (Enclosed with Top Fan Type): 5(L) x 3.2(W) x 2(H) inches; Weight: 500g. NOTES: Input Connector(CN3): Mating Molex Part No. 09-93-0500 or equivalent (5 pin, 3 used) PCB Labeling: L = Line; N = Neutral; G = Chassis Ground; Molex Engineering Series 2478, 2578, 8818 or Howder M3. 3 pin Terminal block 6.35MM Center (HD-601-3P). Output Connector (CN2): Mating Molex Part No. 09-93-0600. Mating Pins: Molex Engineering Series 2478, 2578, 8818. or Howder M3. 3 pin Terminal block 6.35MM Center (HD-601-4P) Mating JST Part No. XHP-2 or equivalent (CHYAO SHIUNN JS- 4001-06). Connector Pin Assignment: (See table in right). Power Good, Remote On/Off mating connectors (CN1): Mating JST Part No. XHP-3 or equivalent (CHYAO SHIUNN JS-2001-03). Mating Pins: JST SXH-002T-P0.6 FOR AWG 30 to 26. Signal Pin Assignment: Pins 1 : Power good . Pins 2 : Remote Switch. Pins 3 : RTN. Fan Drive: Mating JST Part No. XHP-2 or equivalent (CHYAO SHIUNN JS-2001-02). Mounting Inserts: 7 Places M3. Maximum Penetration 3.8mm sees outline drawing for location. Howder Molex Pins 1-2: V+ Pins 1-3: V+ Pins 3-4: V- Pins 4-6: V- ULTRA LEVEL TECH CO., LTD. We Supply the Power Customers Need ISO9001 www.ultralevel.com.tw Tel:+886-2-29180118 Fax:+886-2-29181465