RF9076 REYCONNS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
Ceramic Package for Surface Mounted Technology (SMT) RoHS compatible Package size 3.00x3.00x1.25mm3 Package Code DCC6C Electrostatic Sensitive Device(ESD) Package Dimensions (Unit: mm) Pin Configuration Marking Description Test Circuit（Bottom View） S.S.G. 0dBm Rg Ri Vi Rg=Ri=50Ω Pin No. Description
2 Input
5 Output
1,3,4,6 Case Ground RF R Manufacturer F SAW Filter
9076 Part Number
- Pin 1 YYWW Year Code & Week Code
- YYWW RF9076 *Fig：If the products produced in 06th week of 2015, The year code & week code is 1506.
REYCONNS SAW Filter RF9076 REYCONNS CHINA LIMITED www.reyconns.com Performance Maximum Rating Item Value Unit DC Voltage VDC 3 V Operation Temperature T -40 ~ +85 ℃ Storage Temperature Tstg -55 ~ +125 ℃ RF Power Dissipation P 10 dBm Electronic Characteristics Test Temperature: 25 ℃±2℃ Terminating source impedance: 50 Ω Terminating load impedance: 50 Ω Item Minimum Typical Maximum Unit Center Frequency fc 1575.42 MHz Insertion Loss(min) IL 8.0 9.5 dB Insertion Loss 1573.42 – 1577.42MHz IL 8.5 10.5 dB Amplitude Ripple (p-p) 1573.42 – 1577.42MHz △ɑ 0.8 2.0 dB Group Delay Ripple 1573.42 – 1577.42MHz GDR 20.0 60.0 ns Absolute Attenuation ɑ DC - 780.00 MHz 50.0 55.0 dB 780.00 - 1160.00 MHz 40.0 45.0 dB 1160.00 - 1530.00 MHz 25.0 30.0 dB 1561.00 MHz 15.0 30.0 dB 1600.00 - 2200.00 MHz 25.0 30.0 dB 2200.00 -3000.00 MHz 20.0 25.0 dB Input VSWR 1573.42 – 1577.42MHz 1.8:1 2.0:1 / Output VSWR 1573.42 – 1577.42MHz 1.8:1 2.0:1 /
REYCONNS SAW Filter RF9076 REYCONNS CHINA LIMITED www.reyconns.com Frequency Characteristics Frequency Response Frequency Response（wideband） Delay Ripple & S11 VSWR Phase Linearity & S22 VSWR S11 Smith Chart S22 Smith Chart
REYCONNS SAW Filter RF9076 REYCONNS CHINA LIMITED www.reyconns.com Reliability（The SAW components shall remain electrical performance after tests） No. Test item Test condition
1 Temperature
(1) Temperature: 85℃±2℃ , Duration: 250h , Recovery time: 2h± 0.5h (2) Temperature: –55℃±3℃ , Duration: 250h ,Recovery time: 2h± 0.5h
2 Humidity Test Conditions: 60℃±2℃ , 90~95% RH Duration: 250h
3 Thermal Shock
Heat cycle conditions: TA= -55℃±3℃, TB=85 ℃±2℃, t1=t2=30min, Switch time: ≤3min, Cycle time: 100 times, Recovery time: 2h±0.5h.
4 Vibration Fatigue
Frequency of vibration: 10~55Hz Amplitude:1.5mm Directions: X,Y and Z Duration: 2h 5 Drop Test Cycle time: 10 times Height: 1.0m
6 Solder Ability Test
Temperature: 245℃±5℃ Duration: 3.0s --5.0s Depth: DIP--2/3 , SMD--1/5
7 Resistance to
(1)Thickness of PCB:1mm , Solder condition: 260℃±5℃ , Duration: 10± 1s (2)Temperature of Soldering Iron: 350℃± 10℃ , Duration: 3~4s , Recovery time : 2 ± 0.5h Recommended Reflow Soldering Diagram
REYCONNS SAW Filter RF9076 REYCONNS CHINA LIMITED www.reyconns.com Packing Information Carrier Tape * B0: 5.35 for QCC8C; 4.15 for DCC6/QCC8B; 3.35 for DCC6C/QCC8D Reel Dimensions Outer Packing Type Quantity Dimension Description Weight Internal box 1000 190× 188× 42 carton box 2 reel / internal box 5 boxes / external box 0.18 External box 10000 235× 205× 210 1.80 Unit: mm Unit: kg Notes 1. As a result of the particularity of inner structure of SAW products, it easy to be breakdown by electrostatic, so we should pay attention to ESD protect in the test. 2. Static voltage between signal load and ground may cause deterioration and destruction of the component. Please avoid static voltage. 3. Ultrasonic cleaning may cause deterioration and destruction of the component. Please avoid ultrasonic cleaning. 4. Only leads of component may be soldered. Please avoid soldering another part of component. 5. There is a close relationship between the device's performance and matching network. The specifications of this device are based on the test circuit shown above. L and C values may change depending on board layout. Values shown are intended as a guide only.