RFC1G18H4-24 RFHIC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

WWiiddeebbaanndd AAmmpplliiffiieerr RRFFCC11GG1188HH44--2244 ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 6.0 Product Features Application

  • GaN MMIC
  • Very Low Distortion
  • Guaranteed Broadband Power Gain
  • Heat Sink 99.9% Copper, Ag or Gold Plate
  • Excellent Thermal Conductivity
  • Single Supply V oltage @ 24V
  • No External Circuit needed
  • Drive Amplifier

Description

The RFC1G18H4- 24 is specifically designed for up to 1GHz in frequency as amplifiers. This hybrid dynamic range amplifier module operates with a single voltage supply of 24V(DC). The RFC1G18H4- 24 is equipped with over-voltage suppressor. Specifications Absolute Maximum Ratings PARAMETER MIN MAX UNITS VDD / VRFOUT 0 28 VDC RFIN (Single Tone) - +30 dBm Storage Temperature -40 +100 ℃ Operating Temperature -20 +100 ℃ Electrical Specifications (TA = +25℃, VDD = 24V) RFC1G18H4-24 PARAMETER MIN TYP MAX Bandwidth (MHz) 20 - 1000 Gain @1000MHz (dB) 18.0 19.0 - Gain Flatness @20-1000MHz (dB) - 1.5 2.0 Input / Output VSWR 2.5 : 1 2.0 : 1 IP3 (dBm)@20-1000MHz 43.0 44.0 - Power Output 3dB Comp. @20-1000MHz (dBm) 35.0 36.0 IMD3 (dBc) Two Tone 20dBm Output @20-1000MHz 46 48.0 - Noise Figure (dB) @ 20-1000MHz - 3.0 7.0 Supply Current (mA) 500 550 600 Package : DP-27

WWiiddeebbaanndd AAmmpplliiffiieerr RRFFCC11GG1188HH44--2244 ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 6.0 Parameter Units Typical Frequency MHz 20 500 1000 S21 - Gain dB 19 19 20 S11 – Input Return Loss dB -10 -13 -20 S22 – Output Return Loss dB -12 -10 -14 P3dB dBm 36 37 36 OIP3 dBm 45 45 44 Noise Figure dB 7.0 2.5 4.5 Supply V oltage V 24 Current mA 550 20 100 200 300 400 500 600 700 800 900 1000 Frequency(MHz) Noise Figure(dB) 20 100 200 300 400 500 600 700 800 900 1000 Frequency(MHz) OIP3(dBm) 20 100 200 300 400 500 600 700 800 900 1000 Frequency(MHz) Magnitude(dBm) -50 -40 -30 -20 -10 200 400 600 800 1000 1200 1400 1600 1800 2000 Frequency(MHz) Magnitude(dB) S21 S11 S22 Typical RF Performance at 25℃ S-Parameters Noise Figure Power Output 3dB Compression OIP 3

WWiiddeebbaanndd AAmmpplliiffiieerr RRFFCC11GG1188HH44--2244 ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ rfsales@rfhic.com ▪ Version 6.0

Applications

  1. On the power input port (Pin#5), 47uF/35V capacitor GND is recommended. 2. Heat sink should be placed as tight as possible to the metal case. 3. Pay attention when handling electrostatic-sensitive devices. - Person at a workbench should be earthed via a wrist strap and a resistor. - All mains-powered equipment should be connected to the mains via an earth-leakage switch. - Equipment cases should be grounded. - Relative humidity should be maintained between 40% and 50%. - An ionizer is recommended. - Keep static materials, such as plastic envelopes and plastic trays etc., away from the workbench. 4. One must put the power off, before adjusting the in/output matching of the system. 5. Pay close attention to the input voltage not to over power the hybrid. 6. Do not open the Plastic cover to change the matching inside the hybrid. Package Dimensions (Type: DP-27) Pin No. Function 2,3,7,8 RF Input Ground Vcc RF Output RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time w ithout notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, inclu ding without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase or ders. RFHIC products are not intended for use in life support equipment or application where ma lfunction of the product can be expected to result in persona l injury or death. Buyer uses or sells such products for any such unintended or unauthorized applicatio n, buyer shall indemnify, protect and hold RFHIC and its direct ors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC.