DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

GaN Power Amp Pallet RFM245-10 Korean Facilities : 82-31-8069-3036 / rfsales@rfhic.com All specifications may change without notice US Facilities : 919-677-8780 / sales@rfhicusa.com 1 / 5 Version 1.2 Product Features Applications

  • 2450MHz CW 100W Generator
  • CW 100W Signal Generator For Medical machine
  • Digital Attenuator included (0.5dB step / Range 31.5dB)
  • Medical Machine

Description

This RF CW Tone Generator was ideally designed for Medical Equipment at its operating frequency of 2450MHz and the maximum output power of 50dBm. Originally built for treatment machines for early stage tumor patients that shows superb effectiveness. With a high reliability and excellent performance at a low cost, they can be implemented dependably on medical applications. Electrical Specifications PARAMETER UNIT MIN TYP MAX CONDITION Output Frequency MHz - 2450 - CW (±100KHz) Output Power Range dBm - 30 - +20 ~ +50 VSWR - - - 1.2 50ohm matching Forward Detector output V - 3.7 - @ Forward +50dBm Reflected Detector output (Open & Short) V - 3.7 - @ Forward +50dBm Power Efficiency % - 37 - - Attenuator accuracy dB - 0.3 0.8 HMC472LP4, 0.5dB step FAN* dB/A - - 140 FAN 4EA (FAN 1EA Noise Level 33.8dB/A) Temperature Alarm* ℃ - 75 - Over Temp. Alarm: High Gain Variation With Temp. dB -0.5 - +0.5 +10 ~ 35℃ (Only in-building) Consumption Current +40V A - 6.5 7.5 - Note *The amplifier can be provided without Heat Sink and DC Fan upon customer’s request. The part number for this case is RFMA245-10. *If the temperature above 75℃, this generator automatically shut down to protect itself. After temperature under 70℃, the generator wakes up and back to normal.

GaN Power Amp Pallet RFM245-10 Korean Facilities : 82-31-8069-3036 / rfsales@rfhic.com All specifications may change without notice US Facilities : 919-677-8780 / sales@rfhicusa.com 2 / 5 Version 1.2 Mechanical Specifications PARAMETER UNIT TYP REMARK Dimension ㎜ 150 × 290 × 92 - Power Connector Type & Pin Configurations 3W3PPH30120000 (+40V DC) D-SUB (3W3 Male) A1 : +40Vdc A1 A2 A3 A2 : GND A3 : NC I/O Signal Connector Type - D-Sub Connector 15pin (+12V DC (DC FAN) & Pout control) - Cooling - DC FAN (+12V) × 4EA - I/O Signal Connector Pin Descriptions Pin No. Descriptions I/O Note 1 8dB attenuation. I High: disable, Low: attenuation 2 4dB attenuation. I High: disable, Low: attenuation 3 2dB attenuation. I High: disable, Low: attenuation 4 1dB attenuation. I High: disable, Low: attenuation 5 0.5dB attenuation. I High: disable, Low: attenuation

6 RF Output Power Detection O Analog V oltage

7 RF Output Reflected Power Detection O Analog V oltage

8 High Temperature Alarm (Alarm @ above 75℃) O High: alarm, Low: Normal

9 RF signal on/off (amp. On/off) I High: disable, Low: enable

10 Ground (Separated GND(RF)) I -

11 DC 12V pin (FAN) I +12V ± 0.8V

12 Not Connected - -

13 16dB attenuation. I High: disable, Low: attenuation

14 Not Connected - -

15 Not Connected - -

GaN Power Amp Pallet RFM245-10 Korean Facilities : 82-31-8069-3036 / rfsales@rfhic.com All specifications may change without notice US Facilities : 919-677-8780 / sales@rfhicusa.com 3 / 5 Version 1.2 Block Diagram & Outside Picture PLL Digital ATTN. BPF OUTPUT HPA Detection

GaN Power Amp Pallet RFM245-10 Korean Facilities : 82-31-8069-3036 / rfsales@rfhic.com All specifications may change without notice US Facilities : 919-677-8780 / sales@rfhicusa.com 4 / 5 Version 1.2 Outline Drawing RF Output Connector (D-Sub.) Control Connector ( D-Sub.) DC CAUTION TO DAMAGE FROM E.S.D OR E.M.I THIS DEVICE IS SUSCEPTIBLE WHEN THE CASE IS OPEN NC RF Output GND (RF) +40V (RF) I/O FWD Detector RVS Detector TEMP Alarm V612 TTL_Enable NC NC GND (FAN) +12V (FAN) NC FAN

GaN Power Amp Pallet RFM245-10 Korean Facilities : 82-31-8069-3036 / rfsales@rfhic.com All specifications may change without notice US Facilities : 919-677-8780 / sales@rfhicusa.com 5 / 5 Version 1.2 Measure Date 100W Output (Max.) 31.5dB Attenuation Output (Min.)

Revision History

Part Number Release Date Version Modification Data Sheet Status RFM245-10 2013.02.25. 1.2 Fixed, over temperature shut down - RFM245-10 2013.02.19. 1.1 New datasheet format - RFM245-10 2011.05.20. 1.0 Initial release of the datasheet - RFHIC Corporation reserves the right to make changes to any products herein or to discontinue any product at any time without notice. While product specifications have been thoroughly examined for reliability, RFHIC Corporation strongly recommends buyers to verify that the information they are using is accurate before ordering. RFHIC Corporation does not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC Corporation and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such unauthorized use. Sales, inquiries and support should be directed to the local authorized geographic distributor for RFHIC Corporation. For customers in the US, please contact the US Sales Team at 919- 677-8780. For all other inquiries, please contact the International Sales Team at 82-31-8069-3036.