DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

 RoHS compatible  Package size 10.9x4.45x5.00mm 3  Package Code SC04-06  Electrostatic Sensitive Device(ESD) Package Dimensions (Unit: mm) Pin Configuration Marking Description Test Circuit（Bottom View） Pin No. Description

1 Input

4 Output

2,3 Case Ground R Manufacturer RF F SAW Filter

1118 Part Number

  • Pin 1 YYWW Year Code & Week Code YYWW 4MAX 4-φ0.45 4.45 2.54x3=7.62 2.54 1 2 3 4 10.9 RF1118 *Fig：If the products produced in 06th week of 2015, The year code & week code is 1506.

R E Y C O N N S S A W F i l t e r R F 1 1 1 8 REYCONNS CHINA LIMITED www.reyconns.com Performance Maximum Rating Item Value Unit DC Voltage VDC 3 V Operation Temperature T -40 ~ +85 ℃ Storage Temperature Tstg -55 ~ +125 ℃ RF Power Dissipation P 15 dBm Electronic Characteristics Test Temperature: 25 ℃±2℃ Terminating source impedance: 300 Ω Terminating load impedance: 300 Ω Item Minimum Typical Maximum Unit Center Frequency fc 110.592 MHz Insertion Loss(min) IL 3.5 4.5 dB Insertion Loss 109.85-111.35MHz IL 4.8 5.5 dB Amplitude Ripple (p-p) 109.85-111.35MHz △ɑ 1.2 1.8 dB Group Delay Ripple 109.85-111.35MHz 500 800 ns Absolute Attenuation ɑ DC-100.000 MHz 45.0 50.0 dB 105.416-107.144MHz 40.0 45.0 dB 107.144-108.872MHz 35.0 40.0 dB 112.328-114.056MHz 25.0 28.0 dB 114.056-115.784MHz 35.0 40.0 dB 150.000-800.000MHz 50.0 55.0 dB Input VSWR Output VSWR

R E Y C O N N S S A W F i l t e r R F 1 1 1 8 REYCONNS CHINA LIMITED www.reyconns.com Frequency Characteristics Frequency Response Frequency Response （wideband） Delay Ripple & S11 VSWR Phase Linearity & S22 VSWR S 1 1 S m i t h C h a r t S 2 2 S m i t h C h a r t

R E Y C O N N S S A W F i l t e r R F 1 1 1 8 REYCONNS CHINA LIMITED www.reyconns.com Reliability （The SAW components shall remain electrical performance after tests） No. Test item Test condition

1 Temperature

(1) Temperature: 85 ±2 , Duration: 250h , Recovery time: 2h±0.5h℃℃ (2) Temperature: –55 ±3 , Duration: 250h ,Recovery time: 2h±0.5h℃℃

2 Humidity Test Conditions: 60 ±2 , 90~95% RH Duration: 2℃℃ 50h

3 Thermal Shock

Heat cycle conditions: TA=-55 ±3 , TB=85 ±2 , t1=t2=30min, Switch ℃℃ ℃℃ time: ≤3min, Cycle time: 100 times, Recovery time: 2h±0.5h.

4 Vibration Fatigue

Frequency of vibration: 10~55Hz Amplitude:1.5mm Directions: X,Y and Z Duration: 2h 5 Drop Test Cycle time: 10 times Height: 1.0m

6 Solder Ability Test

Temperature: 245 ±5 Duration: 3.0s℃℃ --5.0s Depth: DIP--2/3 , SMD--1/5

7 Resistance to

(1)Thickness of PCB:1mm , Solder condition: 260 ±5 , Duration: 10±1s℃℃ (2)Temperature of Soldering Iron: 350 ±10 , Duration: 3~4s ,℃℃ Recovery time : 2 ± 0.5h Recommended Reflow Soldering Diagram

R E Y C O N N S S A W F i l t e r R F 1 1 1 8 REYCONNS CHINA LIMITED www.reyconns.com Notes 1. As a result of the particularity of inner structure of SAW products, it easy to be breakdown by electrostatic, so we should pay attention to ESD protect in the test. 2. Static voltage between signal load and ground may cause deterioration and destruction of the component. Please avoid static voltage. 3. Ultrasonic cleaning may cause deterioration and destruction of the component. Please avoid ultrasonic cleaning. 4. Only leads of component may be soldered. Please avoid soldering another part of component. 5. There is a close relationship between the device's performance and matching network. The specifications of this device are based on the test circuit shown above. L and C values may change depending on board layout. Values shown are intended as a guide only.