RFP-2140-39-27N RFHIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
HHPPAA MMoodduullee RRFFPP--22114400--3399--2277NN ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 1.0 Product Features Application
- Solid-state linear design
- Small and light weight
- Suitable for UMTS
- 50 Ohm Input/Output impedance
- High reliability and ruggedness
- Built in Output Isolator
- Built in monitoring circuit
- High efficiency
- UMTS Repeater
Description
This HPA Module is a high gain, wide dynamic range amplifier module. It has superior performance comes with a modest price tag. Custom design available. Electrical Specifications @ VDD=+27VDC, T=25°C, 50Ω System PARAMETER Symbol Specification Frequency Range BW 2130 ~ 2150MHz Output Power P 39dBm/4FA Average max. SPECTRUM EMISSION MASK (WCDMA 4CARRIERS) SEM PER 3GPP TS-25.141 @+39dBm (WCDMA 2FA) ACLR (WCDMA 4 CARRIERS) @ Po=+39dBm max. ACLR < -51dBc @± 5MHz < -53dBc @±10MHz @ +26V ~ +28V @ +25°C RF Gain G 50dB ±1dB @frequency range, +27V , -20 ~ +70°C Gain Variation Over Dynamic Range ΔGTEMP ±1.0dB max. @ Po=+20dBm~+39dBm(△Pin:-20dB), 27V , +25℃ Normal Operating Voltage VDC +27V ±1V Gain Flatness ΔG Peak to peak 1.0 dB Over operating frequency Peak to peak 0.2 dB Over any 3.84MHz Input Return Loss S11/S22 -18dB min. Harmonics (2nd) H -50dBc (min) Current Consumption IDD 3.5A max. @+27V , +25℃, Po=+39dBm 4A max. @+27V , +25℃, Po=ALC point Operating Temperature To -20 ℃ ~ + 70℃ (Case temp) Over power Alarm OPA 41.5dBm±0.5dB Operating point 41.5dBm ± 0.5dB Input Power ALC ALC Operating range 15dB. Accuracy ±0.5dB ±0.5dB Po=+21dBm~+42dBm Detect Accuracy ±1dB Po=+0dBm~+10dBm EVM EVM less 2%
HHPPAA MMoodduullee RRFFPP--22114400--3399--2277NN ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 1.0 Pin assign(9 Pin D-sub) Pin # Description Specifications
1 Enable/disable Enable: TT L low, Disable: TTL high
2 Over power alarm Normal: short(under 300 Ω), Alarm: open, (@ Pout > 41.5dBm, Shutdown)
3 VSWR alarm Normal: short(under 300 Ω), Alarm: open (@ S22 > 3:1)
4 ALC alarm Normal: short(under 300 Ω), Alarm: open (@ ALC operating)
5 Output power monitor 0.0V~4.5V (-10dBm ~ 42dBm) @ 0 – 4.5V (80mV/dB)
6 Over temp, alarm Normal: short( under 300 Ω), Alarm: open, (@ Temp > 85℃)
8,9 GND Ground Connector type D-Sub connector 9PIN Male(Jack) (EMI Connector) Pin assign(3W3_male) A1. 27Vdc A2. GND Pin Description A3. NC RF Connector Input connector SMA type/ Female, 4 Hole RF Connector Output port SMA type/ Female, 4Hole Dimension(W * D * H) 160mm * 160mm * 25mm
HHPPAA MMoodduullee RRFFPP--22114400--3399--2277NN ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 1.0 OUTLINE DRAWING GND PWR NC +27V RF IN RF OUT I/O I/O O/P Alarm GND Power Monitor Enable/Disable ALC Alarm NC GND Over Temp Alarm VSWR Alarm
HHPPAA MMoodduullee RRFFPP--22114400--3399--2277NN ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 1.0 TYPICAL PERFORMANCE GAIN & GAIN FLATNESS S11 S22 ACLR 4FA@Pout=39dBm,Current=2.956A 2nd harmonic Spectrum Emission Mask (1FA)
HHPPAA MMoodduullee RRFFPP--22114400--3399--2277NN ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 1.0 Spectrum Emission Mask (2FA, Lower) Spectrum Emission Mask (2FA, Upper) EVM (1st FA) EVM (2nd FA) EVM (3rd FA) EVM (4th FA) RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time w ithout notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, inclu ding without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase or ders. RFHIC products are not intended for use in life support equipment or application where ma lfunction of the product can be expected to result in persona l injury or death. Buyer uses or sells such products for any such unintended or unauthorized applicatio n, buyer shall indemnify, protect and hold RFHIC and its direct ors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC.